Watches

↑ Top

Error creating thumbnail: Unable to save thumbnail to destination

Community Links

Watch Buy/Sell/Trade Forum

Watch Quality Tiers

Grouping	Tier	Avg Price	Example Factories/Sources	Features (not exhaustive)
Shitters	Junk	> $70	Unknown	Folded tin bracelet, bad cyclops, cheap movement, incorrect print/markers
Shitters	Entry	$70-160	'AAA', U1, GDF, TTF, TWF, SK, WWF	Screw/pin bracelets, better quality bracelet, better cyclops, incorrect datewheel/placement, average weight. Note that AAA is not a factory, just a quality level.
Mid	Mid	$160-400	BP, EWF, GMF, K11	Improvements on above, better dial print/markers, medium quality bracelet
High Tier	High	$400-800	VSF, CLEAN, GF, PPF, 3K, ZF, GMF, R8F, BBR, RRF, OMF, AF, APS	Closer to 1:1 quality, on NWBIG list, better bracelet quality, correct placements/markers
High Tier	Epic	$800+	Check NWBIG List	Over the top builds, customs, excessive gems, complex reps, tourbillion, correct placements/markers

Trusted Dealers List

This is a list of Trusted Dealers for r/RepTime tier sales and have undergone a strict process to be approved as a TD.

The websites & email addresses listed here are the only one to be used. Any other website found online or in a post other than from the dealer itself are not recommended. Be careful, copycat websites are one of the most common scam out there and their addresses are very similar. Do your due diligence before making any online order.

Andiot Watches
https://andiotwatches.com

Asian7750
https://www.asian7750.co

ChazingTime
https://chazingtime.io

Dealer Clocks
https://dealerclocks.to

Davidsen Watches
https://www.dsnwatches.com

Duke Jones
https://www.dukereps.com/

Geek Time
https://geektime.watch/

HontWatch
Web: http://www.hontwatch.ru/
WhatsApp: +86 131 1330 7655

InTime Watches
https://www.intime06.co

Jtime Watch Store
https://jtime.io

Mirotime
https://mirotime.io/

Narikaa
https://narikaa.smugmug.com/

Perfect Clones
https://www.pfc8388.com/

PureTime
https://PureTimeWatch.io

TheOneWatches
https://www.theonewatches.io/

Toro Bravo
http://www.trb88.club

Watch Eden
http://www.WatchEden.net

Trusty Time
https://trustytime888.io/

Extended list:
https://forum.replica-watch.info/forums/trusted-rep-dealers.147/

Last update 10/06/23

Recommended Sellers List

Below is a list of sellers verified through the community as having a variety of content and confirmed legitimacy as a seller at r/ChinaTime tier. Their product quality will range from bottom shitter to high tier, based on your request, preferences, cost and QC approval.

These are different to a Trusted Dealer (or TD) at r/RepTime level, as these TDs go through a stringent review process

How to buy

Contact your preferred Recommended Seller or Trusted Dealer with a photo/link of the watch you want.

Wait for them to reply with price & availability.

Sellers list

WuWatch
Web: https://wuwatch.cartel.click/
Dhgate: https://www.dhgate.com/store/21178530
WeChat: WuWatch-
WhatsApp: +86 199 2759 6945
Yupoo: N/A

Duke Jones
Web: https://www.duke-jones.com/
WhatsApp: +852 6744 9430
WeChat: Dukejones888
Discord: dukejones_watches
https://p719583387.x.yupoo.com/albums PW: 888888

Newmen Time
WeChat: HTL2018_RX_123213819
WhatsApp: +86 152 9889 6876
Discord: newmen_rich
Yupoo: https://newmentimepiece.x.yupoo.com/ Pw: 213514

The One Watches
Dhgate: N/A
Web: https://www.theonewatches.io/
WeChat: The5711
WhatsApp: +86 170 8193 4955
Email: Theonewatches.ru@gmail.com

Jason007
Dhgate: https://www.dhgate.com/store/14498114
Web: https://u-onewatch.com/
WeChat: N/A
WhatsApp: +86 159 1439 7518 & +86 137 3343 7007 (Aaron: +86 186 7944 2775)

Andiot Watches
WeChat: andiot2022
WhatsApp: +86 151 210 37121
Website: https://andiotwatches.com
Facebook: https://www.facebook.com/groups/198214499927656/
Yupoo: https://andiotwatches.x.yupoo.com/albums/
Reddit: Andiotwatches
Discord: andiotwatches_88391

Time Mimic
WeChat: timemimic
WhatsApp: +86 156 1356 1120
Website: https://time-mimic.com
LinkTree: https://linktr.ee/timemimic
Reddit: timemimic1314
Discord: goldfish_07647

Necoclock
WeChat: necoclock
WhatsApp: +85 255 373 282
Website: https://www.necoclock.ru

Btime
Dhgate: https://www.dhgate.com/store/20042879
Web: https://58vakcak.com/
WeChat: N/A
WhatsApp: +86 185 8882 2256

Hanbelson
Dhgate: https://www.dhgate.com/store/20777759
Yupoo: https://hanbelsonwatch.x.yupoo.com/ PW: 2022930

lkwatches
Dhgate: https://www.dhgate.com/store/19780983

Stas
Dhgate: https://www.dhgate.com/store/21229352

Bilibili_watch
Dhgate: https://www.dhgate.com/store/21059386
Yupoo: https://zywatch.x.yupoo.com

Luxurywatches 1
Dhgate: https://www.dhgate.com/store/21113018
Yupoo: https://kevin-snir.x.yupoo.com/

Fujimin003
Dhgate: https://www.dhgate.com/store/20539379
Yupoo: https://alan-123456.x.yupoo.com/albums

Watch GT01
Dhgate: https://www.dhgate.com/store/21347248

Joan007
Dhgate: https://www.dhgate.com/store/20952500

Hello_watch
Dhgate: https://www.dhgate.com/store/20223682

lussoreloj
Dhgate: https://dhgate.com/store/21441757

Mark1994
Dhgate: https://dhgate.com/store/20535850

New Sellers List

This is a list of sellers that have been vetted and newly introduced to the community.

After a number of successful sales, they are moved from New Sellers to the Recommended Sellers list.

5Awatch
WeChat: enma0313 / +86 155 946 55620
WhatsApp: +86 155 910 76016
Website: https://www.5awatch.com/
Yupoo: https://5awatch.x.yupoo.com/

Aron Watch
WeChat: AronWatch
WhatsApp: +86 132 9531 376
Discord: gongtk0314
Instagram: aron_Watch1
Yupoo: https://alungwatch.x.yupoo.com/ Pw: 000000

Ada Watch
WeChat: ZengJ-Jnu
WhatsApp: +852 9371 8859
Discord: adawatch
Web: https://www.awesomerolex.com
Yupoo: https://zhangyida9.x.yupoo.com/albums

Fashion King
WeChat: Luckyyss7
WhatsApp: +852 5145 1388‬
Discord: .ramosmagdalena
Reddit: Leahbhi
Yupoo: https://fashionkingluxury.x.yupoo.com/

Nick Watch
WeChat: nickwatch98
WhatsApp: +86 199 1465 3665
Reddit:
Discord: nickwatch
Dhgate: https://www.dhgate.m/store/21874246

YeKing
WhatsApp: +86 158 1552 3113
Reddit: r3pwatches
Discord: yeking._81854
Website: Under construction

Watchify
WeChat: wxid_2450itbyjfcs21
WhatsApp: +86 15022356134
Reddit: u/Outside_Conflict6915
Discord: watchify_02240
Website: https://watchify.top/

1688 Sellers List

Biguan

***(CLOSED)***
WeChat: Lanco82234504

WhatsApp: +86 181 0221 7714 (Assistant)

Telegram ID: 8618102217714

Lin Feng

WeChat: noob88551

Website: https://weidian.com/?userid=1878165008&share_relation=987a630c94311830_1741519095_1&wfr=BuyercopyURL

Deloveg:

WeChat: h222222288888

Email: 137651846@qq.com

Website: below in the comment.

David

Whatsapp: +86 1956 3020 400

WeChat: Junyou1009

Email: 923374261@qq.com

Telegram: https://t.me/DavidTimepieces

Website: https://a202108011254448300001888.szwego.com/static/index.html#/shop_detail/A202108011254448300001888

Watch-VS

Wechat: dou-biao

Whatsapp: +86 135 7016 5593

Website: www.watch-vs.com

Weidan: https://weidian.com/?userid=167260324&wfr=wx&ifr=itemdetail&source=home_shop&sfr=app

Li Li

WeChat: AZQY9988

Whatsapp: +86 131 4935 9680

Website: https://a201803310145220380026826.szwego.com/static/index.html#/shop_detail/_dHwqfQqy-5_nRcvVT-bG4Kl1i3iS76oW2zjbD9Q

6. New Times Watches - Jason

Whatsapp: +1 631 334 8593

Reddit: u/NewTimes_shop

Website: https://a202311092223213732001336.szwego.com/static/index.html#/shop_detail/A202311092223213732001336

Automan

Whatsapp: +86 173 1689 4543

Andiot

Whatsapp: +86 151 2103 7121

WeChat: andiot2022

Website: : https://andiotwatches.com/

Telegram: u/ElliotBlack2012

Mr Zhang

WeChat: d306009

*he said he can be reached on Skype, waiting for details

Website: https://detail.1688.com/offer/728746193557.html?spm=a26352.13672862.offerlist.141.737a1e62jiA1ig

UsdCome Watches

WeChat: 13101771592

Whatsapp: +8613101771592

Skype: usdcome

Email: usdcome@hotmail.com

Jade/Strangewatch

WeChat: Strangewatch (changed by the seller)

Whatsapp: +852 668 25090

Telegram: to be confirmed

S3AL-Time

Wechat: S3AL-TIME

Reddit: u//S3AL-TIME

Trish

Wechat: NicolasWatches

Whatsapp: +39 3791 785 437

Reddit: u/TrishYou

Heping

WeChat: wsu58999

YonXing

Telegram: @yonxingwatches

WeChat: yonxingwatch

Reddit: u/D-ConsumerGMT

Email: yonxing001@gmail.com

Weidian Warriors Seller List

Chez Pierre

Perfumes. The best in the industry. Discover your favourite scent by visiting below! Chez is based in Europe - ordering is usually direct to customer instead of through an agency.

https://chez-pierre.com/

Boring Developer (Customs)

Just a guy who does custom shoes... but very, very well. The quality on his pairs, as well as the details will impress. He's more of a very high end seller, who does customs as well as replicates actual pairs very well.

https://developerboring.com/

ZZZTOPXX

All the types of clothing, designer, and other bags you could imagine. Decent prices, and pretty good products. Browse around and check for yourself.

https://zzztop.x.yupoo.com/albums

Shark Breeder

A new seller, stocks many products with very good prices/ discounts! He's currently trying to prove himself to the foreign market, but he's got great products and will eventually grow in reputation because of his immaculate customer service. 1cm 1cm is run by a very important person in the replica scene - he's a crucial agent for a very important factory in China. This is his store with great offerings, good prices, and fantastic quality! Check him out today.

668

668 is an up and coming ambitious seller, with a lot of knowledge, and shoes! They've got great prices for great batches, and great sales as well. Hit them up!

001sports

A great new seller on the block, they’ve got great prices for all your essentials… and more. Definitely a to-go to seller if you’re looking to snag a bargain!

Cappuccino

A staple of rep buyers for a very long time, Cappuccino is well renowned in the foreign rep community and in China as well. We have probably all bought from Cappuccino and can agree that he's very solid. Very nice guy as well.

A new seller within Kobe reps! They've got their own factory line, and produce batches. They specialize in production, take a look for the best looking Kobe shoes.

PAI

A new up and coming seller, PAI provides everything you need, with great service! He's one of the subreddit's to-go-to sellers, check him out below!

Harry

Harry sells many great designer shoes, at affordable prices. He's a reliable outlet for designer shoes, and can be trusted with your orders. Check him out!

3madman

3madman are well known for their high-quality products of several brands. They focus primarily on Corteiz, Trapstar, ADWYSD, Fendi, Aime Leon Dore, Protect Ldn, Badfriend, Carpet. They have many more gems readily available, check them out now!

No. 1 in Tianjin

He's a great seller, very popular in China, and has numerous fronts from which he sells a large selection of products. He's known for his high-tier discounts, and prices on lower tier/ discounted defective pairs. Highly recommended/ vouched for by many buyers.

Sneaker King

This seller sells multiple models at great prices, and sells great pairs of sneakers. Definitely a new go-to seller if you're wanting good service, sneakers, and even some fun! Check them out below.

A1Top

The most popular seller in mainland China, and one of the most popular Weidian sellers on larger forums + with beginners. Good seller, however does not have a massive reputation built up in budget forums. Still, a very good seller and definetely one who has almost everything.

CSJ

Essential seller. Renowned for their shoes, have a very good reputation regarding high tier sales, and shoes. Definitely a classic seller.

7UP

Massive seller as well, although has a faltering reputation due to numerous controversies a few months ago. Has taken steps to fix this, and although there have been some mistakes, he has often done very well at satisfying his clients - so if he can put this stuff behind him, he is forgiven. In my opinion, he holds the best sales in terms of discounted defective pairs, even if they are sometimes inconsistent. He is the only seller that holds GX defective products. I would highly recommend 7UP, although several people wouldn't feel the same - those are the ones who have not been consistent customers of his for numerous years.

Extremely friendly, kind, and has great sales. One of the to-go to sellers in terms of sales, and if you want very good stuff at a low price! Check them out below.

Budget Shoes

A good option for some budget sneakers, they’ve got some unique choices for buyers, including Slides that go up to very large sizes. Check them out with the links provided below!

Big Player

Has some high tier bangers at pretty decent prices, as well as very good lower tier sales. Often has a lot of discounted stuff. Renowned in China, highly recommended for sales items. He's a very nice guy as well, although I sometimes refer to him as Super Player forgetting that his name is really Big Player instead of Super Player.

GTR

A seller that burst onto the scene a while ago with very good sales pieces and good discounts on higher tier batches. Very interesting person to talk to as well, and provides great products for buyers.

DargonRep

Has a wide variety of products that suit a lot of people, very versatile style/ fun items as well! Very well known in communities for his production, and rising in reputation. Check him out!

Introduction to Replica Watches

Replica watches are a weird thing. People from r/reptime love the word “replica” and get butt-hurt when their $400 Rolex is called “fake”. We can understand that, as those replica watches can truly be works of engineering themselves and can even be of the same quality as the pieces that inspired them.

At Chinatime, though, we do not put on such airs. If our watches are fake-ass watches that cost less than some of my Uber trips, and that’s OK.

We could spend a lot more money on arguably better watches that look more like the originals, but there’s something truly rewarding about tracking down a treasure on Ali Express or DH Gate that looks close enough to the genuine article for $50 that one simply can’t be found when ordering one of the master-class Reptime watches. Sure, one day I’ll have an ARF* or Noob Submariner that would fool my Rolex rep, but for now my U1 Submariner fools my Uber driver and parole officer, and for now that’s good enough for me. Oh, it keeps good time, too, which is nice.

Getting started

If you’re here to learn more about this world, then that’s great, because this interest in cheap rep watches that you have may turn into a hobby, which may then turn into an obsession. I’ve made friends on this subreddit because that’s what like-minded people do when they all become fans of the same thing, and we’re happy you’ve decided to learn more with us.

Automatic vs Quartz

To get started it helps to know a bit about watches themselves, besides how they look. Most of the watches we talk about in this subreddit are what are referred to “automatic” watches. Most watches in the world are quartz, but for the most part they don’t carry much weight here, because most of the watches we’re interested in the fake-versions-of are automatics, not quartz. This is because quartz watches can literally be found in vending machines, but automatic watches have a degree of engineering and craftsmanship to them, even the cheapest of them. Also, most of the Swiss shit we can’t afford are autos, as well.

An automatic watch is simply one that is wound by the person wearing the watch simply doing their shit. There’s no battery; instead there is a rotor that is connected to the mainspring of the watch. As the wearer does whatever the fuck it is they do all day, their movement moves the rotor, which acts as a pendulum, which winds the watch, and then it tells the user what time it is so they can get home in time to catch their wife in bed with their boss. These are the important matters we deal with.

Not all the watches we deal with here are autos, but the vast majority of them are. Quartz units are generally relegated to the chronograph copies (which means “watches that are also stopwatches that you’ll never actually use”), though there are a few non-chrono quartzes peppered here and there, but not many.

The Rotor & Movement

The rotor of an automatic watch is mounted on what’s called the movement of the watch. The movement is not the sweep of the seconds hand but rather the name for the guts of the watch itself — the gears, the springs, the cogs, and everything else that makes a watch keep time. It is arguably the most important part of a watch to consider when making buying choices, so knowing a few basics can really help you to make the right choice when it comes time to buy your first watch.

For example, a large percentage of the watches on Chinatime will be built around a fairly generic movement called the 2813. The 2813 is a Chinese clone of the Japanese Miyota 8205/8215 movement, which is to be found in a number of Citizen brand watches, as well as high-end Invicta divers and many, many more. The Miyota is a well-respected and sturdy movement, but the 2813 clones not so much. The most famous of these clones is the DG2813, though the rest are made by several factories in China. Because of this the quality varies from movement to movements and thus watch to watch, since there’s very little in the way of quality control when the Chinese factories make our watches for us. This is part of why they’re so cheap, and really part of the fun and charm.

Fun fact! There is an ETA2813 that is an actual Swiss movement, and the Chinese 2813 (often called a2813 where “a” means “Asia”) may have started life as a clone of it, but it’s a Miyota clone now, so there we go.

So now you know what a movement is and why it’s important, but that’s not what you’re here to find. You’re here to find some timepiece that will act as either a panty-moistener or pants-tightener when you wear it around your town/school/cellblock/institution, and most people don’t care about the movement.

Finding the watch you want (or ‘W2C’ aka Want To Cop/obtain)

You probably instead already have a model of watch in mind that you’d like to find a cheap rep for, and there’s a really good chance that there’s at least some Chinatime-budget version out there for you. It’s just a matter of finding it, and that is where this subreddit shines, because chances are that some other cheap fuck had the exact same idea as you, and since so many of our users share their triumphs with the rest of us there’s a good chance you’re watch is linked to in one of the posts already here. I know most subreddits have a “search it first” mantra, and that’s because that shit works, so use it.

If your watch has been found and purchased before, and the users reported back here (which they should do, more on that later), then you can usually find in their post or comment a link to the watch they bought under the label of “W2C”, which stands for “Want to cop”, which is a weird phrase brought over from Chinatime’s big dickhead brother Reptime. Cop or w2c means to “get your hands on” and “want to” is something none of Harvey Weinstein’s victims ever said.

Using DHGate

So you find the watch, find the W2C link, and then you’ll be taken to a place to buy the watch. Usually that place will be DHGate, (or The Gate,) a Chinese website that’s sort of a second home for us here. That’s because The Gate has about a thousand vendors selling about a couple hundred (at least) different rep watches at a variety of price points, meaning that you’ll probably be able to find your watch there at the price you want.

DHGate is hard to navigate for most of us because it’s a Chinese website in English and they do a very poor job of quality control when it comes to organization of products. This may be on purpose — selling fake versions of real watches violates international law, and by not making it easy to find a particular watch they get a bit of reasonable deniability when questioned by the authorities. But with some practice, patience, help from here, and luck, you’ll be able to find what you’re looking for.

Fun fact! Buying replicas of real watches for a fraction of the price is understandably illegal in most countries, so all of us here are, technically, taking part in a huge act of fraud and/or larceny, you newly-minted criminal you. The good news is that Customs in most countries are far too busy with actual problems to really care about what we do here, so don’t sweat the whole petty felony thing too much.

So you’ve got your watch in mind, you’ve searched for the W2Cs on here and found a few, and even checked out the links on The Gate, which is awesome, because that means I’m doing a good job here. The next logical step is choosing which rep watch to get, and this is where things can get a bit tricky — not to mention sketchy.

This may surprise some of our more sensitive newcomers, but it has to be said: Not all of the vendors on sites like DHGate can be trusted! In fact, it’s best to assume that most of them are out to scam you, because it’s very easy to scam someone on the Internet from a completely different hemisphere, and it happens all the fucking time. But you don’t want it to happen to you, and neither do we, so this next part is for you: Do your fucking research.

Also, use our guide of trusted sellers.

There are a few vendors that we like to go to again and again (more on them later) because they are simply good to work with. Some of them might be a couple bucks more expensive here and there but it’s made up for with customer service and not getting your credit card charged for $2500 in the middle of the night in Hunan Province.

Navigate & Communicate on the ‘Gate

It’s worth noting that in Chinese culture there is (traditionally speaking) no such thing as “customer service”. Our western notion of sales customs, where the vendor caters to the customer, is not universal, and certainly not the norm in parts of Asia. This is an important thing to keep in mind, as things don’t always go smooth, and acting like a total Karen will get your messages blocked and you’ll never get a resolution. Always be respectful (but not a sucker) and things will go a lot smoother.

When looking over the different offerings from the different vendors, the two most important things you can do are:

Ask us for advice, such as “has anyone else here ever dealt with ‘TittyBobbyJill20000057’?
Check the customer reviews on the product you’re looking at!

As noted before, there are a lot of independent vendors on The Gate and the other sites, and chances are you’re not the first person looking for your particular watch, so learn from the mistakes and successes of those who came before you. Feel free to ask anyone here, and always — always! — check the customer reviews, especially if they have photos.

Fun fact! There are a few search terms you can use to find the watch you want since you generally can’t find them via their actual brand names because that just becomes blatant counterfeiting, and we can’t have that. For Omegas, search for “co-axial”; for Rolex, search for the model number; for Tag Heuer sports watches, search for “I have no taste in anything and will die alone”. Try it out yourself!

This is because very often the photos of the watch you see on the DHGate listing is not a photo of the actual watch you’ll be receiving. Often it’s the genuine (or “gen”) article in the photos, presumably to help shoppers find what they want. They will often have pictures of the actual units they sell mixed in, so check those, but make sure to check for photos of received units in the reviews, as these are unfiltered and unmoderated feedback directly from and to customers like you. It’s a great tool that will save everyone a lot of grief and headache if used correctly.

Asking for Quality Check (QC) Photos

In addition, reputable vendors are often happy to send you photos of the actual watches themselves if there are none in the reviews. Add to that the fact that we love doing our own reviews here, and you’ll be in good shape to buy the watch you want from a trusted seller and be very happy with it.

This, though, is where things get tricky. Since sites like DHGate and AliExpress are in China, not every bank or credit card vendor will work to place your order, so make sure that you have at least two different accounts to try from. In addition, keep in mind that there are sophisticated hacker-bros in China that would love nothing more than have access to a foreign credit card that works in their country easily. For my own purchases, I use my CapitalOne credit card via their Eno system which generates a one time “burner number” for each of my transactions. See if your cards or bank offer the same kind of thing if at all possible.

If you’ve found your watch, and you’ve found your vendor, and made your purchase, then you should have your watch — sometime in the distant future.

Shipping from China

Cheap quality watches are cheap by skimping on a few things, and one of those things is fast shipping. Most watches include free shipping, (via China’s EMS or ePacket services,) but that free shipping can take a long fucking time. It’s not uncommon for watches to take a month and a half to arrive, so if you’re in a hurry to get something for a certain event, like a court date, use one of the paid services (DHL, etc.) to get it faster. But keep in mind that you still might be in for a wait, because that’s how things in China work.

Some sellers are faster than others, and your research here should tell you which are known for fast shipments, so it’s worth taking into consideration when making your choice.

Customs & Replica Watches

Sometimes, though, things happen, and it’s far too common for things to go wrong on the shipment part.

Fun fact! Chinese people are a lot like you, only way more broke and oppressed. The average person there makes about $15k a year. The few bucks they make off of selling fake watches to the rest of the world is real money to them, so if things go wacky don’t automatically assume that you’re being scammed, just be aware that they’ll also do anything they can to not have to issue a refund, so be willing to work with them.

If your watch gets seized by customs then you’ll get a letter. Ignore it, tell your vendor, and they’ll generally send you a new one. This kind of thing is factored into their prices as the cost of doing business.

If your tracking number shows your watch going somewhere far away that’s not you, there are a few reasons why this can happen. If you’re shipping with DHL you should know that they often recycle waybill numbers (I’m not kidding, it just happened to me). It’s also possible the vendor just mixed up your tracking number with someone else’s, which is also common. Or, also too common, your vendor is trying to scam you. Do not let them off the hook.

Every case is different, so we won’t attempt to tackle a “how to” on dealing with problems like this on sites like The Gate, but enough people here have been through it that they’ll be happy to help you navigate it, since we hate when those fuckers try stuff on any of us.

Receiving Your New Watch

So let’s say you’ve managed to not fuck up all of the above. That means that your watch has arrived and you’re stoked, and you should be! The process isn’t the easiest, but the reward is worth it.

Wear your watch. Get to know it. Maybe you’ll need to re-size the bracelet (we can help walk you through that) or something’s wrong with it (that, too), or maybe you need to brag to some people (that would be us). That is why we do ask that you share it with us. (Don’t forget the lume shot!)

Take photos, videos, post a review, post a W2C link, and answer any questions others may have, because you were only successful because others pass on their knowledge to you, and it would be good to show the other newcomers how it works. It’s part of what makes this subreddit more than just a place to get links and instead a place that’s genuinely fun to waste time on.

We’re glad you’ve decided to take the morally ambiguous step towards becoming a Chinatime bro or bro-ette (for there are more rep-ladies here than one might think) and welcome you to the world of like-minded cheapskates who would still like to enjoy build quality and the classical aesthetics that go along with world class timepieces.

Written by u/SpaceForceAwakens

Step by Step Guide for Ordering a Watch

Choosing a Recommended Seller or Trusted Dealer

Recommended Sellers and Trusted Dealers are listed above.

Remember, TD's do not make the watches! They are simply the middle men between you and the Factory (VSF for example). Mostly, the TD's do not have physical contact with the factories or watches, they simply order them, then a courier will drop off a bulk order to them. Then the TD will issue QC photos.

Please do not think they walk to the factory to buy your watch and collect it, it's not how it goes. This is also how delays in QC's happen, as a TD could be waiting for a batch of a certain watch to be made, thus, delaying your QC. Some TD's will have 24 hour QC stock on hand, which you can ask for a list of. Usually however this is previously RL stock or something they have bought in bulk to offer as discounted.

Trusted dealers have earned their way to that status – trusted – because they have a large customer base and are willing to go through investigations through the forums that have a tough and active moderation team (RWI, RWG, etc) if a sale goes awry.

Trusted dealers get not a ton of dough from your sale, but they almost all offer a customs guarantee - you will receive a replacement watch for free if customs seizes it. Be nice and remember that they are doing work for you and should be compensated for that time.

2. Choosing Your Watch and/or Factory

A mid to high tier watch is built by a specific factory. Examples will be: CF, VSF, ZF, BP, GMF, EWF to name a few.

There are also watches that are classed as Not Worth Buying In Gen (NWBIG).

All reps have tells. There is no perfect rep, so RESEARCH first and decide on which flaws you can live with.

3. Purchasing a Watch

Now that you have decided on the watch you want, it's time to buy. There are typically three ways to buy. I will list in the order I believe to be the easiest, and how to go about it. I will also give a mock example where applicable. Be aware it is always common practice to check the factory still exists and are still making the watch you require. This to a TD is referred to as "In Stock".

Option1. WhatsApp (or WeChat etc)

Find the correct WhatsApp number for your chosen TD. (The TD links have already been listed in section 1). Message the TD:

(You) Hi, can you source me a (VSF 116610LN) please, are they in stock at the factory still? How long for QC and how much ? Thanks.

Now, there are such things as time zones, so if you don't hear back from the TD in ten mins or so, consider they may be sound asleep. Allow anything up to 12 hours for a reply. Some Td's have massive inbox queues and it could take 24 hours to receive a reply during busy times. The Td will then reply for example:

(TD) Hi, $568 free shipping. In stock 3 day QC.

It's as easy as that, next you will need to issue payment (see section 4) and give your Name and Postal address. The TD may require an email address to send your QC link to, Some send the QC and deal solely on whatsapp.

Option 2. Purchasing via TD's website.

It is imperative you email the TD before you go this route to check the watch is still being produced. A lot of watches on websites are no longer available as they barely maintain their websites by removing old stock. It is also a great way of taking your money and getting you to switch to something else.

You'll have to make an account on the website and/or fill out your details, then, once you have checked out, the TD will contact you for payment (see Section 4). Do not upload any credit/debit card details if asked. Email is a slow process and it could take 3 days to receive payment details. Some Td's only use email, so this is one of the pitfalls of going this route, especially if you encounter a problem once you receive the watch. QC will likely take longer and in general be a slower process than whatsapp. You Have Been Warned!

Option 3. Direct Email/DM via forum.

Some TD's (Sead from supermirrors for example) are only contactable this way. They will list their current stock on their forum page. You will then have to DM or Email them your requirements the same way as mentioned in option 1. This is another reasonably slow process.

You can simply send a photo of a watch you are after to a TD and they will tell you if it can be sourced.

Option 4. Direct from DHGate

Platforms like DHGate have a payment facility which includes a dispute system and more. More details here.

4. Payment

Most TD's will help guide you through the payment process. Here are some of the ways you can pay.

Wise or Western Union

Easiest way?: install the respective apps or visit the official website, create an account and enter the details provided by the TD. Then issue your payment. Best exchange rate is via Wise and it is easy to use. You can even link the TD's confirmed payment via whatsapp with Wise. Guides on how to use both are on their respe websites.

Paypal F&F

Some, if not most will require previous transaction history before they dabble in Paypal with you. Some like Mirotime and Geektime usually accept payments this way first off.

Crypto

Obviously if you pay this way you'll be sending your crypto to a TD's wallet. You'll probably have knowledge on how to use wallets etc. Be sure to record/track the transaction via the blockchain.

4. Credit/Debit card

I would advise against paying via credit/debit card UNLESS you are using a one time use created card number. Many CC company's will provide this. Remember you are dealing in a counterfeit organization ran predominantly (in the eyes of the law) by criminals. Your TD may be Trusted but the third party they use to take payment may not be. Don't risk being cloned or charged for other fee's.

5. QC (Quality Control)

QC photos can take anything from a matter of hours to weeks. It's all dependent on the watch you bought and if the factory are producing batches. Sometime a TD will have stock in hand. Raids, public holidays and batch times can effect the waiting times. If you haven't received QC within 2 weeks ask your TD for an update. It's down to your resolve on if you want to swap to an available watch or require a refund.

Once QC photos are received you should generally get good help over at r/RepTimeQC if you follow the template used there. I would advise to look up previous posts of the watch you ordered to grasp the common QC issues that can arise. Do not be lazy and write "looks good" for everything..

6. Shipping

It can take anything from a week to 2 months to receive a package depending on where you are on the planet. 17Track is a good app to use for keeping an eye on your parcel. Most TD's have a customs seizure warranty and will replace any watch taken by customs. If this happens, do not reply to the letter you receive and contact your TD. The consensus is just wait it out, it will get there eventually.

7. Receipt of Package/Watch

Remember you have bought a rep made in a low wage factory. The finish may have sharp edges and will need the bracelet adjusting. Buy a decent bracelet removal tool and screwdriver to undo the bracelet screws.
Movement. Now, although replica movements have improved vastly in the past few years, you cannot expect it to be running at +/- 2 secs a day accuracy unless it has been Serviced and properly regulated! Running a non serviced replica is fine, but if its running +30secs a day fast or slow when you receive it, then it's actually acceptable. Yes, your Seiko or homage shitter may be more accurate, but it was assembled in much cleaner conditions, correctly oiled, and assembled in a gen watch factory. When setting dates, forward your hour hands first, so the date changes, then move to 6 o'clock. Now change your date. Automatic watches can be hand wound, so google "how to hand wind an automatic watch".
Water Resistance. Assume your watch is not water resistant, and get it tested. It is your choice if you want to ride bareback into the waters. Do check the case back for tightness and the crown is screwed in tightly. Source

Glossary of Common Terms

AD: Authorized Dealer who sells genuine watches.

AP: Audemars Piquet.

AR: Anti-Reflective coating. It is a coating that is placed on watch crystals to deflect glare. Can be single or double sided. Double AR can scratch as one layer is on the outside of the crystal.

B&R: Bell & Ross.

BCE: Short for Breitling Chronomat Evolution.

Beginmariner: An entry level Submariner. Referred to by other names such as Noobmariner and VIPmariner.

Bling: A watch encrusted with diamonds or jewels.

Breit: Short for Breitling.

BST: Buy, Sell & Trade

Builder: A Watchsmith or Watchmaker who builds watches from the ground up.

Bump: The process of bumping a thread back to the top of the new posts section because the poster feels it contains information they want others to see.

C1: A model of Concord watch.

CC: Credit Card.

CG: Crown Guard.

CN: Short for China or Chinese.

CNY: Chinese currency or Chinese New Year.

CONUS: Continental United States (See IN CONUS).

DD: Rolex Day Date

DHL: A shipper often used by the dealers.

DJ: Rolex Datejust

DRSD: Rolex Double Red Sea-Dweller

DW: Datewheel.

EMS: Express Mail Service. They are the usual courier for packages.

ETA: A Swiss movement used in watches. Also available as a China made clone. Gen (Swiss) ETAs are now very rare in reps.

Fakebreaking: A phenomenon wherein rep buyers constantly break certain models of watches. Even if the movements in those watches are commonly used in gens with no issues. This is caused by a failure to understand the limitations of a mechanical timepiece in general. Gen owners are usually not afflicted by this. An example would be the Rolex Daytona. (See Seconds @6).

Fedex: A package delivery service. NEVER USE THEM FOR REPS!

Fiddy: Panerai 127

Fidestro: Panerai 217

FM: Abbreviation for Franck Muller

Franken: A watch that has had genuine parts added to it in order to make it closer to the genuine counterpart.

Gen: Short for genuine watch.

Group Buy: A forum-wide mass buy where items can be purchased at a discounted price.

GBP: British Pound.

HBB: Hublot Big Bang.

HVS: High Value Sale.

Black Magic: An all black Hublot Big Bang.

IMO: In my opinion.

IN CONUS: A designation when something or someone is in the Continental United States. Also a designation in sales ads when someone will only ship within that area (See CONUS).

IWC: International Watch Company.

Lume: The material applied to a watch dial that makes it glow in the dark.

LV: Abbreviation for the Rolex anniversary LV (Lunette Verde) Submariner. Also used to describe Louis Vuitton.

Modded: A watch that has been altered from it’s OEM state.

Mods: Customisations applied to a watch.

Modder: Someone who performs aftermarket modifications to timepieces.

MOP: Short for Mother of Pearl dial.

NWBIG: Stands for ‘Not Worth Buying In Genuine’. A watch with a replica so good there is no point paying the real counterpart.

OEM: Original Equipment Manufacturer.

OP: Original poster.

PAM: Panerai.

PO: Short for Omega Planet Ocean.

POS: Piece of shit.

PP: PayPal. Also an abbreviation for Patek Philippe.

PVD: Physical Vapor Deposition. A particle vacuum coating process used on watches.

QC: Quality Control, Usually refers to the photos sent by a dealer to approve the watch you will be receiving.

Rehaut: The metal ring between the crystal and dial on a watch.

Rep: Short for replica.

RG/Repgeek: A replica forum.

Rollercoasting: When a watch hand has not been installed level. As it spins it moves up and down vertically like a rollercoaster and at some point touches the inside of the crystal jacking everything up.

Rollie: Rolex.

RS or Recommended Seller: Sellers that operate (potentially) outside the TD lists created by watch forums like RWI, RWG etc. These are sellers that have been used by multiple members of the community and are safe to buy from.

ROO: A model made by Audemar Piquet, the Royal Oak Offshore.

RWG.CC: A replica forum.

RWG.BZ: Our sister forum, often referred to as “The wild west of rep fora”

RWI: A forum full of autistic and rude old fucks that think elitism about fake watches is cool.

SEL: Solid End Link. A type of bracelet end link (the bit that joins the bracelet to the watch).

Slevin: Nickname for the IWC Aquatimer.

SMP: Short for Omega Seamaster Professional.

SOH: Breitling Superocen Heritage

SOSF: Short for Superocean Steelfish. It is not SFSO, SSFO, SOF or SF .

SV: Supporting Vendor. A Type of dealer.

Tag: Tag Heuer.

TNT: Another delivery service used by the dealers. Generally for air shipment.

Trustytime ’aka Andrew’: a dealer.

UN: Ulysses Nardin.

UPO: Short for Ultimate Omega Planet Ocean.

UPS: United Parcel Service.

USPS: United States Postal Service

V1/V2/V3/V20????: A term applied to each new version of the previously described ‘Ultimate/1:1/Exact copy’ that was released even though it was already perfect.

VC: Vacheron Constantin

W2B/WTB: Want To Buy aka Where can I find this watch so I can buy it.

W2C: Want To Cop aka Where can I find this watch so I can buy it.

Watch Expert: Someone who has extensive knowledge about timepieces. They are often also a Watchsmith, Watchmaker or Modder (See Builder & Modder).

WU: Western Union. Also ‘Wu’ which is short for the watch dealer WuWatch.

Yachtie: Short for Rolex Yachtmaster.

Buying Replica Watches Common Q&A

Q: I see the watches on DHGate, but they’re missing the logos. Will the watch I get have the logo?

A: Unless otherwise stated in the listing, you bet. The reason that they don’t show the logo in most of the photos is because by not showing them then they have plausible deniability when the authorities come knocking on their door, which happens from time to time. Without the logo, they’re selling “homages”, which is fine. If a logo accidentally falls off the back of a truck and ends up on your faux Patek, then, ya know, oops and shit.

Q: I want to buy something cheap to start with to get used to things. What’s the best watch I can get for $XXX?

A: As stated above, nearly every watch has multiple grades available from different vendors. The Rolex Submariner is probably the most-replicated watch in the world, being that it’s such an iconic status symbol all over the globe. On DHGate you can find them for as little as $12 for a half-plastic quartz shitter, all the way up to $700 clones that are almost completely identical in every way to the original. Not all watches have good cheap versions, but some do. Omega’s Planet Oceans and Seamaster 300s have both inspired rather cheap reps in the $26-32 range that are surprisingly good for the money and make great choices for first-time buyers. (I still wear my $28 Planet Ocean on the regular because it’s a really great watch, period.)

Q: Why r/Chinatime? Why not just merge with r/Reptime?

A: For the most part, Chinatime deals with watches in the $30-$120 area, and anything above that goes to the snobby dudes over in Reptime (JK, fellow rep-bros! Love you too!). Their focus is far more on the complete replications and 1:1 cloning of watches, and some of that shit is fascinating. Expensive, sure, but fascinating.

Since most (but by no means all) ChinaTime reps aren’t in that neighbourhood of sophistication this subreddit was spun off to be its own thing. That said, I’d be surprised if more than ten percent of the people subscribed to ChinaTime aren’t also subscribed to RepTime.

Q: Am I going to go to jail?

A: Not for this, but probably for that other stuff. You need to learn how to delete your browser history.

Q: Shut the fuck up and tell me where I can find a XXX!

A: First off, fuck you. Second off, no, I won’t, but u/SvB78 made this fantastic set of entries that should get you started because he’s a great guy like that. Or girl. It’s the Internet and I don’t want to make any assumptions here.

Q: Did Epstein kill himself?

A: Nope.

Q: How long will my cheap fake watch last?

A: That’s a great question and one that could be a whole post this long on its own. In short, it depends, which I know is not a satisfying answer. There are a couple things to consider, namely “what movement is it?” and “was it put together well?”

If you’re rocking a 2813-based model, it can be a crap shoot. I’ve had three U1 Submariners. My first one broke (my fault) so I ordered a second. It froze after a week. I ordered a third and it’s sturdy like a well-trained horse and should last awhile. These all use the 2813 movement mentioned above.

I also have an Omega Seamaster 300 Spectre clone that I got on the cheap that has a Tongji (or Chinese “unified”) movement, one of the most bare-bones and cheap mechanical movements out there, and it’s not missed a beat in nearly a year. (This watch is a good watch, but a bad, bad rep.)

So, again, there’s no easy answer for your question. Your best bet is to ask your fellow ChinaTimers here.

Q: I can’t seem to find the watch I want. What do?

A: If you have a vendor you like then feel free to message them and ask if they can find it for you. It’s not hyperbole to say that every popular luxury watch on the market right now likely has a rep available, so feel free to ask.

Q: So do I now know everything I need to know to ChinaTime right?

A: You know enough to get started, and thanks for using ChinaTime like a verb. That was cute.

There’s more than can be found from RepTime, though how much of it is applicable to ChinaTime is up for debate.

Q: Will I be a fraud if I walk around with a fake-ass Rolex or Patek on my wrist?

A: Yeah, but you’ll be a dope-looking fraud, so who cares?

As a general tip, keep your luxury within reason. It would make sense for a person with a half-way decent job to afford an Omega Seamaster or a Longines, but if you’re attending community college and sporting an Audemars Piguet Royal Oak Offshore then you’d best believe that you’re going to need a really fantastic explanation for how you got it, which may need to include a whole backstory that involves cocaine, hookers, a crime spree, an unfortunate night at a Thai brothel, cocaine, a stolen pickup, a Canadian gigalo that goes by “Mr. Mountie”, and cocaine.

Q: Can I get a watch from China and sell it to my local pawn shop/on craiglist/to my idiot brother/anyone else?

A: You might be able to pass it off to someone else as the real thing to make money, but that would be a total dick move. We may be breaking international law here in ChinaTime, but we’re not fucking assholes.

Q: WTF is a [insert unknown watch term]?

A: This Q&A isn’t exhaustive, and there is a lot to know in the world of watches. I recommend spending some time in r/watches as well as r/reptime, but if I were you I’d be careful about even speaking about r/chinatime in r/watches, as I got banned for a week for doing that, because those guys are fucking touchy.

Q: I just got my first XXX! It looks great! I’m going to go to r/XXX and show it off!

A: Don’t get cute. If you have even the best Submariner you can get from the ranks of ChinaTime and try to show it off on r/Rolex then you’ll be banned faster than the Astros can cheat at baseball, and you’ll also bring unwanted attention onto our own little cheap-and-shiesty corner of the internet. Don’t do that shit.

Q: Can I buy a used watch from one of you dudes who seem to know what you’re doing?

A: Sure! We offer trades and sales here often, and “I’d like to buy a used XXX” aren’t uncommon, but chances are someone will have something you want that’s maybe even been improved, so feel it out.

Q: Wait, improved? You can make these less-sucky?

A: Absolutely. Do yourself a favor and get a basic watch repair kit from Amazon for like $15. You can use the tools for basic maintenance — such as resizing the bracelet or regulating the balance wheel. You can also use it if your 2813 breaks down and you’d rather replace it than buy a new one. It’s not that hard with the help of youtube.

Q: I tried to regulate it and I broke it! Fuck you!

A: It’s not my fault you’re a butterfingers. Order another $50 watch, you cheap-but-classy bastard.

Guide to Taobao
by u/kolt54321

Taobao is a website similar to eBay, DHgate, or AliExpress – but completely in Chinese. They don’t have too many cheaper built watches, but a plethora of replica clothes and, most importantly, watch parts.

For anyone people who want to buy a submariner rep, Wu and Jason are good (overpriced, but good) choices. But what if you have just a little bit of class, and want to try your hand at building your own watch? How about swapping a dial, or upgrading a 2813/21j movement to something like a Miyota 8215/Seagull ST16? What if r/SeikoMods is your spirit animal, but don’t want to dish out $300 for your watches or $10 for an extra set of hands?

Enter Taobao

I mean, let’s get it straight. The website can be a pain to use. Google Translate only gets you so far before you had enough of “new Baby” and “more Baby”. And there is no shipping option to the US.

So how do you ship to the US?

If you’re new to Taobao… it can be counterintuitive. You need an agent – a separate company who ships your items for you from their warehouse in China, to your address. And I’m really not a good person to ask questions to about this (let’s make believe I have no idea). All I’ll say is take a look – Wegobuy is a trusted agent over at FashionReps, and the guide linked above will get you through how to use them.

So, Cons:

Not intuitive
Not Wu or Jason
WGB’s currency rates aren’t the best. Look on that sub for freight forwarders if you’re brave enough.
Shipping can be expensive – watches aren’t inherently heavy, but to the US, it can be $25 for a single KG (think maybe 3 watches, more in parts if you omit the SS bracelets).

But, as for pros… there are prices here you wouldn’t imagine. Full 2813 or NH35 stainless steel cases for $7, dials and dials for under $3, and swarms of full sets of hands for $1 each. Working 2813’s for $6, NH35’s for $20, ST16’s for $13 or less.

Ever wanted a Wave of Kanagawa or Van Gogh watch build? How about a meteorite or mother of pearl watch face? Try getting that on eBay.

“Yeah, but how do I find this stuff?”

Hey look, a list!

Which Factories Make the Best Models

In an attempt to help our community, many users have helped cultivate this guide. This is only meant as a guide and all decisions about a specific model and subtle differences aren't discussed in detail here. The intent here is to help you if you're looking for a generalized consensus of "Who makes the best submariner?". As factories frequently change and close down, this list will be updated.

On a budget? See the guide of reps $250-$400.

Rolex

Model Family	Model Number	Movement	Best Factory	2nd Best	3rd Best
Submariner	126610LN, 126610LV, 126619LB	3235 Clone	VSF	Clean	ZF
		2836 Asian	GMF	BP
	Gold and two tone	3235 Clone	VSF	Clean	ZF
		2836 Asian	GMF	BP
	124060, 114060 (no date)	3135/3235 Clone	VSF	Clean	ZF
		2836 Asian	GMF	BP
	116610LN, 116610LV, 116619LB	3135 Clone	VSF	Clean	ZF
		2836 Asian	GMF	BP
	16610LN & LV	2824 Asian	TC v6	RAF
	DiW Models (of all sorts)	Clone	DiW Factory
Daytona	All Daytona Models	4130 Clone	Clean	BTF	Noob
	All Gold Daytona Models	4130 Clone	Clean	BTF	Noob
	DiW Daytonas	4130 Clone	DiW Factory/Noob
GMT Master II	Pepsi 126710 BLRO, 116710 BLRO	3285/3186 Clone	Clean	VSF	GMF
	Batman 126710 BLNR, 116710 BLNR	3285/3186 Clone	Clean	VSF	ARF
	116710LN (black)	3186 Clone	Clean	C+ Factory
	Sprite VTNR	3285 Clone	Clean	GF	GMF
	Rootbeer	3285 Clone	Clean	GF	GMF
	126713GRNR (Black/Grey bezel)	3186 clone	APF	EWF	OWF
	DiW Models	3186 Clone	DiW Factory/Noob
GMT Master II (vintage)	16710, 16750, 16700 Pepsi, etc	3186 Clone	BPF
GMT Master	6542 Pepsi	2836 Asian	RBF (might no longer be produced)
Explorer I	36mm 124270, 124723 (two tone)	3230 Clone	GMF
		2836 Asian	GMF	BPF
	40mm 224270	3230 Clone	BPF	JVS
Explorer II	226570 White and Black Dial	3285 Clone	GMF v5
Explorer II	216570 White and Black Dial (date window in wrong position)	3187 Clone	GMF
Air-king	116900 Black Dial	3230 Clone	GMF
		2836 Asian	GMF
	126900 Black dial	3230 Clone	GMF	JVSF
Milgauss	116400 Blue dial	3131 Clone	ARF	DJF	GMF
	116400 Black Dial	2836 Asian	DJF	GMF
	Label Noir Tourbillon	Tourbillon	JBF	BPF
Yachtmaster	226659 42mm White and Yellow Gold	3235 Clone	VSF	Clean
	116622 40mm	3135 Clone	VSF	Clean
	126622 40mm	3235 Clone	VSF	Clean
	116655 40mm	3135 Clone	VSF	Clean
	126655 40mm	3235 Clone	VSF	Clean	EWF
	268622 37mm	3135 Clone	ARF
	226627 Titanium 42mm	3235 Clone	EWF
Datejust 36	All models, best case shape, dial	3235 Clone	Clean
	All models, best movement & crystal	3235 Clone	VSF
		3135 Clone	ARF
		2824/2836 Asian	GMF
Datejust 41	All models, best case shape	3235 Clone	Clean
	All models, best movement & crystal	3235 Clone	VSF
	All models, less pricey	2824/2836 Asian	ZF	GMF
DayDate	40mm models	2836 Asian	GMF	BPF
DayDate	36mm models	2836 Asian	BPF
Skydweller	All Models, low beat (21600bph)	Custom	Noob v2
Datejust 28	All Models	2836 Asian	GMF
Oyster Perpetual	36mm, most dial variants (NB: VSF movement has two crown positions instead of one)	3235 Clone	VSF
	36mm, all other dial variants not by VSF	3230 Clone		GMF	EWF
	41mm models	3230 Clone	GMF	BPF
Seadweller	126600	3235 Clone	VSF
Seadweller	126603 (gold)	3235 Clone	VSF
Cellini	Rose Gold Moonphase	2824 Asian Moon	EWF	KZF	GMF
	Time only All models	2824 Asian	KZF
	Dual Time	Low Beat	KZF

Patek Phillipe

Model Family	Model Number/notes	Movement	Best Factory	2nd Best	3rd Best
Nautilus	5711 All Dial variants
	Small date font, but clone mvmt	324 Clone	3KF
	Best dial and OOTB	9015 Miyota	PPF v5
	DiW Variants	9015 Miyota	DiWF
	Iced Out (aka Diamonds)	9015 Miyota	R8F	DM v2
	5811 Blue	324 Clone	3KF
	5712 Moonphase Date	240 Clone	PPF v2
	5726 Annual Calendar	9015 Miyota	PPF
	5980 Chrono (no good rep though)	7750 Asian	PPF	TWF	BPF
	7010 Ladies 33mm	324 Clone	3KF
	7118 Ladies 35mm	324 Clone	3KF
Aquanaut	5167 40mm	324 Clone	3KF
		9015 Miyota	ZF
	5168 42mm Blue & Green	324 Clone	3KF
		9015 Miyota	ZF
	5165 37mm	9015 Miyota	ZF
	5164 Travel Time (not a good rep)	9015 Miyota	GRF v2
	5067 35mm	Quartz	PPF
	5968 Chronograph	7750 Asian	OMF
Calatrava	5227 (best Calatrava model)	324 Clone	3KF
		9015 Miyota	ZF
	5296 (also best Calatrava model)	9015 Miyota	ZF
	5077 Notre Dame & Bhutan Dial		FLF
	5088		FLF
	5089 Azulejos enamel dial		FLF
	5119		TWF
	5120		TWF
	5123		TWF
	5196 sub seconds		AIF
	5153 (good execution)	9015 Miyota	ZF
	6007	324 Clone	3KF
		9015 Miyota	ZF
	7112		KGF
Grand Complications	4968 Ladies Moonphase		KGF
	5057 Cortina	9015 Miyota	YSF
	5205 Triple Calendar Moonphase	9015 Miyota	GRF v2	KMF
	5396	9015 Miyota	ZF	GRF v2
	5524 Travel Time		GRF v2
	6102 Celestial Map	Custom	TZF

Audemars Piguet

Model Family	Model Number/notes	Movement	Best Factory	2nd Best	3rd Best
Royal Oak	15500 41mm All dial variants	4302 Clone	ZF	APSF
	15510 41mm All dial variants	4302 Clone	APSF
	15510 41mm All dial variants	4302 Clone		ZF
	15400 41mm All dial variants	3120 Clone	ZF	APSF
	15410 41mm textured bracelet	3120 Clone	APSF
	15550 37mm - no good clones yet	9015 Miyota	TWF	IPF
	15450 37mm	3120 Clone	APSF	IPF
	15202 39mm All dial variants	9015 Miyota	ZF	XF (gone)	BF
	16202 39mm All dial variants	9015 Miyota	ZF
	67651 33mm	Quartz	JJF
Royal Oak Offshore	15703 & 15710 42mm All variants	3120 Clone	ZF	APSF
		9015 Miyota	ZF
	15707 42mm Ceramic	3120 Clone	APSF
	15720 42mm All Variants	4302 Clone	ZF	APSF
	67540 37mm	9015 Miyota	Unknown Factory
	26240 44mm Chrono	7750 Asian	APF
Grand Complications	Royal Oak Tourbillon	Tourbillon	R8F
	Open Work Tourbillon	Tourbillon	R8F
	26331 Chronograph	7750 Asian	BPF	OMF
	26579 Perpetual Calendar	9015 Miyota	APSF

Vacheron Constantin

Model Family	Model Number/notes	Movement	Best Factory	2nd Best
Overseas	4500V All dial variants	9015 Miyota	ZF/PPF
	2000V Ultra-Thin	9015 Miyota	XF (gone)
	47040 All dial variants	9015 Miyota	PPF
	7900V GMT	9015 Miyota	PZF
Fifty-Six	4600 Date Only	9015 Miyota	ZF
Fifty-Six	Complete Calendar	9015 Miyota	ZF	MXF
Patrimony	85150 Traditionelle	9015 Miyota	PPF
Patrimony	4010 Perpetual Calendar	9015 Miyota	MXF
Other References	Chronometre Royal 1907		MKS
Other References	Historique 86300		GSF

Richard Mille

Model Family	Model Number/notes	Movement	Best Factory	2nd Best	3rd Best
	RM011		KVF - thick but best decorated
	RM035		BBR factory	Sonic	ZF
	RM055		BBR factory	ZF
	RM027-01		YSF	EURF
	RM027-02		RMF
	RM027-03		RMF
	RM056		EURF
	RM052 Skull		3KF	JBF
	RM012		KVF
	RM68		RRF
	RM010		RRF
	RM07		RMF

Omega

Model Family	Model Number/notes	Movement	Best Factory	2nd Best	3rd Best
Seamaster	All models	Clone	VSF
		2824 Asian	ORF	OMF
	300 black ceramic	2824 Asian	OMF
	Aqua Terra	Clone	VSF
		2824 Asian	OMF
	Aqua Terra GMT	Clone	VSF
	No Time to Die 007	2824 Asian	VSF	OMF
	Diver 300M	Clone	VSF
		2824 Asian	ZF	OMF
	Ultra Deep 6000M	Clone	VSF
Planet Ocean	39mm, 42mm, 45mm	Clone	VSF
Speedmaster	Racing	7750 Asian	HRF
	Speedmaster 57 (not great)	7750 Asian	OMF
	Snoopy	Asian Lemania	OMF	RMF	OSF
Deville	33mm		UVS F
	33mm Dew Drop		3S F
	36mm		HRF
	Prestige 39mm	2824 Asian	ZF
Constellation	41mm	Clone	VSF

Cartier

Model Family	Model Number/notes	Movement	Best Factory	2nd Best	3rd Best
Tank	Louis	Quartz	DRF
	Solo Small	Quartz	AF	K11F
	Solo Large	9015 Miyota	AF	F1F	TWF
	Must		AF	F1F	K11F
	Francaise		8848F
Santos	35mm steel		GF/GOF	BVF	3KF
	35mm Two-tone/gold		BVF	3KF
	40mm Steel		GF/GOF	BVF	3KF
	40mm Two-tone/gold		BVF	3KF
Ballon Bleu	33mm & 36mm	Quartz	AF	3KF	V6F
	36mm	9015 Miyota	AF	V6F
	41mm	9015 Miyota/2824	AF	3KF	V6F
Panthere	Secrete De	Quartz	GF/GOF	BVF
Pasha	30mm	Quartz	AF
Pasha	35mm	9019 Miyota	3KF

Tudor

Model Family	Model Number/notes	Movement	Best Factory	2nd Best
Pelagos	Titanium Black	2824 Asian	XF	ZF
	Titanium Blue	2824 Asian	XF	ZF
	Left Hand Diver (LHD)	2824 Asian	XF
Black Bay	Heritage 36	2824 Asian	KRF v3
	Pepsi GMT	2836 Asian GMT	ZF
	Two Tone GMT	2836 Asian GMT	ZF
	Heritage GMT	2836 Asian GMT	ZF
	Heritage Chronograph	7750 Asian	unknown (TWF?)
	41mm Diver	2824 Asian	ZF
	Heritage Diver 58	9015 Miyota	ZF	XF
Royal	Day Date	2836 Asian	V7F

Jaeger-LeCoultre

Model Family	Model Number/notes	Movement	Best Factory	2nd Best
Master Ultra Thin	Moonphase (5 stars on moonphase)	925 Clone	ZF v2	IMF (Miyota 9015)
	Moonphase (Lots of stars on moon)	925 Clone	APSF	IMF (Miyota 9015)
	Date (at 6 o clock)	9015 Miyota	IMF
	Small Seconds	9015 Miyota	ZF
	Power Reserve	Clone	ZF
	Perpetual Calendar	9015 Miyota	TWF
	Tourbillon	Tourbillon	RMSF
Reverso	Tribute Duoface Small Seconds		MGF
Polaris		9015 Miyota	BLS
Rendezvous			ZF	APSF

Panerai

Model Family	Model Number/notes	Movement	Best Factory	2nd Best	3rd Best
Luminor	PAM 000 - Luminor Base Logo (44mm) N-series Noob V2.5	Seagul ST3600 (ETA 6497 clone) 21,600 vph	Noob (Closed)
	PAM 005 - Luminar Marina Logo (44mm) N-series Noob V2 / N-series H maker V2	Seagul ST3600 (ETA 6497 clone) 21,600 vph	Noob (Closed)
	PAM 026 - Luminor Marina Destro PVD (44mm) K-series Noob V3	Seagul ST3600 (ETA 6497 clone) 21,600 vph	Noob (Closed)
	PAM 029 - Luminor GMT (44mm) M-series Noob V2-improved		Noob (Closed)
	PAM 057 - Luminor Power Reserve Titanium (44mm) DSN
	PAM 088 - Luminor GMT (44mm) O-series Noob		Noob (Closed)
	PAM 104 - Luminor Marina Automatic (44mm) O-series Noob		Noob (Closed)
	PAM 111 - Luminor Marina (44mm) N-series Noob V3 (and later -> current best : v11)	Seagul ST3600 (ETA 6497 clone) depending on factory options can be 21,600 or 18,000 vph	Noob (Closed)	XF	HWF
	PAM 112 - Luminor Base (44mm) M-N series Noob	Seagul ST3600 (ETA 6497 clone) 21,600 vph	Noob (Closed)
	PAM 127 - Luminor 1950 "Fiddy" (47mm) Latest Noob		Noob (Closed)
	PAM 164 - Luminor Marina Automatic (44mm) O-series Noob		Noob (Closed)
	PAM 176 - Luminor Base Titanium (44mm) M-N series Noob V3	Seagul ST3600 (ETA 6497 clone) 21,600 vph	Noob (Closed)
	PAM 177 - Luminor Marina Titanium (44mm) N-P series Noob	Seagul ST3600 (ETA 6497 clone) 21,600 vph	Noob (Closed)
	PAM 187 - Luminor Submersible Chorno 1000m (47mm) Noob 7753		Noob (Closed)
	PAM 217 - Luminor Marina Militare 1950 Destro "Fiddy" (47mm) 2012 Noob	Seagul ST3600 (ETA 6497 clone) 21,600 vph	Noob (Closed)
	PAM 243 - Luminor 1950 Submersible (44mm) M-series Noob V2		Noob (Closed)
	PAM 297 - Luminor GMT (44mm) O-series Noob		Noob (Closed)
	PAM 299 - Luminor Marina Automatic (K-series) (44mm) O- series Noob		Noob (Closed)
	PAM 318 - Luminor Marina Logo (44mm) L-series Noob	Seagul ST3600 (ETA 6497 clone) 21,600 vph	Noob (Closed)
	PAM 356 - Luminor Chrono Daylight (44mm) O-series Noob 7753		Noob (Closed)
	PAM 364 - Luminor Submersible 1950 Titanium (47mm) P-series Noob		Noob (Closed)
	PAM 390 - Luminor Boutique Edition (44mm) N-series Noob	Seagul ST3600 (ETA 6497 clone) 21,600 vph	Noob (Closed)
	PAM 411 to 420 - Luminor Marina Boutiques Special Edition (44mm) KW/V6F	Seagul ST3600 (ETA 6497 clone) 21,600 vph	V6F/VSF
	PAM 432 to 434 - Luminor Marina Boutiques Special Edition (44mm) H Maker
	PAM 441 - Luminor GMT VSF V2		VSF
	PAM 508 - Luminor 1950 Submerislbe Ceramica (47mm) KW-V6Fac Ceramic decorated A7750 Inverted KP9000 // P-KW-V6Fac Ceramic decorated Seagull NON-inverted KP9000-Seagull V2		V6F/VSF
	PAM 569 - Luminor 1950 Submersible Dextro Titanium (47mm) KW-V6F Q-series Seagull Non-Inverted KWP9000-Seagull V2		V6F/VSF
Radiomir	PAM 288 - Radiomir Chronograph (45mm) K-series H maker
	PAM 292 - Radiomir Black Seal (45mm) J-series Noob		Noob (Closed)
	PAM 346 - Radiomir Titanio (45mm) KW/V6F		V6F/VSF
Submersible	PAM 187 - Luminor Submersible Chorno 1000m (47mm) Noob 7753		Noob (Closed)
	PAM 243 - Luminor 1950 Submersible (44mm) M-series Noob V2		Noob (Closed)
	PAM 364 - Luminor Submersible 1950 Titanium (47mm) P-series Noob		Noob (Closed)
	PAM 569 - Luminor 1950 Submersible Dextro Titanium (47mm) KW-V6F Q-series Seagull Non-Inverted KWP9000-Seagull V2		V6F/VSF

Breitling

Model Family	Model Number/notes	Movement	Best Factory	2nd Best
Avenger	Breitling Avenger II GMT GF/GOF (first batch with correct DW, includes the polished SS and the blacksteel / DLC) infos here		GF/GOF
SuperOcean	Breitling SuperOcean Abyss
	Breitling SuperOcean Abyss Chrono Noob
	Breitling SuperOcean Heritage Black Noob V2 (not available on TD anymore)		GF/GOF	OF
	Breitling SuperOcean II 44mm (Noob) (black only)		Noob (Closed)
Navitimer	Breitling Navitimer 1 41mm - V7F (blue is best, then black/white)		V7F/VSF
Transocean	Breitling Transocean Day Date Blue - V7F		V7F/VSF
Chronomat
Premier

IWC Schaffhausen

Model Family	Model Number/notes	Movement	Best Factory	2nd Best	3rd Best
Big Pilot's / Pilot's	IWC Big Pilot 5009-01		ZF
	IWC 3878 Spitfire		V6F/VSF
	Most pilot dial variants 40mm	Miyota 9015	ZF
		Asian 2892	M+F
	IWC 3777-01	Asian 7750	ZF
	Big Pilot Tourbillon	Tourbillon	JBF
	40mm Pilot Bronze	Miyota 9015	MKS
	Pilot Chrono	Asian 7750	ZF	V6SF
Da Vinci	IWC Da Vinci		TW
Portofino	IWC Portofino		AF	V7F
Portofino	IWC Portofino "150 years anniversary"		V7F
Portugieser	Chrono, all dial variants	Modified 7750	ZF	AZF	YLF
	Chrono Yacht with date, all variants	Asian 7750	ZF	APF
	Small Seconds	Custom	ZF
	Tourbillon	Tourbillon	TC F
	Perpetual Calendar	Custom 9015	APSF
	Annual Calendar	Custom	ZF	AZF	YLF
	7 Days	Custom	ZF
Aquatimer	Chrono	Asian 7750	V6SF
	IW3290 Date only	Asian 2892	V6SF
	Automatic	Asian 2892	V6SF
Ingenieur	Vintage model	Miyota 9015	AIF
Ingenieur	Carbon	Miyota 9015	CF

Source

The 'Not Worth Buying In Gen' (NWBIG) Guide

If you decide to buy one of these watches because it is in this list, please always take the time to understand WHY it's in the list, check reviews, make sure you understand what you're buying.

Note that if there are several super reps of the same model and unless both are awesome quality, only the best one will be listed here.

Some watches are discontinued (can only be found in p2p).

Commonly accepted as Super Reps NWBIGs

Brand	Model	Factory	Version
Audemars Piguet	ROO Diver JF 10 15703	JF
Blancpain	Fifty Fathoms (black)	Noob	V1
	Fifty Fathoms (black)	ZF
Breitling	Avenger II GMT GF	GF
	SuperOcean Abyss
	SuperOcean Abyss Chrono Noob	Noob
	SuperOcean Heritage Black Noob V2	Noob
	SuperOcean II 44mm (black only)	Noob
	Transocean Day Date Blue - V7F	V7F
	Navitimer 1 41mm - V7F	V7F
Bvlgari	Diagono Magnesium GF, last version	GF
Cartier	Santos XL V6	V6
	Ballon Bleu 42mm, V6F V4	V6	V4
	Ballon Bleu Pink Dial 33m, AF (CAL.076)	AF
	Tank Solo W5200025 RG AF	AF
Franck Muller	Casablanca Automatique 8880	GF
Hublot	Big Bang V6(F) "V6.5" SS	V6
IWC	3777-01 ZF
	3878 Spitfire V6F	V6
	Big Pilot 5009-01 ZF	ZF
	Laureus Sport Ingenieur 2824 Noob	Noob
	Da Vinci by TW	TW
	Portofino AF	AF
	Portofino "150 years anniversary" blue dial (maybe others too)	V7F
Jaeger-LeCoultre	Diver Master Compressor Noob	Noob
Montblanc	Timewalker Chrono - Noob A7753	Noob
Panerai	PAM 000 - Luminor Base Logo (44mm) N-series Noob V2.5	Noob	V2.5
	PAM 005 - Luminar Marina Logo (44mm) N-series Noob V2 / N-series H maker V2	Noob	V2 / V2
	PAM 026 - Luminor Marina Destro PVD (44mm) K-series Noob V3	Noob	V3
	PAM 029 - Luminor GMT (44mm) M-series Noob V2-improved	Noob	V2-improved
	PAM 057 - Luminor Power Reserve Titanium (44mm) DSN	DSN
	PAM 087 - H maker F-series w/ A-7750	H maker	F-series w/ A-7750
	PAM 088 - Luminor GMT (44mm) O-series Noob	Noob	O-series
	PAM 104 - Luminor Marina Automatic (44mm) O-series Noob	Noob	O-series
	PAM 111 - Luminor Marina (44mm) N-series Noob V3 (and later -> current best : v11)	Noob	V3 / v11
	PAM 112 - Luminor Base (44mm) M-N series Noob	Noob	M-N series
	PAM 127 - Luminor 1950 "Fiddy" (47mm) Latest Noob	Noob	Latest
	PAM 164 - Luminor Marina Automatic (44mm) O-series Noob	Noob	O-series
	PAM 176 - Luminor Base Titanium (44mm) M-N series Noob V3	Noob	M-N series V3
	PAM 177 - Luminor Marina Titanium (44mm) N-P series Noob	Noob	N-P series
	PAM 187 - Luminor Submersible Chorno 1000m (47mm) Noob 7753	Noob	7753
	PAM 217 - Luminor Marina Militare 1950 Destro "Fiddy" (47mm) 2012 Noob	Noob	2012
	PAM 243 - Luminor 1950 Submersible (44mm) M-series Noob V2	Noob	V2
	PAM 285 - K-series KW/V6Fac with A7750 decorated like OPIII)	KW/V6Fac	A7750 decorated
	PAM 288 - Radiomir Chronograph (45mm) K-series H maker	H maker	K-series
	PAM 292 - Radiomir Black Seal (45mm) J-series Noob	Noob	J-series
	PAM 297 - Luminor GMT (44mm) O-series Noob	Noob	O-series
	PAM 299 - Luminor Marina Automatic (K-series) (44mm) O-series Noob	Noob	O-series
	PAM 318 - Luminor Marina Logo (44mm) L-series Noob	Noob	L-series
	PAM 346 - Radiomir Titanio (45mm) KW/V6F	KW/V6F
	PAM 356 - Luminor Chrono Daylight (44mm) O-series Noob 7753	Noob	O-series 7753
	PAM 364 - Luminor Submersible 1950 Titanium (47mm) P-series Noob	Noob	P-series
	PAM 390 - Luminor Boutique Edition (44mm) N-series Noob	Noob	N-series
	PAM 411 to 420 - Luminor Marina Boutiques Special Edition (44mm) KW/V6F	KW/V6F	Special Edition
	PAM 432 to 434 - Luminor Marina Boutiques Special Edition (44mm) H Maker	H Maker	Special Edition
	PAM 441 - Luminor GMT VSF V2	VSF	V2
	PAM 508 - Luminor 1950 Submerislbe Ceramica (47mm) KW-V6Fac Ceramic decorated A7750 Inverted KP9000 // P-KW-V6Fac Ceramic decorated Seagull NON-inverted KP9000-Seagull V2	KW-V6Fac / P-KW-V6Fac	A7750 / Seagull V2
	PAM 569 - Luminor 1950 Submersible Dextro Titanium (47mm) KW-V6F Q-series Seagull Non-Inverted KWP9000-Seagull V2	KW-V6F	Seagull V2
	PAM 571 - ZFac P-series P.9000 decorated A7750 NON-inverted Improved ZP9000-V2.5 // KW-V6Fac P-series P.9000 decorated A7750 Inverted KP9000-V2. KW-V6Fac P-series P.9000 decorated Seagull NON-inverted K9000-SeagullV2.	ZFac / KW-V6Fac / K9000-SeagullV2	P.9000 decorated A7750 / P.9000 decorated Seagull
	PAM 607 - KW-V6Fac P-series Ceramic decorated A7750 NON-inverted KP9000-V2) The most interesting version for A7750 lovers. // KW-V6Fac P-series Ceramic decorated KP9000-Seagull V2 NON-inverted The most interesting version for Seagull lovers	KW-V6Fac	A7750 / Seagull V2
Rolex	114300, 39mm, Grape and Grey dial JF (now ARF, service is recommended)	JF / ARF
	Sub 16610 TC	TC
	TW Best/WM9 (Sub/Bluesy/DD)	TW Best / WM9	Sub / Bluesy / DD
	116900 AIR-KING GMF & BP (last versions)	GMF & BP	Last versions
Seven Friday	P series (P1-1, P3-1)	V6F
	V series (V2-1)	V6F
	M series (not the M2-2 one)	V6F
Tag Heuer	Aquaracer 300 (White Dial on Ronda with SS bracelet)
	Aquaracer Calibre 5 SS on Rubber - SW200
Tudor	Black Bay Red 2016 ZF (last shield version)	ZF	Last shield version
	Heritage Ranger SS S Factory	S Factory
	Black Pelagos V6F/XF V2/3/4	V6F/XF	V2/3/4
	Blue Pelagos V6F/XF V2/3/4	V6F/XF	V2/3/4

Commonly accepted as First Class++ NWBIGs
These are Super Reps on the wrist, minor tell only on the open caseback or a missing function so unless you take it off, show it to an expert and give him a few minutes for close inspection, these ARE CONSIDERED SUPER REPS

Brand	Model	Factory	Version
Panerai	PAM 438 - VSF V2	VSF	V2
	PAM 687 - Acciaio Brevettato SF	SF
Longines	Master Collection LGF Top Edition	LGF	Top Edition
Omega	Seamaster Planet Ocean 600m LMPO Noob V5	Noob	V5
	Seamaster Diver 300M 2019 Real Ceramic Case VSF (v1 only unless you get a fixed version)	VSF	v1 / fixed version
Patek Philippe	Calatrava 5296R RG/LE ZF with MY9015 Mod (WG could be too, need feedback)	ZF / WG	MY9015 Mod / WG?
	Calatrava 5296G SS ZF White Sector Dial/Blue Hands	ZF	White Sector Dial

Under debate / No Consensus yet
Likely Super Reps but needs more feedback, definitely FIRST CLASS NWBIGs

Brand	Model	Factory	Version
Cartier	Ballon Bleu 28 and 33mm	V6F
	Santos 100 V6F (Black Dial, Titanium Ultimate Swiss SW)	V6F	Black Dial, Titanium Ultimate Swiss SW
	Ronde Croisiere WSRN0002 GP	GP
	W5200025 ZF	ZF
Chanel	J12 38 mm - FR Factory	FR Factory
IWC	501902 Top Gun Miramar ZF	ZF
	IW388002 V6F	V6F
	IW327010 MARK XVIII by V7 Factory	V7 Factory
	Big Pilot IW502001 Real Ceramic ZF V2 (waiting for new batch, short minute hand issue)	ZF	V2 (waiting for new batch)
Longines	La Grande Classique SS 37mm JF	JF
	Avigation Bigeye ZX	ZX
Omega	Aqua Terra 8500 Clone - VSF	VSF
	AT Master Co-Axial 8900 - VSF	VSF
	De Ville SS RXW A2892	RXW A2892
	De Ville SS GPF V2	GPF V2
Tudor	Heritage Ranger V6F	V6F
TAG Heuer	Aquaracer Special Edition Premier League GS
Zenith	Pilot Extra Special 20 - Black dial (V6F > ZF)	V6F / ZF	Black dial (V6F > ZF)

FIRST CLASS NWBIGs

Brand	Model	Factory	Version
Audemars Piguet	15703 ZF	ZF
	15500 Black and Blue - ZF & APS	ZF / APS	Black and Blue
Bell & Ross	03-92 ZF (not the Golden Heritage one that has a very bad Dial)	ZF	Not the Golden Heritage
	03-92 Horolum Watch Archive Custom
	03-93 GMT Watch Archive Custom
Blancpain	Fifty Fathoms (Noob V2)	Noob V2
Breitling	Navitimer World 46mm GMT (black only) BP	BP
	Avenger Blackbird (GF/ GF V2 - GOF/GOF V2)	GF / GF V2 (GOF/GOF V2)
Cartier	W6701011 ZF (really subtle difference on DW and window)	ZF	Really subtle difference
Franck Muller	Master Square GF	GF
Hublot	Classic Fusion 42mm JJF black dial (V2) - Back is wrong and screws are randomly falling	JJF	V2
IWC	Portofino White Dial V5 MKF	MKF
	Portofino "150 years anniversary" white dial MKF	MKF
	Mark XVII Le Petit Prince MKF	MKF	Le Petit Prince
	Mark XVII MKF	MKF
	Portuguese 7 days ZF (last version)	ZF	Last version
	Black 3714 - ZF V3 (slim movement)	ZF V3	Slim movement
Jaeger-LeCoultre	Master-Ultrathin Moonphase ZF (black dial, possibly the others too, moon & back / clasp are little off)	ZF	Black dial, moon & back issues
Montblanc	Heritage Spirit M Factory	M Factory
Omega	Seamaster 300 Spectre VSF	VSF
	Seamaster Diver 300M 2018 VSF V2	VSF V2
	Seamaster Planet Ocean 600m 42 and 45mm (CrPO) Noob	Noob	42mm and 45mm
	Seamaster Planet Ocean (45.5 / 42mm) CrPO (8500 Super Clone) VSF	VSF	45.5mm / 42mm
Panerai	PAM 382 - VSF V2 (small issue with the font on the crown guard)	VSF V2	Small font issue
Patek Philippe	Calatrava 6007A ZF	ZF
Rolex	DateJust 41 by VSF / ARF	VSF / ARF
	Explorer (214270) SH3135 V2 (JF)	JF
	Day Date 18239 TW Best/WM9	TW Best / WM9
	Daytona 116500 (Asia 4130 Mod) White/Stk - Noob	Noob	White/Stk
	Daytona 116520 (Asia 4130 Mod) - Noob	Noob
	Submariner 116610LN ZZF v2	ZZF v2
	Submariner No Date ZZF v3	ZZF v3
	Submariner 116610 Date VSF (GET THIS ONE, might even be Super Rep once Rehaut is fixed)	VSF	Rehaut issue
	Sea Dweller 4000 (116660) ARF 904L Steel SH3135	ARF	904L Steel SH3135
	Sea Dweller 4000 (116600) Noob V2	Noob V2
	Sea Dweller 2017 Baselworld 126600 904L ARF & Noob (latest versions)	ARF / Noob
	Yacht-Master Rhodium Noob 904L Steel SA3135/VR3135	Noob	Rhodium
Tag Heuer	Carrera calibre 1887 V6F - Ceramic Bezel Black Dial on SS	V6F	Ceramic Bezel
Tudor	LHD Pelagos - XF	XF	LHD Pelagos
	Black Pelagos - ZF V2/V3	ZF V2 / V3

Under review (likely to be FIRST CLASS, some could be Super Reps but need more feedback)

Brand	Model	Factory	Version
Audemars Piguet	XF V2 FC Diver 15706	XF	V2 FC Diver
Breitling	SuperOcean SeaWolf H-factory v2	H-factory	V2
	Superocean Heritage II 42mm - GF/GOF V2 (wrong pearl, font too bold, date font)	GF/GOF	V2
Concord	C1 - H Factory	H Factory
Cartier	Panthère Secrete DJ
	Tank Solo W5200025 RG AF 1:1	RG AF	1:1
IWC	Big Pilot 5009-12 ZF	ZF
	Big Pilot 5009-16 ZF	ZF
	5009-08 LPP ZF V2	ZF V2
Omega	Seamaster Planet Ocean GMT 600m
	De Ville SS MKS	MKS
	Planet Ocean 600m GMT (Black/Orange) VSF 8605	VSF 8605
Panerai	PAM 616 - CarboTech Submersible VSF A7750	VSF	A7750
	PAM 424 V2 California Dial Super Clone P.3000 ZF	ZF	V2
Rolex	Sea Dweller Deepsea (DBlue) Noob V7	Noob V7	DBlue
	Date-Just 116234 ARF	ARF
	Explorer II 42mm 216570 Noob (Correct Hand Stack)	Noob	Correct Hand Stack
SevenFriday	P2B/03-W ‘Woody’ NFC V6F	V6F
Tudor	Heritage Black Bay Bronze Blue XF	XF
	Blue Heritage Black Bay (Bucherer) XF	XF
Vacheron Constantin	Overseas White JJF MY9015 Mod (need feedback on movement noise and cross engraving thickness on the back)	JJF	MY9015 Mod, feedback needed
Zenith	Extra Special Bronze Edition V6F/KW	V6F/KW

NOT ACCEPTED as NWBIGs/Super Reps (naked eye instant tell(s)/waiting for update)

Brand	Model	Factory	Version
Tudor	BB Red Rose Edition ZF	ZF	V4/V5
Blancpain	Villeret 6654 SS (with complication) OMF	OMF	With complication
Glashutte	Senator Sixties - GF	GF
Rolex	Celini MKF	MKF
Tudor	Black Bay GMT Baselworld 2018 ZF	ZF
Patek Philippe	Nautilus 5711 PPF White	PPF	White

Source

What to look for in a Replica Watch Quality Check (QC)

You've made an order and the dealer has sent you an album of your watch and asked if you accept.

This guide covers what you should pay attention to when RL (Red Lighting/Rejection) or GL (Green Light/Approving) a watch.

Index alignment

Refers to the alignment of the hour markers or numerals on the watch dial. The index alignment is essential for the overall aesthetics and functionality of the watch.

You can check the index alignment of your watch during the PSP by having your seller send you a clear, straight on shot of the face of the watch. You'll then take that image and upload it to this site: https://watchqc.com There you can use the tools to look at the alignment and make sure it doesnt have a lazy eye.

Now, don't get your fing panties in a bunch if you find shit is misaligned. First make sure you're using the tool correctly. You also want to ensure that your PSP isn't taken at any kind of weird angle. This is one of the many reasons why the TD list is so crucial, they are accustomed to providing the right photos, and so all you have to do is stick it in that link.

Index alignment for a Rolex Lady's Datejust 31 with diamond markers, the watchQC tool should hit THE SAME POINT on the watch in the middle of the diamond. You will see in the photo's I provided in accuracy below. Note that there is a difference between consistency and accuracy:

Accuracy: Accuracy refers to how close a measured value or information is to the true or correct value. Accuracy would be each spoke on the assessment tool hitting the middle of the diamond.
Consistency: Consistency refers to the degree of uniformity, stability, or repeatability of results or measurements when performed under the same conditions. In this case, each spoke of the assessment tool touching the same points on the watch.

You'll see in the photos of my rep, that it is consistent, but not accurate. That's cus im fucking lazy and can't hold the watch straight. You want to make note of the CONSISTENCY when using the tool if you have a photo like mine, not the accuracy. Ideally both however.

Dial Printing

Refers to the various markings, text, numerals, and decorative elements to the watch dial. The dial is the flat or slightly curved surface of the watch face where the time is displayed. Common elements you may find on a watch dial:

Hour Markers/Minute Markers/Brand Name/Logo
Luminous Material: make the watch readable in low-light conditions. (something that shit watches can fuck up if the chemical isn't applied properly, so your watch might look like shit even in the dark)
Subdials: In watches with additional complications like chronographs (stopwatch function) or other features, small subdials may be included on the main dial.
Tachymeter/Telemeter/Other Scales: Some watches have specialized scales printed on the outer edge or inner bezel of the dial for specific purposes, such as measuring speed (tachymeter) or distance (telemeter).

Dial Printing for a Rolex Lady's Datejust 31with diamond markers. This is somewhat straight forward and also really annoying and complex. Simply put just compare a close up of your Rep with the Authentic online, ideally a photo of the authentic from a watch forum. You'll want to look at the following:

Diamond Hour Markers: The dial will feature diamond hour markers at each hour position
Date Window: Datejust models include a date window at the 3 o'clock position, allowing you to see the current date. More on this in the Date Wheel alignment section.
Rolex Crown Logo: The Rolex crown logo is present in place of the 12 o'clock position.
"ROLEX" Brand Name: The brand name "ROLEX" is printed below the 12 o'clock position, and below that "oyster perpetual datejust"
Above the 6 o'clock position will be "superlative chronometer officially certified"
Below the 6 o'clock position will be "Swiss made" with a Rolex image between the words
Model/Collection Name: Most Rollies will have an engraving that is seen on the rim underneath the crystal face. It will say ROLEXROLEXROLEXROLEX until the 6 o'clock position and then it will be the serial number. you can see what I'm talking about HERE
Finally any Rolex made after 2002 will have a very very faint etching on the crystal. It is a small crown emblem etched at the 6 o'clock position on the inside surface of the crystal. It's really hard to see and I saw it first on my rep before I could find it on my auth. Note that an auth isn't going to be all flashy about it, its def super hard to find, the rep on the other hand, may or may not have it but if it does the fainter, more difficult to spot the better. read more about it HERE

This gets complicated because I cannot find the EXACT measurements of the above anywhere, so if you want to get freakishly technical about it- call your psychiatrist. Other than that just compare the two faces of the watch side by side as images. Try and look for the size and spacing of the letters, if it's printed cleanly, if it's spelled "Bolex".

Fun fact, "kerning" is a typographic term used in graphic design and typesetting to refer to the adjustment of the space between individual characters or letters in a piece of text. It is specifically focused on adjusting the space between two adjacent characters to achieve better visual harmony and improve the overall appearance of the text.

~cHeCk YoR kErrnnINGg~

Date Wheel alignment/printing

Also known as Date Disc alignment or Date Printing, this is a rotating disc inside the watch movement that displays the current date through a small window (date window) on the watch dial. Date Wheel alignment or printing refers to the proper positioning and centering of the numerical or numeral indicators on the Date Wheel to ensure that the date is correctly displayed in the date window. Watch manufacturers use different techniques and technologies to achieve accurate Date Wheel alignment during the manufacturing process.

Misaligned Date Wheels can lead to various issues, such as:

Partially hidden date: If the Date Wheel is misaligned, the date numerals may not fully appear through the date window, making it difficult to read the complete date.
Overlapping or misshapen numerals: Improper alignment can cause date numerals to overlap or appear distorted, affecting readability.
Incorrect date display: In some cases, a misaligned Date Wheel may cause the date to jump or change slightly before or after midnight, leading to an inaccurate display.

Date Wheel alignment/printing for a Rolex Lady's Datejust 31: In the case of Rolex's the cyclops lens is the specific name for it's date window (small, circular piece of magnifying material, typically made of sapphire crystal, which is placed directly above the date aperture at the 3 o'clock position on the watch dial.) The primary function of the cyclops is to enhance date legibility, so you know if you're late and carrying your idiot boyfriends child. It enlarges the date numeral by around 2.5 times, making it more prominent and clearer for the wearer. This is usually what is a dead give away, as it's hard to reproduce. Further information HERE

Also pretty straight forward and annoyingly technical. Off the bat I can tell that the number within the date wheel sits a little too low, it's also slightly less visible and thus smaller than my Auth. This is due to the typeface being slightly smaller and something is a little off with the cyclops lens. To assess this detail on your watch, you're going to need someone who is trained to QC the watch to look at it or look at examples.

It is difficult because in photographs it's hard to determine if it's the right size. There are things that someone can tell you to look for, but fuck if I know the lettering has been 2.5X.

However in person and especially next to an authentic- mine is obviously more difficult to read.

Hand Alignment

Refers to the correct positioning and alignment of the watch hands (hour, minute, and second hands) on the watch dial.

Hour Hand Alignment: The hour hand should be precisely aligned with the hour markers on the dial. It should point directly at the respective hour markers without any misalignment or deviation. If the hour hand is misaligned, it can lead to difficulties in reading the time accurately.
Minute Hand Alignment: The minute hand should be aligned with the minute markers on the dial. It should point directly at the minute markers and move smoothly without any catching or rubbing against other elements on the watch dial.
Second Hand Alignment: The second hand, if present in the watch, should move smoothly and align accurately with the second markers or indices on the dial. It should sweep around the dial in a manner that resembles the "movement" of your watch.
Centering: Hand alignment also involves ensuring that all three hands are properly centered on their respective axes or pivots. They should be balanced and evenly spaced around the central axis of the watch.

Hand Alignment for a Rolex Lady's Datejust 31: Basically the same as any watch and whats written above. You are looking to see if your shit ticks right. With the diamond index's this becomes a little irrelevant since there aren't any markers to check the alignment, but you can still assess the hands to make sure nothing is wonky.

Bezel

A bezel is a functional and decorative component that surrounds the watch crystal (glass face) and holds it securely in place. The bezel is typically located on the top of the watch case, surrounding the face. Bezels can be made from various materials, such as stainless steel, gold, ceramic, precious stones. Depending on the watch type, there are different types of bezels, each serving unique purposes:

Protective Bezel: Many watches have a protective bezel that covers and secures the watch crystal. This bezel prevents the crystal from being scratched or damaged due to everyday wear and tear.
Rotating Bezel: Some sports and diving watches feature a rotating bezel, usually with minute markings or a dive scale. This bezel can be rotated unidirectionally to measure elapsed time or to keep track of remaining time during an activity.
Tachymeter Bezel: Certain chronograph watches have a tachymeter bezel. This bezel is marked with a scale that allows the wearer to measure speed based on the time it takes to travel a known distance.
Countdown Bezel: Some watches designed for specific sports or activities have a countdown bezel. It allows the wearer to set a specific time duration and count down to zero.
GMT Bezel: Watches with GMT (Greenwich Mean Time) or multiple time zone functions might have a bezel with 24-hour markings. This bezel assists in tracking the time in different time zones.
✨Decorative Bezel✨: In luxury and fashion watches, the bezel may serve a purely decorative purpose. It can be adorned with precious stones, diamonds, or intricate designs to enhance the watch's aesthetics.

Bezel for a Rolex Lady's Datejust 31: A bezel for the Datejust can be either fluted or smooth. I personally think the smooth bezel is the ugliest thing I've ever seen, but who I am to inform you that you're making a terrible choice. There's also the iced out bezel- I'm indifferent.

However, worth noting- the fluted bezel only comes in solid gold. The smooth bezel has various options for the metal type. Even if you get an authentic steel Datejust 31 the fluted bezel will be in white gold.

I haven't been able to find much information on determining the quality of your bezel. you might have a bad bezel. I asked r/RepTime about bad bezels, no one has responded... Let me know if y'all have any more information on assessing bezels in general.

Solid End Links (SELs)

Refer to the solid metal links that connect the watch case to the watch bracelet or strap. They are a feature commonly found in high-quality and luxury watches. The end links are located at the lugs of the watch case, which are the protruding extensions on both sides of the case where the bracelet or strap attaches.

In watches with solid end links, the metal links are precisely fitted to the specific shape and curvature of the watch case lugs. This results in a seamless and precise connection between the case and the bracelet, providing a comfortable and secure fit on the wrist. Solid is referring to the fit of the first link being tightly secured without gaps or movement- not *solid*- like good- the way I initially interpreted it...

Solid End Links (SELs) for a Rolex Lady's Datejust 31: Honestly go to the accuracy assessment portion down below it will be a lot easier to see what I'm trying to explain than writing it out.

Timegrapher numbers

Also known as Timegrapher readings or measurements, are specific values obtained from a timegrapher, which is a specialized watch testing instrument used by watchmakers and technicians to assess the accuracy and performance of the time on the watch.

The timegrapher measures various aspects of a watch's movement and provides valuable information about its health and timekeeping capabilities. Some of the common timegrapher numbers include:

Rate (in seconds per day): The rate is the most crucial measurement and represents the watch's accuracy. It indicates how many seconds the watch gains or loses over a 24-hour period. A rate of 0 seconds per day means the watch is keeping perfect time, while positive values indicate it is running fast, and negative values mean it is running slow.
Amplitude (in degrees): Amplitude measures the arc through which the balance wheel swings. It reflects the health of the watch's movement and its ability to maintain accurate timekeeping. Proper amplitude ensures that the balance wheel has enough energy to perform its oscillations effectively.
Beat Error (in milliseconds): Beat error measures the consistency of the balance wheel's back-and-forth motion. A low beat error value indicates good stability, while higher values might suggest issues with the escapement.
Beat Rate (in beats per hour): Beat rate represents the frequency at which the balance wheel oscillates. For most mechanical watches, the standard beat rate is 28,800 or 21,600 beats per hour.
Lift Angle (in degrees): Lift angle is specific to watches with certain escapements (e.g., lever escapement). It measures the angle through which the escape wheel moves when releasing energy to the balance wheel.
Beat Number (in beats per hour): Beat number indicates the number of vibrations (beats) the watch's balance wheel makes in one hour.
Power Reserve (in hours): In some advanced timegraphers, the power reserve can be measured to determine how long the watch movement will run before needing to be wound again.

Timegrapher readings provide insights into the condition of a watch movement, helping watchmakers diagnose issues and regulate the watch for optimal accuracy. If you go to a legit TD they will take a picture of the timegrapher data so you know its gucci. Usually a rep can run -/+10 seconds off. Don't sweat it, even auths need to be serviced to be maintained, a Rolex typically has a precision about -/+ 2 seconds.

Values for the AUTHENTIC Rolex Datejust 31 are below. Some of the values listed above will be relative to the watch's health.

Amplitude	275 and 315 degrees
Beat Rate (BPH)	28.800 BPH
Lift Angle	52 degrees
Precision	-2/+2 sec/day

Timegrapher numbers for a Rolex Lady's Datejust 31: In addition to the above, the movement of the watch is 3135. This is the most common Rolex movement fitted into multiple sports watches. It is a three hand with date function displaying hours, minutes, seconds and the date. It is widely regarded as one of the wonders of horology boosting 31 jewels, and a 50 hour power reserve. The 3135 movement began in 1988 and has been fitted into the following watches: Oyster Perpetual Date, Datejust, Submariner, Sea-Dweller, Yacht-Master and the Deep Sea Sea Dweller.

You're not going to get that. You can find something really close to that, but it's literally like wanting your flap to be identical to auth. go buy the real thing if you want the thing that makes the company renown.

Source

Guide to Quality Checking (QC) a Replica Watch

QC TOOL: https://watchqc.com/

Junk & Entry Tier QC guide

It needs to be pointed out that ChinaTime level sellers will do a number of things if asked for QC shots of a watch you’re interested in buying. None of which are done consistently by any of them, nor is there a regulated process.

This includes:

1. A quick view video of a watch you have requested, usually flipped around while being held to show different angles. This is usually one they happen to have on hand (sellers don’t hold on to stock as it’s too dangerous – they source per order)

2. A video they send to multiple buyers (often exactly the same video) of the same watch from the same batch.

3. Photos you’ve probably already seen before used of the watch on multiple different dhgate stores and can easily recognise. These are used by many sellers as they simply don’t have any other photos of that particular watch.

4. Some low quality phone photos of a couple angles. Usually taken when they have one around or have taken before to send QC pics to another buyer.

4. Photos or videos showing you the actual watch you are being sent just before it gets packaged up with your postage label. These are often done after you’ve ordered and paid and it’s about to be sent out.

The ChinaTime QC process is different to the QC process on r/RepTime where sellers show you the exact watch you have bought, allowing for feedback, RL (Red Lighting aka Not happy with quality so sending it back) or GL (Green Lighting aka I am happy with this watch so let’s fucking gooo).

ChinaTime level sellers shift a high volume of product in short timeframes.

Don’t expect a RepTime level QC process for your $80 shitter.

Higher Tier QC Guide

Before we jump into QC, I want to clarify some of my vernacular when discussing replica watches:

Flaw: A difference between a replica in its attempt to imitate the genuine watch (e.g. incorrect hand stack on a GMF BLRO Pepsi)

Defect: An error during manufacturing or assembly that deviates from the specified requirements (e.g. crooked indices on an ARF 114300)

Okay, now that we’ve got that out of the way, in order to understand what QC is, let’s start with what the QC process isn’t.

The QC process is not:

To compare how close the replica is to genuine
Window shopping
An opportunity to correct specific flaws or defects on a replica

QC is not an opportunity to compare how close the replica is to genuine

This should take place before QC during the research about which model to buy. All replicas have flaws. “Super reps” have flaws from genuine. Even genuine watches have flaws! It’s your responsibility as the purchaser to do your due diligence and find watch models from factories that have flaws that are tolerable to you. You should become intimately aware of the flaws of the models you are considering. The forums and this subreddit contain many images of actual watches people receive.

Use the search bar and get well acquainted with the model you plan on purchasing. This way when your QC pictures arrive you aren’t startled when the date font is too bold – looking at you ARF 126334, or some other well-known flaw compared to genuine. If you’re looking for near perfect, buy genuine. Buying a replica watch is a fun experience. Let it be.

QC is not window shopping

Trusted Dealers are running a business. Side note: I’m not exactly sure how the logistics of their business functions, but if a TD or other more knowledgeable person wants to chime in below it would be a happy learning experience for me and everyone else. The remainder of this entry will go on my assumptions as to how the business functions.

TD’s buy replica watches from the factories. They pay for the replicas out of the money you paid them for your order. This is why payment precedes QC pictures. Now they have invested in inventory that needs to be sold. Some inventory moves quicker than others due to popularity (SS 116610LN, AP ROO, etc.) so they probably have a continuous flow of demand for some of these watches, but they don’t really “stock” watches in a traditional sense and definitely not for less popular models.

They source each watch you order individually. When you decide to RL a watch you’re preventing them from selling stock that they’ve already used capital to purchase. Essentially, you’re frustrating their cash flow. They’re now stuck with a watch they need to wait for someone else to order before they can make their money back. This makes it difficult on the TD, harms their business, and may result in the TD refusing to sell you a different watch.

They also have to go and source another watch for you (consuming more capital and eating into their margin). It is my understanding that sometimes they can return a watch to the factories if it is defective, but this is where my knowledge of the business isn’t clear. Regardless, the best-case scenario for TD’s is returning a watch and spending a lot of time and effort sourcing another watch instead of fulfilling a new order (opportunity cost), and the worst case is being stuck with a watch that has nothing wrong with it and having to wait for a new order before getting paid for it. That’s a lose-lose scenario for the TD.

What is important to remember here is that the factories and TD’s aren’t in the best conditions, nor are they participating in legal activities and are under constant scrutiny from their respective governments and law enforcement agencies. Replica watch "factories" aren’t large buildings with assembly lines.

Typically they are small operations that can be easily moved or hidden from police/governments hunting for them. Factories and TD’s have a lot at stake doing business with us and we should ensure we properly acknowledge that and use their conditions as the context for how a replica watch gets in QC pictures. It’s quite a marvel all things considered. Caveat: I am well aware that TD’s sometimes try to hide very obvious manufacturing defects to move undesirable inventory, we’ll cover that more below. Be patient.

I’m not saying to never RL a watch. There are good reasons to do so that we’ll discuss below. I am saying that you should carefully consider the defect on the watch you are presented and decide for yourself if you can live with them. Remember that the images you’re seeing are close up of an object whose size is measured in millimeters. Many defects can’t be seen at wrist level or without close inspection. There is a good reason to carefully consider the decision to RL. QC is not a carousel of watches, rather it’s like a slot machine or a game of Russian roulette because the next one the TD can procure could have worse defects than the watch you RL’d.

I’ve never tried this, but If you RL the watch in your QC pictures I don’t think the TD will sell it to you if the RL’d watch ends up being better than the following watch. So there’s a risk with RL’ing. Keep in mind that manufacturing happens in batches and there is a chance that most of a batch has similar defects. You never know what you’re going to get. Think slot machine, not carousel. That’s part of the fun! Sometimes you hit it big and your rep doesn’t have any serious defects and looks flawless. Other times you’ve gotta swing the RL hammer, but only if absolutely necessary.

This segues well into our next topic.

QC is not an opportunity to correct specific flaws or defects on a replica

I see a lot of new people have a misunderstanding when reviewing their QC pictures that if they ask the TD to correct a specific flaw that it will be corrected. This is not the case. You either accept the watch presented or you RL and are presented with an entirely new watch. They can’t realign indices or center dates in a date window. Nor should they. Their business is simple: source the “genuine” replica watch you request and ensure it is shipped and delivered to you.

That’s it.

They make money sourcing and shipping watches. TD’s exist to protect us from a veritable ocean of scam sites that sell us DHgate watches for thousands of dollars. Buying through a TD means the watch you receive will be made by Noob, ARF, V6F, etc. and that you will receive it despite customs seizures.

They are not watch smiths.

They are not watchmakers.

They are not jewelers.

They are dealers.

Dealers that are trusted because they have a multitude of historical transactions and a reputation that they will deliver “authentic” replica watches from the factories they advertise.

Okay. Now that we’ve cleared up some common misconceptions with QC pictures, where did the concept come from? After doing some digging on RWI, the concept of QC photos was first introduced around 2009 by a previous TD that, from what I can tell, has since ceased operations. QC photos are an inconvenience for the dealer and replicas used to be sent without QC photos; however, in the years following their introduction we have become accustomed to them and now expect them. It benefits TD’s by giving customers a unique experience, for example, PureTime does waterproof testing in addition to photos.

That’s a bit of competitive differentiation in customer experience if waterproofing is of interest to you. It can also help the TD’s to avert negative interactions with their customers by allowing us to see what we will be receiving before actually receiving it. This practice is unlike any other eCommerce practice and I can’t think of another online transaction where I get a preview of the literal unit I will receive before buying except maybe automobiles. And even then, sometimes not. Hopefully, this helps you to understand that we should be grateful we receive QC pictures at all and to give credit where credit is due with the TD’s. There aren’t other eCommerce businesses that operate this way.

What is the purpose of QC? QC Photos are:

To ensure you will be receiving the correct factory and model of watch ordered
To find clear defects that do not meet your subjective standard

QC is to ensure you will be receiving the correct factory and model of watch ordered

This is important! If you ordered a ZZF 116610LN V2 it is important that you receive that model from that factory and not a Noob or ARF 116610LN because it will be difficult to make an exchange or other remediations due to the logistical nightmare that is the international business of counterfeit goods. You want the right watch delivered the first time. Sometimes there are mix-ups or errors and I suppose there could be a more nefarious motive, but that has never been my experience and would certainly be a huge outlier. TD’s are trusted for a reason.

That doesn’t make them perfect or free from making clerical errors given their working conditions and language barriers. If you aren’t sure you are receiving the correct model or factory, post it and ask! We love to help. If you ordered an ARF 116500 Panda, but are shown an ARF 116520 white dial, you’ll know to ask the TD to please present you with the correct model you requested. Please be courteous and respectful. I’m sure they’ll be happy to do so. Remember they still must go and return the incorrect watch if they can and go source the correct watch. Be patient.

QC is to find clear defects that do not meet your subjective standard

This is a tricky topic to address. You are looking to identify defects with the replica that aren’t up to your standard. You should be looking for things like crooked indices, alignment of bezel or dial elements like coronets or logos, missing lume, offset chrono hands, and other defects. Also check to see if there are any visible signs of cosmetic damage like scratches, scuffs, etc. on the case, bracelet, clasp, and other watch components.

Be aware that TD’s are dealers or salesmen. They want to sell watches, even ones with severe defects. I’ve seen TD’s move the watch hands to cover a crooked logo or hold the watch at strange angles to make alignment defects look less severe. You can request additional pictures with watch hands in different positions. You can ask for a straight-on photo. This is acceptable and should be done if you have suspicions. Be prepared to wait for additional pictures though. There shouldn’t be obstacles to you being able to see defects, but once you’ve identified defects what do you do then?

Now, here is the difficult part. What should you RL and what should you live with? For me, I air on the side of GL all the time. This means I look at QC pictures with the intent of GL'ing and then have to find something outlandish to shift my opinion. Excessive RL’ing can harm the livelihood of the TD’s and ultimately affect the price of replicas in general. I also have a realistic idea of the standard of quality I should expect from a replica before I place my order.

For a first time or inexperienced buyer, this may not be the case, especially if they haven’t done enough due diligence on the model they’re purchasing.

What do I RL? Indices that are egregiously crooked, date wheels that are excessively off-center making them difficult to read, etc. Essentially anything that will bother me to the point of not wearing the watch. This is very subjective and hopefully, your expectations will improve with experience. I highly recommend that before you make a purchase, find QC pictures of the watch you will be ordering and see what others have GL’d and RL’d. Focus primarily on the GL’s. You’ll see many slight defects that get approved. If your watch ends up having them, please GL.

You’ve seen the defects. You know they are present in other watches. Keep the replica economy going. Learn to love and accept these discrepancies. These small defects make the watch unique and many of them can be modded away if they wind up seriously bothering you (crooked indices replaced by genuine or modded dials, etc.) Look and see what experienced users RL. This will help you to establish good expectations and what justifies RL'ing a watch.

Conclusion

Ultimately, it is up to you. Remember, that our small high-quality replica economy depends on the integrity of both TD’s and buyers. Hopefully, this post has helped you understand the consequences of RL’ing and that you’ll put more effort into properly establishing your expectations through due diligence and research. I hope that you’ll give a higher level of consideration to RL’ing.

It isn’t a trivial matter for our TD’s even if it seems as trivial as a set of new pictures in our email inbox for us. Again, I’ll restate that I’m not against RL’ing. I just want people to RL responsibly with proper expectations and education behind their decision. I’m not encouraging you to buy defective products, just make sure you know the difference between defective products and acceptable ones; sometimes the line between the two is exceptionally thin. It’s up to us to preserve the integrity of our niche community because we could just as quickly destroy it.

Good hunting.

Most factories won’t take a watch back for a majority of the RL issues, so the dealer has only some choices.

Order a replacement at dealer cost. Try to sell the RL watch to another.
Try to fix the issue
Refund the customer
Swap for a different watch
Argue with the factory for a replacement (requires lots of previous examples proving the problem is unique to that one watch. If this happens too many times factory may refuse to sell to that dealer

Source

How to Read a Timegrapher

So you’ve got the QC images or your brand new best replica but what about your timegrapher results?

Timegrapher reading

Presets

Beat Number

Frequency, the vibration of a movement. The number of balance wheel swings per hour or how many times the watch ticks per hour. This is a preset, depends on the watch you order.

14,400 bph = 4 beats per second

18,000 bph = 5 beats per second

21,600 bph = 6 beats per second

28,800 bph = 8 beats per second

etc

Lift Angle

The angle the balance passes through while interacting with the pallet fork. Important to be set correctly in order to calculate the Amplitude. This preset is per caliber specs.

Most modern watches have a lift angle of 50 – 52 degrees. Generally lift angles range from 44 to 58 degrees. Some other settings are present, for instance Gen co-axials angle is 30 degrees.

Results

Rate

How fast / slow the movement runs (in seconds per day)

great : +/- 5 s/d

acceptable : +/- 12 s/d

If higher / lower?

It is possible to adjust this yourself or ask your dealer to nudge it a bit.

Amplitude

The measure of the amount of rotation in the swing of the balance wheel, in either direction.

Amplitude is higher when a watch is lying flat and usually falls when the watch is in a vertical position, due to increased friction. Amplitude can also fall as the watch winds down and the mainspring delivers less power.

Amplitude is a good indicator of the movements health and if is too high or too low, or that changes too much in different positions, can indicate a problem with the movement.

great : 270-310

acceptable : 250-270

If higher / lower?

Ask for a different watch or have your watch serviced

Beat Error

The amount of time by which the duration of swing differs from one side to the other in the oscillation of a balance wheel. Generally speaking to get a beat error of zero, the roller jewel in the pallet fork must be perfectly centered.

great : 0.0-0.5 ms

acceptable : 0.6-1 ms

If higher?

Ask for a different watch or have your watch serviced.

* Please note that if you are reading your QC from the dealer, you will generally receive only the results of the watch lying flat. All the above recommended measurements are from that position. The measurements in other positions may vary.

Source

Rate is the first number you see on the top left side of the display. This number describes how much time the watch is either gaining or losing per day. The great watches that has been tested and certified has a rate within +/-2s per day in 4-6 different orientations. For these rep movements and low-end Asian movements you can be pleased with +/-10s per day in the "dial up" orientation.

The second number is the amplitude. This number is how far the balance swings from its resting position, i.e the total swing angle of the spring. This number can vary quite greatly without to much impact on the time keeping and the number varies based on how far the mainspring is wound, the best way to test the amplitude is to wind the mainspring fully wait 1 hour and then test it. Most movements stay within 260-300º, with a lot of rep movements hitting higher than that.

A common misconception is that you want a super high amplitude.

While it's true that a high amplitude is an indication of a healthy watch, to high of an amplitude can cause damage to the escapement parts and wear it out faster or cause an issue known as "knocking" where the impulse pin swings to far and hits the pallet "in the back". (Graph showing knocking)

The third common number is the beat error. The beat error is the difference in time between the "tic" and the "toc" of the watch. This number in a genuine watch, even lower grade is most often 0.0ms. In a rep movement I believe you can be pleased with everything under 0.7-1.0ms. Bigger differences in the beat error can be a early indication of damage to the balance spring.

The last number is this lift angle. This number is a predetermined number which is based on the angle between when the impulse pin hits the pallet and when the pallet catches the next cog on the escape wheel.

Error creating thumbnail: Unable to save thumbnail to destination

Another number that can be seen often in the QC pictures are 21,600 or 28,800. This number is the number of beats per hour or BPH. This equate to 6 or 8 beats per second, most common in alot of high end reps is 28,800.

The lines on the graph can help you get a visual representation of how the watch movement is behaving. The rate of the watch determines the angle of the lines, lines going "up" means the watch is gaining time and lines going "down" means the watch is losing time.

The beat error determines how far apart the two lines are, if the beat error is 0.00 you should only see one line on the graph.

How to set up your Manual Watch

File:How to Wind a Watch.mp4

WATCH WITHOUT DATE or WATCH WITH DATE, WITHOUT QUICKSET

The crown has 2 positions:

1. Normal position - wearing position

In this position the watch can be wound using the crown. Turn the crown forwards until you feel resistance - DO NOT OVERWIND THE MECHANISM. Winding the watch once a day should be enough to ensure the correct functioning of the watch. When the crown is positioned against the case this ensures that the watch is water resistant. Please note that must of Factories and TD do not guarantee the watch being waterproof or water resistant.

Make sure that when you handle the crown in any way the watch is in your hand, not on your wrist. This is because there is a possibility you bend or damage the crown tube and / or case of the watch, should you handle the crown when the watch is on your wrist.

2. Pulled out position - time (and date) setting

When the crown is pulled out, it can be used to set the time. The crown can be turned forwards and backwards. To set the date please keep moving the the crown forwards (clockwise) to the desired date.

WATCH WITH DATE QUICKSET

1. Normal position - wearing position

2. Pulled out once position - date setting

When the crown is in this position the crown can be turned upwards to change the date. When using the quickset function to change the date please make sure the time is first set to 6 o’clock. This is because around 12 o’clock the watch itself is mechanically changing the date. Should you try to change the date manually when the watch is using this function there is a chance you damage the mechanism. When the time is set at or around 6 o’clock this mechanism can not be damaged.

3. Pulled out twice position

Time setting When the crown is pulled out twice, it can be used to set the time. The crown can be turned forwards and backwards.

Chronograph Manual

Using a chronograph:

1. Your watch has 2 pushers. The top one, pusher A is usually used to start and stop the chronograph. The bottom pusher, pusher B, is used to reset the chronograph. The chronograph can be used as a stopwatch, for example to measure lap times. Note: never push both pushers simultaneously.

2. The second-hand of the chronograph is the long central hand on your watch. A watch with a chronograph usually has a small seconds hand in a separate sub- dial, for the time function of your watch. Please do not keep the chronograph running all the time, as this takes a lot of power reserve from the mechanism.

3. Usually a chronograph has 2 or 3 sub-dials / counters. One is used to show the seconds, this hand is always moving as it shows the seconds of the time, not the seconds elapsed when using the chronograph. The other two sub-dials are used to show the elapsed minutes and hours when using the chronograph. When the chronograph is not being used the hand of these sub-dials should be centered pointing towards 12 o’clock.

ROLEX OYSTER DAY-DATE, QUICKSET

To change the time or date, or to wind the watch by hand, you must fist unscrew the crown from the case, ‘hen pull it until the required position is reached. Always perform these operations with the watch in your hand and not on your wrist. When you are done, make sure the crown is Screwed down to the case again before you wear it.

ROLEX OYSTER WITH DATE FUNCTION

To change the time or date, or to wind the watch by hand, you must first unscrew the crown from the case, then pull it until the required position is reached. Always perform these operations with the watch in your hand and not on your wrist. When you are done, make sure the crown is screwed down to the case again before you wear it.

List of Known Watch Factories

ZF: High quality factory for most non-Rolex watches. Overall a good factory with solid releases. Just starting to branch into AP and RM, and they are pretty good.

Noob / N Factory: NOW CLOSED :( Noob factory is probably the most famous factory among others, they started a very long time ago and really developing their piece of replica. Noob makes a decent submariner, but have a great Daytona with clone movement, and a good pepsi insert. Besides Rolex, Noob also developing some brands like some Planet Ocean Omega, Blancpain, some Audemars Piguet models, and some Panerai model. Recently (5/12/21) Noob was hit very hard in a raid so their models are on hold for ~6 months (rumor on timeline).

VSF/V6F/XF/HBB/KW: All fall under a common parent company, but VSF specializes in Omega and Rolex super-reps and Panerai, V6F does quite a bit of projects (though the name isn't used much nowadays) and XF focuses on Audemars Piguet but recently ventured into Vacheron Constantin. HBB does Roger Dubuis.

ARF/JF: JF is the brand name of AP reps. High quality, great detail, though ZF is showing them a run for their money these days. JF also makes middle-high tier Rolex watches among others. ARF is a division that focuses on high quality Rolex releases that focus on finishing. Rumor that JF is closing.

JVS: Newer factory as of 2021, takes inspiration from VSF and aims to release high quality Rolex releases.

ZZF/Clean: Quality releases recently for Rolex. Rebranded to Clean factory. Be aware of fake

PPF: Supposedly family of ZF, but focused on Patek. Has the best current Nautilus

BP/GMF: BP is one of the OG rep factories. Has reps of most brands and models, and are at an affordable price. GMF seems to be a higher end brand focusing on finish, but sourcing from similar places.

MK/MKS: Focuses on IWC, Patek and Omega releases, though they have branched into other brands too.

TF: Specializes in tourbillons (hence "T" F), but most are 42mm and kind of thick.

GF: Originally started focusing on German watches ("G"F), but have branched into many other Swiss brands like JLC and Cartier. Creates 'copy cat' models for a bit cheaper, and sometimes surprises with improved details

FK: Makes quite a few reps, most are not very good or just barely miss the mark for one specific reason. However, their Breguet 5177 v3 watch is superb!!! So do not underestimate any release of theirs.

JKF: Joker Factory

R Factory: Rolex

YLF: Connected to ZF, focuses on IWC

VRF: Specialized in the Rolex arena with an excellent sub, excellent new VR3135 movement, and gold wrapped subs too.

OMF: Focuses on middle tier quality and prices, but recently have high quality Omega releases

PF: Revolutionized the Nautilus market with the first thin Nautilus. However, they were recently outdone by PPF and 3K. Focused on Patek, but have other releases.

3K/BTF: clone Patek movement releases and excellent Daytona reps.

JJF: Focused on Vacheron and Patek releases, came out with the great Overseas rep. Rumor is they shut down though.

TTF: Higher end Entry tier quality watches.

GDF: Higher end Entry tier quality watches.

TWF: Taiwan Factory. Specialising in Cartier but with a number of other watches for low prices but decent quality.

Gold Factory: Mainly make Rolex reps

APS: Rolex & Audemars Piguet

8848F: Make a lot of Cartier watches

How to Identify Scammers & Avoid Scams

What can we do to prevent being scammed? And, whom exactly is responsible for preventing or at least reducing the potential of being scammed here?

Simply stated: It is up to each and everyone of us to conduct our own best due diligence to prevent being scammed prior to participating in any m2m sale.

Of course we know to research an item before making a purchase. The more we know, the better the experience.

Always commit yourself to finding out as much about the member posting the item for sale as possible.

The forum makes it rather simple to check out the selling members join date, along with his/her posting and sales history. Take time to read the type of comments the selling member makes in his/her post history. Look for any potential red flags, negative or derogatory comments. See if you can follow a previous sales post involving the seller whereas he/she was the actual buyer.

If you find any comments that appear to be misleading in any way, dig deeper:

What kind of buyer or seller have they been?
Is there a previous history of nuked sales, withdrawn sales?
Have they been repeatedly asked to clarify or provide documentation?
Did they fail to respond to specific questions?
Any history of hesitation or refusal to respond to a sales mod?
Is the seller using the correct sales form and have they completed it accurately and clearly?
Are they claiming to be selling the item for a friend ?
Is the seller keeping the sales post open after claiming it is sold?
Has the seller suddenly sent you a PM offering a special lower price , if you buy now or send payment via PayPal family and friends?
Does the seller appear to be posting several items for sale all at once?
Are they listing items for sell at considerably lower than average pricing?
Is the seller posting several sales in various m2m sales areas for gen items, replicas etc?
Does the seller react adversely to questions or comments concerning authenticity of the item for sale?
Do you get a feeling that something is off about the seller or the item for sale?

We all have an inner sense of intuition. If you have a gut feeling something is not quite right, dig deeper, ask more questions. If you are not satisfied with his/her answer – walk away. There will always be another great watch that you just have to have.

Remember, patience is a prime factor in this hobby.

Before you spend your first dollar in this hobby, ask yourself this question: Can I afford to lose my hard earned money?

If you feel in any way that you can’t afford a loss, then just don’t do it.

You are responsible for you. You are the only one responsible for your actions. The forum is not responsible for your decisions or the choices you make here, nor are the admin/mods, the TD’s, or anyone else, Just you. If you can’t take full responsibility for your own actions, decisions, you certainly can’t expect anyone else to.

The absolute most important thing after accepting responsible is to be prepared. Prepare yourself to avoid being scammed by educating yourself. Use the forum resources to educate yourself on every aspect of this hobby. Educate yourself to know the best factory, the pros and cons of each replica. Educate yourself on the genuine watch you like.

Familiarize yourself with the brand. Know what the gen looks like, feels like, it’s specifications, how it functions, the type of movement it has. How can you expect to find the most accurate replica if you don’t know all there is to know about the gen.

Finally, make your own decisions based on your own research to spend your own money.

Each of us must be prepared to take the full responsibility of our actions.

Source

Wrist Watch Size Guide

Find the best watch size for your wrist. Use this guide to size up the watch to best suit your wrist width.

Here is a complete watch size table, including lug to lug distance, that will help you find the perfect watch for your wrist size.

Always remember: in any case, you don’t want the lugs to overhang the width of your wrist.

Factors That Affect the Subjective Watch Case SizeRemember: the case size is only a small portion of the watch size equation. Many other factors will change your perception of a watch size.

The Lug to Lug DistanceA really important aspect of a watch size is the lug to lug distance. This is almost as important (if not more) as the watch case size in itself.

The lug to lug distance is the distance between the lug (or tip) of the watch at the top of the watch head and the lug at the bottom of the watch head.>

The lug to lug distance should be as small as possible to work with your small wrist. Try to keep the watch head within the limits of your wrist width as much as possible.

The reason is simple: we want the watch head to fit within your wrist width.We don’t want it to stick out or overhang. It just doesn’t look good.

If you have small wrists, you might have a hard time finding watches that fit within your wrist width.

My wrists are so thin that most watches visually touch both ends of my wrist. There is just no way around this for me, given my tastes and budget. But I try to keep that lug to lug distance as short as possible.>

So, what’s a good lug to lug distance for your wrist?

The lug to lug distance of a watch will suit your wrist when it is 75 to 95% of your wrist width. The variation accounts for the different wrists shapes and personal preferences.

You see, some of us are blessed, some not so much.

The weird thing is that your wrist size (or circumference) does not relate directly to your wrist width.

If you have a flat wrist, you’re lucky. Most of the circumference of your wrist will serve as the flat area where your watch will sit, allowing for a larger lug to lug distance.

But if you have thicker or rounder wrists (or if your wrists are very small like mine) well, you’ll have to settle for smaller timepieces. Don’t fear, there are still plenty of great mens watches for small wrists.

(Again, to have an estimate of your wrist width (its flat surface), you can easily measure your wrist size in millimiters and divide its size by 3. And remember to check in the watch size guide table above what lug to lug distance will work on your wrist.)

Now, an interesting thing is that the lug to lug distance is not in direct proportion to a watch size. Some 41mm watches have ridiculously long lugs, with a 50mm lug to lug distance (I’m looking at you, Tudor Black Bay!).

Some are the exact opposite. A notable example is my beloved Citizen Promaster Nighthawk: 42mm in diameter for 46.5mm lug to lug distance only!>

So always try to know (or measure by yourself) the lug to lug distance before committing to buying a watch. And remember: a small watch doesn’t always have a short lug to lug distance.

The good thing is: the other way around is true too!

The Shape of the Lugs: Flat vs Curved

Something else to know about the lugs (even if it seems pretty obvious): some are almost flat, and some are more curved.

If you have smaller wrists, you want to get a watch with curved lugs as they will hug your wrist better, and not stick out like marshmallow roasting sticks.

And if you really like a watch with flat lugs, just make sure that the lug to lug distance is still within your wrist width for the best results.>

Trust me: I’ve bought 3 watches with a 50mm lug to lug distance and flat lugs. The watch would not sit flush against my wrist at the lug tip, leaving a big and gap between the tip of the lug and my wrist.

Not to mention that they overhung… Not only was it painful to look at, but it was really uncomfortable. Don’t make the same mistake.

The Hour Markers Circle

Okay, now we’re getting serious. Remember when I said that the watch case size is not everything? Well, here is a not so obvious reason why.

The hour markers circle size is another important factor that makes a watch look bigger or smaller. Maybe you read or heard some people telling that a “42 mm watch wears like a 40 mm”.

This is because the hour markers circle size is small for the watch case.

This is not really a physical dimension, but it’s one that is most definitely visible when you look at the dial of a watch.

The hour markers circle size is measured from one tip of an hour marker on the dial to the tip of the opposite hour marker.

Again, you can get more information about this in my How To Measure A Watch Case Size article.>

As you can see on my Citizen Promaster Nighthawk (on the left), the crystal is huge. It fills most of the 42 mm case, yet the hour markers circle only measures 26 mm.

On the other end of the spectrum, that 42 mm Hamilton Pilot Day Date Automatic (Amazon link) has a whopping 35 mm hour markers circle size. Yet it has the exact same case size than the Citizen!

I love the Hamilton, but it looks huge on me – even with its 48 mm lug to lug distance.

The Hamilton has thick lines at the edge of the dial that really stand out in real life (more than the numbers). That’s why I measured the hour markers circle there.

As soon as I began to get this measurement on watches – either in real life or on pictures – I could know if a watch would suit my wrist (granted the case size and lug to lug distance was good too).

On my 6 inch wrist, I find that 30mm is as big as the hour markers circle can get. I only get a watch with a greater hour markers circle size if all the other boxes are ticked and I really, really, really like it.

So, watch out for this hour markers circle.

The Bezel

Watches with a bezel have a smaller hour makers circle, and so will look smaller. A 40mm watch with a bezel will always look smaller than a 40mm watch with no bezel.

For example, my Orient Ray 2 has a case size of 41.5mm. Yet it looks smaller than my Seiko SRPB41, measuring only 40.5mm.

Why?

The Orient has a 25mm hour markers circle, while the one on the Seiko is 32mm! (I know I said 30mm is the maximum for me, but I don’t care, I really, really like it :P)>

If sports watches are more your thing, finding a watch that will suit your small wrist should be fairly easy. Sports watches often feature a bezel.

The two most common bezel types are the ones you find on dive watches and chronographs.

The first one features a rotating bezel counting the elapsed time underwater by 5 minutes increments.
The second one is a tachymeter, giving you a speed by timing the time you take to drive one mile.

There are other bezels out there, but they will all reduce the hour markers circle size, so pick your favorite one.

Some dress watches feature a bezel too, but not as thick and prominent as the one you might find on sports watches.

If you’re really into the more dressier side of watches, pay attention and get a watch with a bezel (that is part of the case, most of the time), if possible.>

For example, the Rolex Explorer above (which looks stunning, by the way) has a fixed polished bezel that will reduce the size of the dial. And consequently, the hour markers circle as well.

The Chapter Ring

Sometimes, the rotating bezel is not on the outside of the watch, but rather under the crystal. Inside the case, it’s not called a bezel, but a chapter ring.

And guess what: a chapter ring also changes the perception you have of a watch size. It will give you the same benefit as a bezel, but with a different look: you’ll get a much bigger crystal.

Just be aware that a watch with a bigger crystal will still always look bigger than a watch with a smaller crystal.

But once you know that, it all depends on the look you’re after. Bezel or chapter ring? It’s up to you.

Many watches have chapter rings, including watches with bezels. Some are thin, some are large. Some are fixed, some are rotating.

It doesn’t matter, they have the same effect: they keep the hour markers away from the edge of the case. So that the subjective size of a watch with a chapter ring will be smaller.

One of the most pleasing chapter rings you get (in my opinion) is the one you find on some pilot watches: the slide rule.

It looks good and it’s super useful (to convert currencies while abroad, for example). Another popular chapter ring is the compass you find on hiking watches. Again, pick your favorite style.

The Color of the Dial: Dark vs Light

If you take two exact same watches – one with a light dial and one with a dark dial – the one with a dark dial will always look smaller. This is because of the way our brain perceives the light reflected by objects.>

Of course, you don’t have to get a black watch just because it looks smaller.

But if you have smaller wrists and you like light dials, you should get a watch with a smaller case size and hour markers circle size than you would normally get to compensate that perception.

The Case Thickness

Thin watches for the win!

One last thing about the watch case itself. A watch will always look a bit smaller if it’s thinner. The effect is not as visible as having a small case size, lug to lug distance, hour markers circle, or dark dial, but it certainly helps.

You’ll have an easier time getting a thin watch by getting a dress watch (quartz or mechanical). Most quartz watches are super thin too.

You’ll get the added benefits of having a watch that fits easily under the cuff, and that is lightweight and comfortable to wear.

Thick watches (of more than 12mm) tend to be really top heavy, especially if you wear them on a band or strap.They might turn around your wrist and will always look a bit bigger.

Watch and Strap Sizing FAQs

Here are the answers to some common questions about watch sizing.

How Do I Choose a Watch Size?

The easiest way to choose a watch size is by using your wrist size and comparing it to the watch case size and lug to lug distance using the chart above.

We recommend a case size that’s 60% to 75% of your flat wrist width and a lug to lug distance that’s 75% to 95% of your wrist width.

Are Watches One Size Fits All?

It depends. If you have a fairly average wrist size, then you probably don’t need to worry too much about watch or strap size.

But there’s also a lot of misinformation out there in the form of people wearing watches that are too big (more common) or too small (less common). That’s why it’s important to know your wrist size.

Can You Adjust the Size of a Watch?

No. You can adjust the size of the strap, but there’s no way to reduce the size of the watch case.

How Do You Tell if a Watch Is Too Big for Your Wrist?

The easiest way to tell is by simply looking at it. If it looks too big, it probably is.

What Size Watch Band Do I Need?

The size of watch band you need for a watch depends on two factors: the lug width of the watch case, which correlates to strap width, and the circumference of your wrist, which correlates to strap length. See our sizing chart above for more information.

Is a 40mm Watch Too Big for a 6-Inch Wrist?

Yep—we recommend not going above 38mm for a 6” wrist. (That said, if the 40mm watch has a short lug to lug distance, you may be able to get away with it, but it’s unlikely.)

Guide to the Best Budget Mid-Tier Watches ($250-$400)

Mid-Tier Replicas ($250-400)

On a budget? That's okay! This list is for you. These are not the $500+ versions with super clone movements or hyper fine details. These are the better than bottom barrel, 'good enough' versions.

All models with an * are considered High tier (aka the best you can get and are quite good).

Rolex

Submariner 116610LN, LV and others: BP Factory ($350) (ZF 116610LN is $400), VRF ($320-$350)
Submariner 126610LN, LV and others: BP Factory ($350)
Submariner 116040 and 126040 (no date): BPF ($300)
*Explorer I: BP Factory ($300)
Explorer II 216570: BP factory ($350)
*Seadweller 16600: BP Factory ($300)
Daytona: VRF V2 (Panda / Black) modified 7750 at an affordable price of $378
GMT Master II (Batman, Batgirl, Pepsi, LN): BP Factory with incorrect hand stack movement A2836 ($300)
GMT Master II 5 digit 16710/16750: BP factory $330
Datejust 36 (all variants): BP Factory with 2824 movement ($300-$320), ARF ($400)
Datejust 41 (all variants): BP Factory with 2824 movement ($310-$320)
DayDate 36/40: BP Factory ($300+)
Oyster Perpetual 41 and 36: BP Factory ($320)
Yachtmaster 40mm: VRF with 2836 movement ($350-$370)

Audemars Piguet

*15450 Royal Oak 37mm: JF for $380
15400 Royal Oak 41mm: APSF v1 (might not be widely available) for $300
15500 Royal Oak 41mm: MPF ($300)
15703 RO Offshore: ROF ($400)
No other 'good enough' reps for AP. Recommend higher price bracket. See AP section for who makes the best.

Patek Philippe

Nautilus: BP Factory for $350.
Aquanaut: BP Factory for $350 (unsure if still made)
*Calatrava 5296: ZF for $400
Still recommend higher price bracket for Nautilus and Aquanaut

Vacheron Constantin:

*Patrimony Date: PPF for $318
No other good recommendations - for Overseas go for ZF (higher price bracket)

Tudor

*BB58: ZF ($300)
*BB36: KRF ($340)
Pelagos: ZF ($360)

Omega

*Planet Ocean 600m 39.5mm: VSF ($390)
*Seamaster Diver 300m: VSF/SBF with clone ($390), ZF with modified 2824 ($360)
*Seamaster Spectre: VSF v2 ($390)
*Speedmaster Racing Chrono 40mm: HRF ($380)
*Seamaster Aqua Terra 150m: VSF ($400)

Cartier

*Tank Louis: DRF for $248
*Tank Solo: K11 for $280
*Ballon Bleu 42mm: AF for $250
*Santos: F1
*Ballon Bleu 42: AF ($200-250)

IWC

*Portofino: V7F ($310)
*Mark XVIII Pilot: V7F ($350)
There are more <$400 IWC model available, check TD websites.

Jaeger LeCoultre

Master Ultra Thin Moonphase: AZF ($380)
Reserve de Marche: ZF ($390)

Panerai

There are reps that are <$400, but look for anything by VSF from a TD website

Richard Mille

Nothing noteworthy in this price range.

Source

Guide to Watch Movements

Common movements used in rep watches

Non-chrono

1. 21J/DG2813 (note that despite the “21J” description these movements usually run 23 jewels). This is a generic term used to cover a wide variety of cheap Chinese movements – some are better than others, but as a general rule they are low-beat (21,600vph / 6 ‘ticks’ per second) movements, very cheaply built (from as little as $7 for the whole movement) but generally reliable and easy to live with. Usually automatic, but occasionally hand wind, dependent on the watch. A lot of really nice budget watches come with these fitted and whilst the sweep isn’t as smooth as, say, a gen Rolex, they’re damned good value for money and can just be thrown away and replaced if they break or need a service.

There’s also the DG4813 variant, which is high-beat but this has become very difficult to obtain of late, so is not commonly seen. It has largely been replaced by the Z2 (see below)

2. Z2 aka ‘high beat 2813’ aka various other names. Some have suggested that this is one to avoid, but it’s not quite that clear cut. Basically a cheap 28,800vph alternative to the “Asian ETA” movements, these are occasionally swapped into existing models by the factories without informing the dealers. Reliability can be okay – provided you get a good one. The real issue is that there are no parts available, so servicing can be a problem. The Asian ETAs are a much better choice, but these are maybe worth considering if the price is right – just don’t be conned into buying high-priced reps with ’em, it ain’t worth it.

3. Asian ‘clone’ ETA (A2824/A2836 & variants): These are literally copies/clones of the equivalent Swiss (ETA) automatic movements. Generally high quality – although not as well built as the Swiss equivalents – but reliable and with parts generally available (which makes servicing an easier proposition than some other movements). High beat (28,800) and great value. Probably the best choice of movement for higher-quality reps as they give the smooth sweep found in most gen watches

4. Swiss ETA (2836/2824 as above): Supposedly the genuine ETA (owned by swatch group) swiss automatic movements. This is a complete lottery. ETA have not been supplying ebauches outside Swatch group for several years now. There are NO new ETA movements in reps any more – only refurbished (usually with Asian parts). On top of that, as anyone who’s been in the game for a while should know, factories tell the dealer the spec of the watch they’re producing – and the dealers then use that for their sales pitch. That spec often then changes dependent on what parts the factories have available on a particular day – about which they DO NOT inform the dealers. Given that dealers DO NOT take the back off the watch during QC (nor should they), they’re as much in the dark about it as you. At best you get a refurbished (i.e. used) movement with asian parts in it. I wouldn’t recommend spending extra for ETA in a rep these days – more often than not, you’ll be getting an asian clone.

5. Sellita: As mentioned above, supply of ETA movements is getting very difficult as Swatch group are no longer selling ebauches outside their own group of companies. Sellita are another Swiss company who make a very similar range of high-quality movements. We’ve seen a few reps with “Swiss ETA” being supplied with Sellitas, but they’re fairly rare.

6. Rolex 3135 copy (and other Rolex clone movements). This is an Asian clone ETA automatic movement with modified rotor and bridges to make it look more like the real thing. It’s not going to convince anybody who knows their Rolex movements and tends to be less reliable than the alternatives (as well as being more expensive!). There are newer versions beginning to appear which are a little more reliable and look closer to the gen, but they are still near impossible to service and generally inferior to the clone ETAs. Rolex have closed casebacks anyhow, so I really don’t see the point in paying the extra for what is, effectively, just a higher-priced and less reliable Asian clone movement.

There is one notable exception to the above – the Yuki-sourced movement used by JF in their new (as of 2017) high-end subs. This is a proper copy of the Rolex movements (to the extent of being compatible with a lot of gen parts) and is much better quality than the modified Asian ETA-based clones otherwise supplied in reps. A good movement and well worth consideration.

7. Miyota 9015. With the disappearance of gen ETA movements, some reps are now coming with Japanese Miyota-sourced movements. The 9015 is a case in point – a high-beat 28,800vph 25 jewel movement that is an excellent alternative to ETA or clone ETA models mentioned above. Highly reliable and very good quality. Don’t hesitate.

8. Miyota 8215. As above, a solid workhorse movement. The only gotcha is that the second hand on these movements tends to stutter a little and is therefore a lot less smooth than the 9015 or, say, an Asian 2836 clone. The amount of stutter is dependent on the weight of the second hand – the heavier/longer the hand, the worse it’s going to be. I’d certainly avoid this movement on watches such as Tudors which tend to have “snowflake” hands. Although the 8215 is reliable, for this reason I would tend to think carefully before buying a watch with this movement.

9. Sea-Gull. Sea-Gull are a chinese maker of both movements and watches. Quality is very close to that of the Swiss and Japanese manufacturers and they’re generally a very safe buy – they make clones of several well-known movements (such as the 6497) as well as their own designs. The ST2555 has lately been turning up in quite a few reps. As with Miyota, they’re a good choice. Don’t hesitate.

10. A6497/A6498: An Asian copy of the Unitas 6497 or 6498 movement. Common in Panerai and various others – it’s an ultra-reliable yet inexpensive hand wind movement available with or without swan-neck regulator. Note, however, that there are several different grades and some are better built than others. However, they’re easy to service and generally bombproof. Either 18,000vph (5 ‘ticks’ per second) or 21600 vph (6 ‘ticks’ per second) but it is hard to tell the difference visually due to the short seconds hand (where fitted). It can come with or without a seconds hand, but usually with. If it has a seconds hand, the 6497 has the seconds hand opposite the crown (i.e. at 9 if the crown is at 3) whereas the 6498 has the seconds 90 degrees to the left of the crown (i.e. at 6 if the crown is at 3).

11. Swiss Unitas 6497/6498: Again, a hand wind movement. They used to be found in some higher-end Panerai reps but that has now ended since ETA quit supplying ebauches outside Swatch Group some years back.

12. Molnija: Not common these days, but DSN and others have used them on occasion – mainly for vintage Panerai models. This is actually a Russian-built descendant of the Cortebert (latterly Rolex) hand-wind pocketwatch movements used by Panerai and others in the 40s-50s. Very high quality but parts can be tricky to obtain. Functionally similar to the 6497 above and generally reliable, but less robust than the 6497.

13. Asian 52010 aka Liaoning SL6601. This movement has started to appear in the IWC 5007 and could, of course, turn up in other reps with similar functions in due course. It supports secs@9, PR @3 plus date. Liaoning are another well-established Chinese maker of movements – quality is generally good, although parts can be difficult to obtain. Should be relatively easy to service and reliability appears to be decent.

Then there are a few that don’t fit any of the above groups. Movements advertised as “Asian 23J with power reserve” being probably the most common. These can vary from being basic 21J’s with an added module for the PR complication to something like Sea Gull’s 23J PR movement – the latter being of rather better quality than most other low-beat autos and likely to be long-term reliable. You’ll also see ‘Asian 35J” movements advertised fairly frequently – which can also be from a range of sources but are often higher-quality generic Chinese movements similar to the Sea-Gull mentioned above – not as good as a normal Asian clone or other mainstream movement and generally low-beat, but can be good value for money in the right rep. One last oddity worth mentioning is the A7750 as described below. This is sometimes used as a regular automatic movement with the chrono complications removed (most often in Panerai autos). In this form it is much less fragile and many of the caveats mentioned elsewhere no longer apply. Likewise you will – even more rarely – find the same non-chrono A7750 with the auto-wind mechanism removed. This essentially removes the fragile parts that can be damaged by hand-winding on the normal version and is, likewise, not subject to most of the caveats noted elsewhere.

Chrono

Japan OS chrono (aka Japan Quartz aka a variety of other names): Basically cheap quartz chrono movements (i.e. battery powered). Reliable, great timekeepers, cheap. There’s a couple of varieties with different features, but quality is the same. If you can live with a ticking chrono hand (and seconds subdial) rather than the smooth sweep provided by autos, then there’s no reason not to buy one of these. Note that there are ‘smooth sweep’ quartz movements available and they very occasionally show up in reps. They’re a bit more expensive than regular quartz, but good quality. The smooth sweep applies to center seconds (i.e. the chrono hand) only, however – not running seconds in a subdial.

A7750 (occasionally called Asian Valjoux 7750): The standard automatic chrono movement used in a vast range of replica watches. Usually high-beat (28,800vph), but there is an older low-beat (21,600 vph) variant which still pops up now and again. Occasionally converted to hand-wind and also used in some non-chrono reps. Can be fragile and is difficult to service due to the lack of available spares. When serviced and running properly, however, it’s solid and works well. See the separate sticky about caveats as there are problems with some adaptations to this movement: http://www.replica-watches-guide.com/forum…?showtopic=6101

A7753: This is a variant on the A7750 and not a true clone of the Swiss 7753. Its primary difference from the A7750 is that its native position for subdials is 3, 6, 9 as opposed to 6, 9,12 for the 7750. The resulting lack of transfer gearing needed to move the subdials into the more common 3, 6, 9 position reduces the distance between datewheel and dial eliminating the ‘sunken datewheel’ seen on many reps. These movement also frequently feature a pusher (usually flush) at the 10 position which operates quick-set date. So far it has only made it into a handful of fairly recent models (notably Panerai). In other respects it shares the same strengths and weaknesses with its A7750 sibling, but the lack of transfer gearing does make it a little more robust in some cases.

A7751: This is a goodie as it replicates all the functions of the genuine Swiss movement including working moonphase complication. Found in a limited number of reps (notably a couple of Longines and Patek models). Should be treated gently but generally appears to be reliable.

Swiss Valjoux 7750: Used to appear in high-priced reps occasionally, but no longer available to the rep makers since ETA quit supplying ebauches to makers outside Swatch Group.

Copy Venus (or sometimes inaccurately described as Lemania). Actually a Sea Gull ST19 – fundamentally the same as the original Swiss Venus movement as Sea-Gull bought the original tooling. This is an excellent handwind chrono movement. Very reliable and feels like quality. The most robust chrono movement in reps outside of quartz options. Don’t hesitate.

Source

3Hz is also called 21600bph or 6bps, 4Hz is 28800bph or 8bps.
The reason for this disparity (3Hz vs 6bps or 4Hz vs 8bps) is that the balance wheel advances the second hand both on the clockwise turn and counterclockwise turn, so a full turn cycle is 2 beats.
Chinese 21J, Chinese 23J – no-name movements, based on DG2813 (if you’re lucky) or the Chinese Standard Movement and company, that the Chinese have perfected… mostly when it comes to cost of production – they can make a shitty versions for under 10 dollars, but you cannot expect any kind of reliability from it. The worst versions can be found in Chinese street reps and tend to break after a few months of use. If you ever see something like a Daytona with days of the week and month indicator on the subdials, you can bet it sports one of those bad boys.
Some of the more reputable factories sometimes use movement called that and you can expect them to be of a passable to good quality then, but it’s still hit or miss.
Most of them are 3Hz, some are 4Hz.

DG2813 or other DG-something – firstly, it still might be the shitty movements described above (especially if called A2813), them being clones of DG movements, which are in turn clones of old movements from Citizen. If you get an actual DG2813, you should not expect amazing quality, but it is very reasonable for it to work for years (accuracy is another thing though).
Most of them are 3Hz, some are 4Hz (e.g. DG4813).

A2824, A2836 – the best of the best – ETA used to have factories in China, so the Chinese know how to produce the movements. The materials are somewhat worse than ETA required and the quality control is nowhere near what you would find in a gen Breitling or such, but they are reliable, any watchsmith can service or repair them, and replacements are freely available anywhere.
They beat at 4Hz.

A2892 – Chinese copy of a newer, thinner “version” of ETA 2824 – good movement, but way more rare and as such possibly slightly lower quality than the above two. Most of them will probably come from Sea-Gull, which would be good, but they might be QC rejects.
They beat at 4Hz.

A6497/A6498 – clone of ETA Unitas 6497/6498, great movement, simple, handwound, you are most likely to find one in a Panerai rep and you can’t really go wrong with this one.
They beat at 3Hz.

Swiss ETA 2824/2836/others – hit or miss – it depends on how the repmakers sourced it and how they stored it. I have a rep with a swiss movement and it performs beautifully, other people report the opposite – problems and having to replace. Could also get a Sellita instead of ETA (which is in no way a bad thing, Sellita is an excellent Swiss movement manufacturer and a former contractor for ETA).
They beat at 4Hz unless vintage (check specific model) or Unitas 6497 – 3Hz.

A775X (X is placeholder for other digits) – ETA Valjoux 775X clone, used in most rep chronographs. More costly to service and harder to source than other Asian ETAs, also more likely to break – all of this because it’s more complex. Check if the positions of the subdials were modified compared to the original – if yes, that’s a major yellow flag when it comes to relability and servicability. There are exceptions – ZF IWC chronos for example started using a sensible mod that you can safely go for.
They beat at 4Hz.

SA3135 – a modded A2836, may accept a genuine Rolex datewheel. Possibly the worst option you can get in a Submariner.
They beat at 4Hz.

SH3135, SH3131, VR3135 – Chinese “superclone” rolex movements, harder to service than A2836, but a lot of people prefer them because they can fit a genuine datedisc on them (not SH3131 because it has no date). Not actual superclones (as in there are differences between those and actual Rolex movements), but can be swapped for a genuine movement if you can get your hands on one.
They beat at 4Hz.

(S)A3186/(S)A3187 – modified asian ETA with contraptions that make it impossible to service and faulty. Best avoided, but currently the only way to get correct hand stack (as in order of hands seconds -> minutes -> 24hr -> 12hr) and setting method in Rolex GMT.
They beat at 4Hz.

A4130 – a weird mod of A7750 with subdials moved and possibly decorated, which is pointless in a closed-caseback watch. Comments about modified A7750s apply.
They beat at 4Hz.

SA4130 – either a complete superclone of Rolex 4130, or an ARF mod of A7750 – check if it’s from Noob Factory and expensive – if yes, its the former, otherwise the latter. ARF SA4130 simply doesn’t use the minutes and hours subdials (they are frozen) so there is little to no problem with added torque. If it’s not a new expensive Noob or ARF, it’s probably A4130 (described above) with an S tacked in front of the name.
They beat at 4Hz.

A8900/A8500 (in Omega reps) – movements modified to look like Omega calibers. Used to be modified ETA clones or even modified Chinese 21J/23J, but lately VSF started boasting a “superclone” version that gives the same functionality as gen. Some people seem to overhype those “superclones” as actual complete cloned movements – this is not actually the case, but they are reportedly more reliable than SA3186/SA3187s which strive to provide a similar functionality. Also, no rep Omega movements have the correct beatrate currently (3.5Hz), none have actual co-axial escapement (to my knowledge), and they use overlays with fake jewels, so take VSF’s “almost the same as genuine movement” with a grain of salt.
They beat at 3Hz or 4Hz depending on the movement used as a base. VSF “superclones” beat at 4Hz.

Sea-Gull movements – mostly good movements, but the versions used in reps are not exactly high end (more likely factory QC rejects or lower-tier versions).
Check specific model to know beatrate.

Miyota movements – mostly good movements, but the versions used in reps are not exactly high end (more likely factory QC rejects or lower-tier versions). People were high on Miyota 9015 at first (it’s thin like ETA 2892) because it made some thin reps possible, going as far as putting it in Tudor Pelagos for example, but in the end a lot of Miyota9015 reps have noisy rotors (unidirectional rotors can rotate in one direction freely so it’s harder to silence), so their expansion into the rep industry has been halted somewhat. Miyota 8125 is mostly an entry-level movement and often found in Submariner homages for example.
Another thing worth mentioning is that SevenFriday reps use Miyota movements for a different reason entirely – the gens also do.
9015 beats at 4Hz, 8125 beats at 3Hz, movements in SevenFridays beat at 3Hz (at least all of those I know about).
Written by u/eposseeker

Omega Buying Guide

What models this guide will cover: 2018 Seamaster Professional Diver 300m, 2019 Seamaster Diver Titanium model, Seamaster 300 "Spectre", Aqua Terra 8500/8900 series, De Ville Hour Vision, De Ville Prestige (Including Orbis), Constellation. I will update it time after time, probably the soonest update will be dedicated to Planet Ocean model and then im planning to add info about all 007 limited models.

If, after reading that guide, you would have any Omega related questions/thoghts, feel free to PM me or comment here.

1. 2018 Seamaster Professional Diver

Gen Specs:

· Width 42 mm

· Lug width 20 mm

· Thickness 13,7 mm

· Movement: In-house Caliber 8800, METAS-certified

· Frequency: 3.5 Hz (25,200 vph)

· Retail price: around 5200 USD

VSF Seamaster Diver 300m V2 Specs:

· Width 42 mm

· Lug width 20 mm

· Thickness 14 mm

· Movement: Asian ETA 2824 decorated to Omega 8800 Caliber

· Frequency: 4 Hz (28,800 Vibrations per hour)

· Price: around 350 USD (bracelet version)

Known issues:

· Short crown guard in comparison to the gen (minor)

· End links have their 2 mid lines not flat like gen or like bracelet, they are still rounded (like a half pipe), should be flat like on the bracelet.

· Lume color (some people claim the lume color to be yellowish/greenish instead of being pure white. In my personal opinion its not a flaw, cause it really depends on the lightning very much, not to mention that charged lume changes color. Ive seen some gen watches with the same lume.

· Blue model color is a little off

· In my opinion grey dial needs a little more visible brushing

Summary:

All case dimensions are correct (or if 0,3 mm is a flaw for you – almost correct). All the issues with the V1 were corrected with the V2 - pearl, bracelet, black balance wheel. The bezel is great, the crystal AR is great. Movement is reliable and easy to fix if something goes wrong. The engravings on the dial are correct (but sometimes it happens that they have sharp edges, putting attention to this point is needed during the QC, especially blue and grey dials)

Overall It’s a great replica out of the box!

BEST current option is to get ZF watch (due to the correct crown guards shape + correct balance regulator pin on the movement) and an ORF bracelet (due to correct end links shape)

2. 2019 Seamaster Ceramic bezel Titanium case

Gen Specs:

· Width 43,5 mm

· Lug width 21 mm

· Thickness 15 mm (I actually had to call my AD and ask him to source this info for me, cause they do not have that watch at stock)

· Movement: In-house Caliber 8806, METAS-certified

· Frequency: 3.5 Hz (25,200 vph)

· Retail price: around 8100 USD

2019 VSF Seamaster Diver Titanium V2 Specs:

· Width 43,5 mm

· Lug width 21 mm

· Thickness 14,5 mm

· Movement: Asian ETA 2824 decorated to Omega 8806 Caliber

· Frequency: 4 Hz (28,800 Vibrations per hour)

· Price: around 410 USD

General info:

Main differences from a regular model are case dimensions, material, no DW, dial is made in a opposite way (its matte black with glossy waves)

Flaws I can see:

· Bezel dots look flat on VSF (Gen seems to have some depth)

· Pearl seems to be too deep on VSF

· Same issue with the crown guard being a little shorter (minor in my opinion)

Summary:

I think its still a great rep, all the flows are really minor.

3. Seamaster 300 "Spectre" Limited Edition

Gen Specs:

· Limited series - 7007 pieces

· Width 41 mm,

· Lug width 21 mm

· Thickness 14,8 mm

· Movement: In-house Caliber 8400

· Retail price: around 7500 USD

Seamaster 300 "Spectre" Limited Edition VSF V2 Specs:

· Width 41 mm

· Lug width 21 mm

· Thickness 14 mm

· Movement: VSF 8400 Clone movement

· Price: around 370 USD (bracelet version)

Known issues:

· Dial on the version 2 was improved with better matte finish, now it looks similar to gen.

· Bezel teeth are still not improved. They are supposed to be rectangular shape, but VSF's are circular shape.

· The font on the back cap is a little wrong. "Spectre" should have been written in bold font (kind of more dark), same as 007, but it’s written in a regular as all the other words.

· Seconds hand (lollipop one) has a nob on the top of it, instead of being round

· Some people claim bracelet has wrong spacing (I cant judge based on photos) and recommend getting MKF bracelet.

4. Aqua Terra 8500 / 8900 series

Gen 8900 Specs:

· Width 41 mm

· Lug width 20 mm

· Thickness 13,6 mm

· Movement: In-house Caliber 8900, Co-axial

· Frequency: 3.5 Hz (25,200 vph)

· Retail price: around 5700 USD

VSF Aqua Terra 8900 Specs:

· Width 41 mm

· Lug width 20 mm

· Thickness 13 mm

· Movement: VSF 8900 clone movement

· Frequency: 4 Hz (28,800 Vibrations per hour)

· Price: around 380 USD (bracelet version)

Short comparison (based on owning both gen and rep):

· The dial looks absolutely perfect (even considering that my gen is another color, ive tried gen with the same white/orange) at my AD and I consider it "1:1"), it reflects light and changes color same as gen.

· All size dimensions and finishing are right. That 0,6mm thickness difference does not feel on the wrist at all.

· The weight is right. At least they do feel the same in hands. The bracelet is same light as on gen.

· You can actually see the difference in vph when you know its there and your seconds hands are aligned on both watches (it looks like 40 fps with 60 - smth like that, hard to describe)

· The main difference I found is the bracelet feel, it needs an oil bath for sure (mine got it, now its better)

· Clasp is a little loose, it does not feel on the wrist unless you actually tap on it.

· Also the closest colors are black and white, blue seems to have some purple shade in it (gen does not have it).

· Some people claim that the grey dial DW color is wrong (i went to my AD specifically to check that aspect, IMO it is fine)

Gen 8500 specs:

· Width 41,5 mm

· Lug width 20 mm

· Thickness 12,8 (13) mm

· Movement: In-house Caliber 8500, Co-axial

· Frequency: 3.5 Hz (25,200 vph)

· Retail price: around 6000 USD

VSF Aqua Terra 8500 Specs:

· Width 41 mm

· Lug width 20 mm

· Thickness 12 mm

· Movement: VSF 8500 clone movement

· Frequency: 4 Hz (28,800 Vibrations per hour)

· Price: around 340 USD (bracelet version)

General info:

Main differences with AT 8900

· Size is a little different

· DW is at 3 marker on 8500 and at 6 at 8900

· Bracelet links are turned upside down on the newer 8900 (links are trapezoids, AT 8900 braclet has its links wide side up and 8500 wide side down)

· Different clasp design

Known issues:

· Blue dial is wrong color (VSF did not nail the blue color at all their reps) Black and white are really good.

· Thickness (just a little)

· Same situation with frequency

· Some people claim the bracelet a little thinner (controversial, did not find any confirmation)

Summary:

Both 8500 and 8900 models are really well repped by VSF. I did not find any info stating that VSF clone movements failed (both movements are available more than for a year), my watch smth also confirmed that the movement is pretty solid. So it will more depend on what design you prefer. Especially if you will choose black or white color.

Bonus

Updated VSF AT Spectre Gauss 15007 V2:

· New updated dial has its texture really well done (blue color is also correct), may be the ovals need to be a little more smooth - minor

· Rotor is well decorated (same 3D shape as gen)

Summury:

It absolutely is a winner in comparison with KW (with flat dial and flat rotor) version and a good rep to get.

5. De Ville Hour Vision

Gen Specs:

· Width 41 mm

· Lug width 20 mm

· Thickness 13 mm

· Movement: In-house Caliber 8500, co-axial

· Frequency: 3.5 Hz (25,200 vph)

· Retail price: around 7700 USD

VSF De Ville Hour Vision 41 8500 Specs:

· Width 41 mm

· Lug width 20 mm

· Thickness 13,8 mm

· Movement: VSF 8500 clone movement

· Frequency: 4 Hz (28,800 Vibrations per hour)

· Price: around 438 USD (leather strap version)

The actual comparison found here

Issues found:

· The dial circles surrounding the dial are wrong shape (they have to be engraved a little under the angle to the center of the dial).

· Those circles should have smooth angles (like a pipe) and VSF has them like rectangles.

· The DW window metal surrounding should go down flat till the actual DW (VSF one is not that deep and flat)

· The metal markers on the gen have a big angle on the top of them (while VSF ones are almost flat)

Summary:

Overall they nailed colors really good. Even the blue one. Case shape looks pretty good also. Dial and DW need improvements

6. De Ville Prestige (including Orbis)

Gen Specs:

· Width 39,5 mm

· Lug width 20 mm

· Thickness 10 mm

· Movement: In-house Caliber 2500, co-axial (its an ETA 2892-2 based movement with added co-axial escapement)

· The watch actually comes in A, B, C and D. AFAIK, C and D are 25,200 VPH while the A and B are 28,800 VPH.

· Retail price: around 3900 USD

MKF De Ville Prestige Specs:

· Width 39,5 mm

· Lug width 20 mm

· Thickness 10 mm

· Movement: Asian Clone ETA 2824-2

· Frequency: 4 Hz (28,800 Vibrations per hour)

· Price: around 270 USD

MKF De Ville Prestige issues:

· Overall the dial is pretty good (however the white color seems a little off under some lightning)

· DW font is a little off (smaller than gen)

· Logo on the clasp looks bigger on MKF than on the gen

· Caseback engravings are deeper and wider on gen.

Summary:

Cant say why it is listed in the NWBIG list, but to my eye it should not be there (at least for now), I mean it’s a good rep, but some work still have to be done (pretty easy work).

RXW De Ville Prestige Orbis Specs:

· Width 39,5 mm

· Lug width 20 mm

· Thickness 10 mm

· Movement: Asian clone ETA 2892

· Frequency: 4 Hz (28,800 Vibrations per hour)

· Price: around 290 USD

RXW De Ville Prestige Orbis issues:

· Leather strap color is too light blue comparing to gen

· Date font misalignments

Summary:

Overall it’s a very decent rep. But changing strap to gen is recommended. Also I recommend asking your TD to send you some more photos of DW with different numbers during QC process.

7. Constellation

Gen Specs:

· Width 38 mm

· Lug width 25 mm

· Thickness 13 mm

· Movement: In-house Caliber 8500, co-axial

· Frequency: 3.5 Hz (25,200 vph)

· Retail price: around 5900 USD

VSF Constellation 38 8500 Specs:

· Width 38 mm

· Lug width 25 mm

· Thickness 13 mm

· Movement: VSF 8500 clone movement

· Frequency: 4 Hz (28,800 Vibrations per hour)

· Price: around 390 USD

Issues found:

· Textured dial models have their texture pretty close, but still lacking the wave texture on the rhombus top right side (except that, they are pretty decent)

· Some colors of dials on VSF are lacking all the brushing, they just have a matte finished dial, when gen has brushed finish centered at the star on the dial. For example black dial lacks it, and brown has it right. I find this strange, but at least it looks like that now. And it’s a major flaw

· Also they have the same flow as the De Ville Hour Vision - The DW window metal surrounding should go down flat till the actual DW (VSF one is not that deep and flat), it’s a ladder shape, but needs to be flat and deep sitting

Summary:

Since those models are not that popular as some others, I do not really think we will ever get some improvements. And considering that even gens are not so popular in a wild, it will be hard to spot those imperfections. If you like it, you can go for it. I also contacted one TD for providing me some more info about some flat dials, cause its really hard to spot some things on the photos.

Source

Guide to Known Clasp Codes for Rolex

93150 – Submariner – Non SEL Stainless Steel Oyster bracelet with fliplock clasp:

D12 – Raffles – stamped 62523H 18 – Bracelet stamped 70216 – Endlinks stamped 455b
MA11 – Yuki – stamped 93250 – Bracelet stamped 93250 – Endlinks stamped 448b.
Z10? – JKF/Cartel – stamped 76753? – Bracelet stamped 93150 – Endlinks stamped 580.

93250 – Submariner – SEL Stainless Steel Oyster bracelet with fliplock clasp:

EO6 – JF – stamped 93250 – SEL engraved EO 93250.
EO6 – TC V1 – stamped 93250 – SEL engraved EO 93250.
DE6 – TC V2/WM9 – stamped 93250 – SEL engraved EO 93250.
PJ4 – TC V5 – stamped 93250 – No engraving to SEL.
PJ4 – TC V6 – stamped 93250 – ??
PJ4 – TC V7 – stamped 93250 – No
DE6 – BP – stamped 93250.
CL1 – Sean – stamped 93250 – ??
CL1 – TW Best – stamped 93250 – SEL engraved AD 93288. (Being sold by Detroit Watch Works as genuine. Although their SEL engravings show AD 93250. See here:

https://forum.replica-watch.info/thr…-works.405198/

)
CL10 – ARF – stamped 93253 – SEL engraved EO 93250 – *904L

93160 – Sea-Dweller – SEL Stainless Steel Oyster bracelet with fliplock clasp:

OP10 – BP – stamped 93160A – SEL engraved EO 93160A
EO10 – TC – stamped 93160A – SEL engraved EO 93160A

93253 – Submariner – SEL Bi-Metal Oyster bracelet with fliplock clasp:

CL1 – MBW – stamped 93250 – Bracelet stamped 93250.
OP3 – WM9 – stamped 93253 – Bracelet not stamped – SEL engraved 93253 (Wrapped)
OP10 – BP – stamped 93160A – Bracelet not stamped.
?? – Sean – stamped 93150 – Bracelet stamped 93250 – SEL engraved CL 93250 & 16613. (Wrapped)
1LD – CF bluesy – SEL engraved ??
1RD – VSF bluesy- SEL engraved ??
SI9 – VSF YG – SEL engraved ??

97200 – Submariner – SEL Stainless Steel Oyster with Glidelock Clasp:

PJ3 – NOOB V1 2014/BP/REGMARINER – SEL engraved ??
2VU – NOOB V2 to V5 – SEL engraved RS 97200
1FY – NOOB V6S – SEL engraved G3Z 97200
ST9 – NOOB V7 – SEL engraved 80K 97200
ST9 – NOOB V7 – SEL engraved RS 97200
ST9 – NOOB V8 – SEL engraved RS 97200
ST9 – NOOB V9 – SEL engraved 80K 97200 – *904L
ST9 – NOOB V10 – SEL engraved G3Z 97200 – *904L
T1G – NOOB V10 – SEL engraved G3Z 97200 – *904L
ST9 – NAIL – SEL engraved 6YZ 97203 – *904L
ST9 – VRF – SEL engraved RS 97200 –
J9K – VRF MAX – SEL engraved ?? 97200 – *904L
ST9 – BP – SEL engraved RS 97200
PJ3 – BP – SEL engraved ??
6YZ – BP V2/GM Factory – SEL engraved ??
Y8C – ARF V1 – SEL engraved 590 97200
E5N – ARF V1 & V2 – SEL engraved 5VM 97200 – *904L
X7F – LF – SEL engraved 5WD 97200
PJ3 – JF V1 – SEL engraved ??
PJ3 – REGMARINER – SEL engraved ??
X0P – JF V2 – SEL engraved 590
ST9 – DJF – SEL engraved ?? – *904L
0HA – DJF – SEL engraved T4J 97200- *904L
6YZ – GMF – SEL engraved 6YZ 97203 – *904L
M7J – EXF – SEL engraved ??
7KY – ORF – SEL engraved ?? – *904L
C4R – ZZF V2 – SEL engraved P5M 97200 – *904L
C4R – ZZF V2S – SEL engraved RS 97200 – *904L
7QJ – RXF/XF – SEL engraved T2A 97200 – *904L
1NQ – EWF 41 mm – SEL engraved ?? 316L
UTN – EWF 40 mm – SEL engraved ?? 316L
1LD – CF Date / No Date – SEL engraved ?? 904L
H7Z – VSF Starbucks & Cookiemonster – SEL engraved ?? 904L
7GJ – VSF Date / No Date 40 mm – SEL engraved ?? 904L
H7Z – VSF 41 mm – SEL engraved ?? 904L
1LQ – VSF Date 41 mm Rehaut: 2R… – SEL engraved ?? 904L

6SH / 7GJ – VSF No Date 40 mm – SEL engraved ?? 904L

T1G – VRF Andrea Pirlo No Date 40 mm – SEL engraved “??” 904L

1NQ – GD Factory (low-tier) selled as VSF be aware!

97220 – SD43 – SEL Stainless Steel Oyster with Fliplock Clasp:

453 – VRF – SEL engraved H4Y 97220
4RL – ARF – SEL engraved C4R 97220
4RL – ARF V3 – SEL engraved C4R 97220 – *904
C4R – Noob – SEL engraved ??
C4R – NOOB V2 – SEL engraved 0NW 97220 – *904
453 – GMF – SEL engraved H4Y 97220 – *904

98210 – DSSD – SEL Stainless Steel Oyster with Fliplock Clasp:

T4J – BP V2 – SEL engraved ??
Z6Y – ARF V2 – SEL engraved D2Y 98210 – *904

98220 – DSSD – SEL Stainless Steel Oyster with Fliplock Clasp:

T1U – ARF – SEL engraved 8UF 98220 – *904

78200 – GMT – SEL Stainless Steel Oyster polished centre links with Fliplock Clasp:

OP8 – Noob V2 – engraved 15/423 – SEL engraved OP 78200
5NF – Noob V7 – SEL engraved ??
5NF – Noob V8 – SEL engraved ??
71H – Noob CHS – SEL engraved ??
Y8C – JF v2 – SEL engraved ??
PJ1 – BP – SEL engraved ??
0HA – DJF – SEL engraved 6GF78200 – *904
T1G – Noob V9 – SEL engraved 6GF 78200 – *904
T1G – Noob V10 – SEL engraved ?? 78200 – *904
6MW – VRF 3186 Clone – SEL engraved 89K 97200 – *904
P3L – ARF 3186 clone – SEL engraved P3L 78200 – *904
5XZ – GMF – SEL engraved ?? 78200 – *904
CF Oyster & Jubilee – SEL engraved “??” 904L

69200 – GMT – SEL Stainless Steel Jubilee Fliplock Clasp:

6LX – DJF – SEL engraved A3W 62611 – *904
6MW – GMF – SEL engraved K8P 69200 – *904
6MW- BP – SEL engraved K8P 69200
6MW- Noob – SEL engraved K8P 69200 – *904
6MW- Noob – SEL engraved 1LD 69200 – *904
6MW – VRF – SEL engraved 1LD 69200 – *904

97203 – Submariner – SEL Bi-Metal Oyster with Glidelock Clasp:

Y8C – JF – SEL engraved 469 97203
6YZ – VRF – SEL engraved ??
2VU – Noob – SEL engraved PJ 97203 (Wrapped)
6YZ – BP- SEL engraved ?? (Wrapped)

78590 – Daytona – SEL Stainless Steel Oyster with Fliplock Clasp:

7CD – ARF – SEL engraved 9US 78590 – *904
5NF – Noob – SEL engraved ??
X0P – JF 7750 – SEL engraved ??
Y8C – JF v1- SEL engraved ??
X0P – JF – SEL engraved ??
7GT – BP v2 – SEL engraved ??
Y8C – JF v2 – SEL engraved E0 78493
OP8 – Phong – Clasp engraved 15/423 – SEL engraved AS 78490
Z1H – Noob 4130 clone – SEL engraved ??
T1G – Noob 4130 V2 – SEL engraved Z6S 78590 – *904
5NF – JH – SEL engraved C1Z 78590
7CD – GMF – SEL engraved ?? – *904

63600 – Datejust – SEL Stainless Steel Super Jubilee bracelet:

COC – ARF – SEL engraved 931 63600
CL5 – BP – Clasp engraved 72200 – SEL engraved ??
K6G – VSF 41 mm SS – SEL engraved ??

72600 – Datejust – SEL Stainless Steel Oyster bracelet with Oysterclasp:

7UM – ARF – SEL engraved UOP 72600A
3NY – BP – SEL engraved ??
M8N – EWF 36 mm – SEL engraved ??
7UL – VSF 41 mm SS – SEL engraved ??

70400 – Oyster Perpetual – SEL Stainless Steel Oyster bracelet with Oysterclasp:

7UM – JF – SEL engraved 7GT 70400

Below are some models which I added:

Day-Date 36/40 – Clasp-Codes Stainless Steel plated / non-plated with presidential Bracelet:

7GT – BP 36 & 40mm 316L – SEL engraved “??”
7GT – GMF 904L – SEL engraved “??”
2EM – EWF – SEL engraved “??”
7GT – Noob – SEL engraved “??”

Yacht-Master I 37-/ 40-/ 42 mm -Stainless Steel plated / non-plated with Oysterclasp:

W5T – 226659 VSF 42 mm Rubber/SS – SEL engraved “??”
5XZ – 226659 GMF 42 mm Rubber/SS – SEL engraved “??”
9AX – 268622 ARF 37 mm SS – SEL engraved “??”
7CD – 116622 ARF 40 mm SS – SEL engraved “??”
3DD – 116622 Noob 40 mm SS – SEL engraved “??”
5XZ – 116622 BP 40 mm SS – SEL engraved “??”
7CD – 116621 ARF 40 mm RG – SEL engraved “??”
6OD – 116655 ARF 40 mm Rubber/RG – SEL engraved “??”
138 – 116655 Noob 40 mm Rubber/RG – SEL engraved “??”

BECAUSE THERE ARE ACTUALLY FAKES OF FAKES I WILL MENTION THEM ABOVE:

1LD – 11661X FAKE CLEAN SUBMARINERS – rehaut engraved “U9N5” (here is important, that the fake CF has 1LD smaller than “Steelinox”)t
he stickers are not that clean than the real ones.

FAKE CLEAN CAT

and

FAKE CLEAN MONKEY

and

THIS

2R2 – 126619LB FAKE VSF COOKIEMONSTER –

/u/pmtu´s mentioned thread

and

Guide to distinguish a real CF by /u/Linxujia Source

List of Trusted Watchsmiths

The Rules as follows for the process of becoming a watchsmith, and what we hold as an agreement with each and every watchsmith that becomes trusted.

1 – ID verification
2 – Sticked post on your own profile stating services that watchsmith provides.
3 – Information about the movements watchsmith has experience servicing.
4 – Rough public estimate of the cost of service (price range).
5 – After becoming a TWS (Trusted Watchsmith) At least 2 monthly contributions to the subreddit that are educational in nature.
6 – Warranty on all the services provided by the watchsmith (water damage is not included)
7 – Provide proof (photos) to the client about the services performed
8 – Open a sticky for customers feedback
9 – Before becoming a trusted watchsmith you will be vetted by mod’s and Watchsmiths alike.

Source

TRUSTED WATCHSMITHS *This will be updated as more become available.

CONUS:

EU:

u/Nikz19_WatchService

u/Noleex_The_Modder

UK:

u/UnderTheDial

Source

Beginner’s Guide to Clone Movements in Rolex Replica Watches

When buying a high end replica watch, it’s important to consider both what’s on the outside and what’s on the inside. The factories in China have invested millions of dollars in re-producing exact copies of various Swiss watch movements from ETA, and in-house movements from Rolex, AP, Patek Philippe, and Richard Mille. The accuracy of the replication varies, as does their reliability of these movements. In this guide I hope to be able to give you a basic understanding of which mechanical movements are good, which ones are ok, and which ones to avoid, and importantly, how to tell the various movements apart, since the information listed on Trusted Dealer (TD) websites in the descriptions isn’t terribly accurate.

Rolex has by far the largest market share of all replica watches. As such, it’s not surprising that there are a plethora of clone movements available for the popular Rolex models.

Naming Conventions

Watch movements are often labeled with one or two letters followed by the Rolex movement number that they're a clone of. For example, the VS3235 is a clone of the Rolex 3235 movement. The prefix letters are important, but aren't assigned based on any consistent principals. Sometimes the letters are applied based on which watch factory exclusively uses the movement (e.g. VSF is the exclusive user of VS3235 movements, so that's where the "VS" part of the movement name comes from). But this pattern isn't universal, currently Clean Factory is the exclusive user of the new DD3285 movement, but that movement gets its DD prefix from "Dandong movement factory", the maker of the movement. In theory it would be best to use the movement factory names as the prefixes since movements like the VR3235 get the "VR" from the fact that they were initially used by the watch factory VRF, but are now used by many factories, so the VR3235 would be better named the SH3235 since it is made by the Shanghai movement factory. However, there are in fact two movement factories in Shanghai. Further complicating naming conventions is the fact that sometimes the letters "A" or "SA" are used as prefixes to simply mean "Asian" or "Super Asian".

In conclusion:

Rep movement naming conventions are a mess.
Don't trust what is written on TD websites.
Learn to identify movements based on the descriptions and labeled images below.

40mm Submariner (1166XX and 114060)

For 40mm submariners (i.e. those with reference number 1166XX), there are six options in order of quality:

VS3135 (date version), VS3130 (no-date version)
VR3135 (date version), VR3130 (no-date version)
SH3135 (date version), SH3130 / AR3130 (no-date version)
SA3135 (date version), SA3130 (non-date version)
A2824
A2836

Genuine Rolex Caliber 3135

For reference here’s the genuine Rolex caliber 3135. Note how there is only one arm (the beat adjustor -- red arrow) on the balance bridge of the genuine movement. This is because the genuine movement has a “free sprung” balance. That means on the genuine movement the speed of the movement is regulated (i.e. adjusting how fast or slow the movement runs) by adjusting the moment of inertia of the balance wheel via tiny weighted screws on the rim of the wheel (green arrows). On all replica movements, regulation is done via a regulation arm that can be adjusted to lengthen or shorten the effective length of the hairspring. That’s why you see only one arm on the genuine movement, but two arms on the replica movements. Also note that the 3135 movement's rotor does NOT run on ball bearings (blue arrow).

Error creating thumbnail: Unable to save thumbnail to destination

VS3135 & VS3130

This is an excellent movement. The part finishing quality and engraving is good. The hairspring mounted clockwise. This is the best clone of the Rolex 3135 movement. Note, there is a VS3130 version of this movement which is used on the no-date 40mm VSF subs (ref number 114060). The VS3130 is of equal quality to the VS3135, it is the best option for a no-date 40mm sub.

For identification against the genuine and other clone 3135 movements, note the position of the beat adjustor arm (red arrow) and the regulator arm (green arrow). Note the type and quality of the balance shock absorber setting (blue arrow). Note that there's a difference between the VS3135 used in VSF watches and the VS3135 used in CF watches: the version used in CF watches doesn't have a serial number engraved into the main plate.

This movement used to be exclusive to VS Factory (VSF), but is now widely available and replacements are available on eBay and AliExpress for around $130 USD.

Error creating thumbnail: Unable to save thumbnail to destination

VR3135 & VR3130

This is another good option for 40mm submariners. The part finishing and engraving is good. This is the second best clone of the 3135 movement. Note, there is a no-date version of the VR3135 called the VR3130. The VR3130 is a good quality no-date movement, second only to the VS3130. It's worth knowing that unlike the VS3135 (and gen) movement, the VR3135 doesn't have a shock setting for the escape wheel; this will reduce the shock resistance of the movement and is one of the reasons that the VS3135 is considered a better choice over the vr3135.

For identification of the VR3135 movement there is an easy way to tell it apart from the VS3135, on the VR3135 the hairspring is mounted counter-clockwise (purple arrow). The beat adjustor (red arrow) also has a black dot on it. But the regulator arm (green arrow) and the shock setting (blue arrow) look very similar to the vs3135.

Error creating thumbnail: Unable to save thumbnail to destination

Please note that there is a second version of the vr3135 which has a fake beat adjustor (blue arrow), and has the real beat adjustor (red arrow) and regulator arm (green arrow) pointing inwards. This is a style that is also seen in the VR3235 movement.

Error creating thumbnail: Unable to save thumbnail to destination

This movement is used in 40mm submariners from many replica watch factories. It is also available for purchase on eBay and AliExpress as a replacement for a broken movement for around $80 USD.

SH3135 & SH3130 (AR3130)

This movement has very low quality finishing. The hairpspring is mounted counter clockwise. Avoid this movement if possible. There is also a no-date version of this movement called the SH3130 (or sometimes the AR3130) which is of similarly poor quality. Avoid both the SH3135 and SH3130 (AR3130).

For identification purposes, not the style of the beat adjustor arm with the screw on the side (red arrow), the regulator arm (green arrow), and the style steel (not brass) cup for the shock setting (blue arrow).

Error creating thumbnail: Unable to save thumbnail to destination

SA3135 & SA3130

This movement has reasonable quality of part finishing, but poor quality engraving. The hairspring mounted clockwise. Go with the VR or VS movement if you have the choice or budget. There is a no-date version of this movement called the SA3130, which is of similar quality to the SA3135; as such a better choice for a no-date 40mm submariner is the VS3130 or VR3130.

For identification purposes note the round head on the beat adjustor arm (red arrow), the style of the regulator arm (green arrow), and the style and metal (steel) of the shock setting (blue arrow).

Error creating thumbnail: Unable to save thumbnail to destination

A2824

This isn’t a clone of a Rolex movement, rather it is an Asian clone of an ETA 2824 movement. There are quite a few variations on this movement since it has been around for decades and every movement factory in China has a clone version of it. This movement is reliable and easy to service and get replacement parts for. However, it doesn’t even remotely resemble what you’d find inside a Rolex. If you don’t care about what movement powers your rep, this isn’t a bad option. Complete Clone 2824 movements can be purchased on eBay and AliExpress for $20 to $50 USD. A genuine Swiss ETA 2824 will cost over $200 USD and will be a simple drop-in replacement for an Asian 2824.

For identification purposes, note the position of the beat adjustor (red arrow), the regulator arm (dark green arrow), the fine tuning rate adjustor (light green arrow), the shock absorber (blue arrow, NB: there are many different styles of shock absorbers on different clones of the eta 2824, the one in the picture is a lower end one), and finally note that the rotor runs on ball bearings (orange arrow).

Error creating thumbnail: Unable to save thumbnail to destination

A2836

This is another clone of an ETA movement that is never found inside a real Rolex. This movement is also reliable and easy to service. Some people prefer these movements since they are easy to fix or replace and “nobody can see inside my rep submariner”... the functions at the crown i.e. the direction you have to twist to set the date / time, will not necessarily be the same as on a cloned movement. Also this is a strange choice for a movement in a submariner since it has the functionality for both a day and date function, so it is more often seen in reps of the Rolex DayDate.

For identification purposes, this movement looks the same as the 2824 from the balance side, so there really aren't any easy ways to differentiate the two without looking at the keyless works or dial side of the movement. The pic below is here more for reference and the coloured arrows point to the same features noted in the description of the 2824 above.

Error creating thumbnail: Unable to save thumbnail to destination

41mm Submariners (1266XX) and 36mm and 41mm Datejust

There are several clones of the Rolex 3235 movement which appear in 41mm Subs, and 36mm & 41mm Datejusts. Please note: There are two version of the genuine Rolex 3235 movement which have slightly different sized date wheels. This is because the date window on the dial of the 41mm DJ is further out than the date window on the 41mm Submariner. If you are buying a replacement 3235 movement, be sure you get the correct version for your watch.

It’s worth noting that there are some 36mm Datejusts that use the VR3235 movement (e.g. the ones from Clean Factory), and the ones from VS Factory (VSF) use the excellent VS3235 movement. However, the majority of non CF or VSF 36mm DJs use an ETA clone. Unfortunately, the 3235 movement is too big for the 31mm Datejust case, so all replica 31mm Datejusts use lower end Asian clones of ETA movements. This is just a function of market pressure: there’s not a lot of demand for replica watches in lady sizes.

Genuine Rolex Caliber 3235

The genuine Rolex caliber 3235 is a relatively new movement with an astonishing 72 hour power reserve. Just like the genuine 3135 the genuine 3235 doesn’t have a regulation arm on the balance bridge (there is only a beat adjustor arm -- red arrow) since the movement is regulated by adjusting micro screw weights on the rim of the balance wheel (green arrows). All the replica 3235 movements have a regulation arm, so you’ll always see two arms on the rep movement balance bridges. Also note that the automatic rotor runs on ball bearings (blue arrow). Furthermore, the escape wheel on the gen movement is skeletonized (orange arrow), whereas it is solid on all the replicas of this movement.

Error creating thumbnail: Unable to save thumbnail to destination

VS3235

This is an incredible movement that is currently only available in VS Factory (VSF) subs and DJs. The movement has an amazing 70+ hour power reserve and is part compatible with the genuine Rolex movement. This means that it’s possible to swap gen parts into this movement to improve it. A common part swap on this movement is to replace the balance complete, pallet fork, and escape wheel with gen parts. With those parts swapped, the movement is virtually indistinguishable from the genuine caliber.

For identifications of this movement, look at the position of the two arms coming off the balance bridge (beat adjustor -- red arrow, and regulator arm -- green arrow): on the VS movement they face outwards. Also note the paraflex shock setting spring (blue arrow). The paraflex shock setting on the VS3235 movement is the actual functional shock setting, unlike on the VR3235 where the paraflex shock setting is simply a decoration plate.

Note: there is currently no non-date version of the VS3235, that is a "VS3230" movement doesn't exist (as of March 2023). The best option for a no-date 41mm submariner is the VR3230 movement (see below).

Also note that is is not possible to buy this movement on eBay or AliExpress. However, if you have a VSF sub or dj with a broken movement, there are many rep-friendly watch smiths who will be happy to swap in a VR3235 movement for you and take the broken VS3235 off your hands for spare parts.

Error creating thumbnail: Unable to save thumbnail to destination

VR3235

This is a very common movement that is used in Subs and DJs from many different factories. This movement is technically not a clone but more of a hybrid between a 3135 and 3235 movement. This movement is reliable, although it doesn’t have the same power reserve of the VS3235, at only around 40 hours. While spare parts for this movement can be hard to find, a replacement movement is only around $100 USD on AliExpress, so it’s often more economical to replace the movement with a new one rather than service an old one.

This movement is easy to identify because it has a “fake” beat adjuster arm pointing outwards from the balance bridge (blue arrow), but the two functional arms (beat adjustor -- red arrow, and regulator arm -- green arrow) are hidden underneath the balance bridge and face inwards. Also of note, the end-shake adjustment screw on the balance bridge (purple arrow) isn’t functional, so adjusting the end-shake of the balance needs to be done with foil shims. The end shake adjustment screw simply secures a decoration plate that houses the fake paraflex shock setting (orange arrow), there is a real shock setting under this decoration plate.

Note: there is a no-date version of this movement called the VR3230 which is used on Clean Factory (CF) no-date 41mm submariners (as of August 2022). The VR3230 is the best option for a clone movement in a no-date 41mm submariner.

Error creating thumbnail: Unable to save thumbnail to destination

SA3235

This movement appears in some DJ41s and DJ36s. This is not a great movement, and should be avoided. The movement is decorated with poor quality plates. In the images it’s possible to see paint flaking off of the “reversing wheels” of the automatic model.

This movement can easily be identified by the decoration at the center of the rotor that is trying to make it look like the rotor runs on ball bearings like the gen 3235 (red arrow). Furthermore, the shock setting spring (blue arrow) on the balance bridge is a three sided closed spring vs. the paraflex springs that are present on the gen, VS and VR (although on the VR the paraflex spring is part of a decoration plate, and the real shock setting can be found underneath). This is a movement to avoid.

Error creating thumbnail: Unable to save thumbnail to destination

GMT Movements

For GMT movements, there are movements that have the correct hand stack (CHS) and incorrect hand stack (ICHS) on modern (6-digit) GMT models (1167XX, and 1267XX). Correct hand stack means that the hour hand is on the bottom, the GMT hand is next, then the minute hand, and the seconds hand is on top. Incorrect Hand Stack means that the GMT hand is on the bottom, the hour hand is on top of the GMT hand, then the minute hand, and the seconds hand on top.

Details on each movement are provided below, but this graphic (by @KJ2020) is a shortcut to helping ID each of the 318X series movements movements. Note: There are two "true" 3285 clone movements which are (as of summer 2023) starting to see widespread adoption by rep factories. With these two new 3285 movements (see bottom of the GMT movement section) hopefully the days of trying to figure out exactly which GMT movement is the watch you're buying (to avoid the time-bomb movements) will be a thing of the past.

Hat tip to RWI's Gandalf the Grey of GMT movements: @KJ2020 who helped me correctly identify each of the myriad clone GMT movements -- Thank you for helping me get this right.

Error creating thumbnail: Unable to save thumbnail to destination

VR3186 (Correct Hand Stack)

This is a good movement. The VR3186 is reliable and has an hour hand jumping mechanism is strong. The VR3186 is sometimes engraved with the number 3285 (black arrow), but it’s the same movement. Below are two pictures showing the same movement with different engraving. Note that this movement is easily identifiable by the position of the arms on the balance bridge: both the beat adjuster (red arrow) and regulator arm (green arrow) point inwards and there’s a fake beat adjuster arm (blue arrow) facing outwards. Also note that a true 3285 clone movement (see below) has a rotor that runs on ball bearings not a jewel pivot (purple arrow) and has a paraflex shock setting (orange arrow) not a kif shock setting.

Error creating thumbnail: Unable to save thumbnail to destination

Note that there are VR3186 movements which have been engraved with the numbers "3285" (black arrow) but they are VR3186 in every other way.

Error creating thumbnail: Unable to save thumbnail to destination

Also note that there is an older version of the VR3186 (sometimes called the VR3185 or VR3186 v1) which has the beat adjustor arm and regulator arm facing outwards. This version of the movement can be identified by inspecting the balance bridge: the beat adjustor which has the hairspring screw pointing out the end of the arm (red arrow) and regulator arm (green arrow) point outwards (unlike the newer VR3186). Also, the shock setting has a brass cup (blue arrow).

Error creating thumbnail: Unable to save thumbnail to destination

SH3186 (Correct Hand Stack)

This is a time-bomb movement that should be avoided. The hour hand jumping mechanism is weak on this movement and is prone to breaking. Furthermore, the hour hand jumping mechanism isn’t gen-spec, so it can’t be repaired with gen parts. This movement can be identified again by the position of the beat adjustor arm (red arrow, note the position of the hairspring screw on the side of the beat adjustor arm unlike on the old version of the VR3186 where this screw is on the end of the arm), and the regulator arm (green arrow) on the balance bridge. Also, unlike the old version of the VR3186, the SH3186 has a steel cup for the balance bridge shock setting (blue arrow).

Error creating thumbnail: Unable to save thumbnail to destination

SA3186 (Correct Hand Stack)

This is another time-bomb movement. Like the SH3186 this movement has a weak hour hand jumping mechanism and should be avoided. This movement is easy to identify because unlike all the other CHS GMT movement it has its hairspring mounted clockwise -- this means that the beat adjustor (red arrow), and regulator (green arrow) are reversed compared to the VR3186 and the SH3186. Also, the shock setting of this movement has a steel cup (blue arrow).

Error creating thumbnail: Unable to save thumbnail to destination

SA3285 (Correct Hand Stack)

In 2020, GMF released a movement called the SA3285 which was basically a slightly different version of the SA3186. This movement can be identified by the beat adjustor arm (red arrow), regulator arm (green arrow), and shock setting (orange arrow) that are the same as the SA3186. However, the SA3285 had holes drilled around the rotor mounting (blew arrow) to make it look like the rotor was running on ball bearings like a true 3285 movement (see below). This movement is of similar inferior quality as the SA3186, so it should be avoided.

Error creating thumbnail: Unable to save thumbnail to destination

A3186 (Incorrect Hand Stack)

This isn’t a clone of a rolex movement, but rather a clone of an ETA movement that is decorated to look like a rolex movement. ETA GMT movements are reliable and inexpensive to service and repair, however, the functionality does not match the Rolex GMT calibers. A better option is the VR3186. The movement is easy to identify by the shock setting (red arrow), the ETA style winding works (green arrow), and the ETA style reversing wheels (blue arrow).

Error creating thumbnail: Unable to save thumbnail to destination

A2836 (Incorrect Hand Stack)

It’s unclear why this movement is labeled as an Asian clone of the ETA 2836, since the ETA 2836 is not a GMT movement. It’s more likely that this is a clone of the ETA 2893 movement. Nonetheless, this movement is not going to function like a genuine Rolex GMT movement, and has the wrong hand stack on the dial. A far better option is to go with the VR3186. This movement is easy to identify from the ETA style balance cock assembly (red arrow).

Error creating thumbnail: Unable to save thumbnail to destination

SH3285 aka VR3285 (Correct Hand Stack)

This is a new movement (as of March 2023) which has started to appear in C+ Factory GMTs and Explorer IIs. There is little long term reliability information about this movement, although @CTime posted an excellent photo comparison of the SH3285 with the DD3285 and the Gen 3285. This movement appears to be based on the VR3235 movement (discussed above), as such it is not a true clone but rather a hybrid that has both 31XX style parts and 32XX style parts.

There have been some reliability issues reported with the SH3285 movement. Furthermore, the SH3285 appears to have subtly different sized / position parts compared to both the VR3235 movement (with which it shares its train wheel and escapement design), and the gen/DD3285.

The SH3285 can be easily identified by the position of the beat adjustor (red arrow) and regulator arm (green arrow) which face inwards and the fake beat adjustor arm (blue arrow) which faces outwards. Additionally, the end-shake adjustor screw (purple arrow) is not functional, but simply secures a decoration plate which contains a fake paraflex shock setting (orange arrow). Also, unlike the 3186 movement, the SH3285 movement's rotor runs on ball bearings (pink arrow).

Error creating thumbnail: Unable to save thumbnail to destination

DD3285 aka CF3285 (Correct Hand Stack)

This is a new movement from Dandong movement factory (one of the best rep movement factories in China). This movement will apparently be exclusive to Clean Factory (CF). Based on the photo comparison posted above by @CTime, the DD3285 appears to be based on the excellent VS3235 movement, so it is likely that it will have the long 70 hour power reserve.

This movement can be easily distinguished from the SH3285 above by the position of the beat adjustor arm (red arrow), and regulator arm (green arrow) which both point outwards and are very similar to the VS3235 movement from which the DD3285 is based. Also note the functional paraflex shock setting (purple arrow) and that the rotor runs on ball bearings (blue arrow) unlike clones of the 3186 movement.

Error creating thumbnail: Unable to save thumbnail to destination

DayDate Movements

Prior to September 2023, the only movement available for DayDate movements was the asian clone of the ETA 2836 movement (see above for images of the clone ETA 2824 movement since the 2836 looks the same from the balance side). The ETA clone is reliable and easy to service, however it doesn't operate in the same way as the gen 3255 movement from the crown. As such, for those looking for a closer to gen rep, there has always been a desire for a clone 3255 movement. This wish appears to have been granted in the form of a 3255 clone movement that looks like it is based on the reliable (albeit not a true clone) VR3235 movement from Shanghai movement factory.

VR3255

This movement is new as of September 2023 and has only (so far) appeared in DayDates from EWF. The movement looks like it comes from Shanghai movement factory and appears very similar to the SH3285 (GMT) movement and the VR3235 movement. All of these movements share the same inward facing beat adjustor arm (green arrow) and regulator arm (red arrow), with a fake hairspring stud pointing outwards (blue arrow). This movement also appears to have the same non-functional balance end-shake adjustor (magenta arrow) which doesn't adjust end-shake, but rather simply secures the decoration plate on top of the balance bridge. The movement is identifiable by the 3255 engraving (black arrow). As of this update, there is no information about the reliability of this movement, but we should expect that like most new movements (e.g. the SH3285) it will take a few iterations to work out the bugs.

Error creating thumbnail: Unable to save thumbnail to destination

Daytona Movements

There are two clone 4130 movements: the original Dandong 4130 movement used by Noob (until Noob was shut down in a raid in 2021), and now used by CF, BTF, QF, and "new Noob". But in June 2023 Shanghai Movement factory released a version of the 4130 movement (called the SH4130). These two movements (and the ETA 7750 which is used in lower end Daytona clones) are discussed below.

Dandong 4130 (aka DD4130 or "Noob 4130")

This movement is also known as the Noob4130 / N4130 / Dandong 4130. They are all the same. This movement is one of the highest quality replica movements available. For a long time it was exclusively available to Noob Factory. When Noob was raided and shut down in 2021, this movement disappeared from the rep scene. However, in early 2022 Clean Factory (CF), and then Better Factory (BTF), and Q Factory (QF) started making Daytonas with this movement. Daytonas with this movement are more expensive than Daytonas with a 7750 movement. However, if you care about the reliability and longevity of your rep, go for the DD4130. It’s worth the extra cost.

The DD4130 movement is also compatible with genuine Rolex parts. It’s common to replace the balance-complete, and the chronograph seconds wheel to build a movement that is nearly indistinguishable from the genuine Rolex caliber 4130. For anyone interested in a part by part macro photo comparison between the gen and Dandong 4130 movement, @CTime did the heavy lifting for you.

The DD4130 looks completely different from the 7750, learn to tell the two apart so that you can validate any claims made by a seller. Easy parts to look for when identifying a DD4130 vs. a 7750 are that the DD4130 has three screws securing the rotor (green arrow), a column wheel (red arrow), and a balance bridge (blue arrow) rather than a balance cock.

Error creating thumbnail: Unable to save thumbnail to destination

Shanghai 4130

In June 2023 Shanghai Movement factory released a 4130 clone movement. As of June 2023 we have only seen this movement in Daytona reps from APSF (a factory known for their high end AP reps). There is no reliability information available as of this update (I will update this post when information becomes available). However, for now, there is an easy way to differentiate the SH4130 from the DD4130: The position and style of the beat and regulator arms on the balance bridge. Unlike the DD4130 where the beat and regulator arms point outwards, on the SH4130 the beat adjustor (red arrow) and regulator (green arrow) point inwards. Furthermore, on the SH4130 there is a fake hairspring stud (blue arrow). This style of balance bridge is common on other Shanghai clone movements such as the VR3135, VR3186, and SH/VR3285.

Error creating thumbnail: Unable to save thumbnail to destination

7750

This is an Asian clone of an ETA 7750 movement. The reason that this movement isn’t great for the Daytona is because it is thicker than the 4130 movement, so the movement is often slimmed down (and thus made less reliable) to fit inside a 12.4mm thick Daytona case. Furthermore, the Daytona has its small seconds at 6 o’clock, but this is not the default position for the small seconds complication on the 7750 movement; various additional wheels need to be added to the top of the 7750 movement to get everything into the correct position. This complication adds stress to the movement and reduces reliability. With the clone 4130 widely available, it's a good idea to avoid Daytonas with the 7750 movement.

The 7750 can be identified by the single screw securing the rotor (red arrow), and the balance cock (green arrow) vs. the balance bridge see on the 4130.

Error creating thumbnail: Unable to save thumbnail to destination

Source

Guide to Movements in Audemars Piguet, Patek Philippe & Richard Mille

This guide will be an introduction to the clone movements found in Audemars Piguet (AP), Patek Philippe (PP), and Richard Mille (RM) replicas. Just like with the clone Rolex movements, the clone movements for AP, PP, and RM are of varying quality in terms of how well they replicate the genuine movement in form & function, but also quality. However, unlike Rolex clone movements where there can be multiple different clones of a single movement (e.g. the plethora of Rolex caliber 3135 and 3235 clones), with AP, PP, and RM, there's usually just one clone movement, so I'll try to compare and contrast the clone against the alternative which is often a decorated Japanese Miyota 9015 movement.

Audemars Piguet

The most popular AP replica (by far) is the Royal Oak (RO). There are two replica AP movements, one for the RO 15400: the clone 3120 movement by Z Factory (ZF). And one for the RO 15500: the clone 4302 movement by APS Factory (APSF). The alternative to these cloned movements is the Japanese Miyota 9015 movement.

AP Royal Oak 15400

3120

The clone 3120 movement is found in both the Z Factory (ZF) and APS Factory (APSF) AP RO 15400 replicas watches at present (summer 2022). However, both factories used a decorated Miyota movement several years ago before the clone movement became available. So be careful when buying an AP 15400, just because it’s from ZF or APSF doesn’t necessarily mean that it has a clone movement.

The clone movement can be distinguished from the Miyota by the position of the balance wheel at 8 o’clock vs. 5 o’clock on the Miyota. Furthermore, the Miyota has a non-function shock setting without a spring on the balance bridge, whereas the clone has a functional shock setting on the balance bridge.

Unfortunately, both the clone movement and the Miyota 9015 have a slow date change at midnight, whereas the genuine AP 3120 movement has an instant date change at midnight.

[1]

Clone AP 3120

Miyota 9015

The Miyota 9015 is a reliable workhorse movement, and older / lower end AP 15400 replicas used a decorated version of this movement. However, the clone 3120 movement is reliable and is a more authentic option over the Miyota if you’re looking for a genuine appearance through the transparent caseback.

[2]

Miyota 9015 decorated to look like an AP 3120

AP RO 15500

4302

The clone 4302 movement is new (as of summer 2022), but appears to be an excellent movement. The initial review by a watchsmith at RWI said that the movement is on par with the Noob Daytona 4130 movement (the 4130 Daytona movement is widely considered to be the best clone movement ever made, so this is VERY high praise). Like the genuine AP 4302 movement, the clone features an instant date change at midnight. The quality of this movement makes it the no-brainer choice for an AP 15500.

This movement is used in both the ZF and APSF version of the AP 15500, however, the ZF version has a spelling error in the engraving / printing on the back side of the movement (the word JEWELS is spelled JEWEES on the ZF version as of August 2022). This may be something that gets corrected soon, however, it’s worth checking during QC to ensure this error is not present.

[3]

Clone AP 4302

Miyota 9015

The Miyota is no longer a good choice for the AP 15500 due to the fact that it has a slow date change, and while it is reliable, it is now competing with an extremely high quality replica movement.

[4]

Miyota 9015 decorated to look like an AP 4302

Patek Philippe

There are only two clone movements available for Patek reps, the caliber 324 for the Nautilus 5711 and Aquanaut, and the 240 for the Nautilus 5712. All other Patek reps use a Miyota or another Asian movement.

Nautilus 5711 and Aquanaut 5167

Both the 5711 Nautilus and the 5167 Aquanaut share the same Patek Philippe caliber 324 movement. This movement has been cloned and is available in reps from 3K Factory (3KF). However, older Aquanauts use the Miyota. For the 5711 Nautilus there is a version of the Miyota that has been well decorated and rotated so that the balance wheel appears to be in the correct location compared to the gen 324 movement. However, all of these movements have a slow date change at midnight, whereas the genuine movement has an instant midnight date change.

324

The Clone 324 movement can be found in 3K Factory reps of the Nautilus and Aquanaut. This is a good movement, but doesn’t have a very large power reserve and requires a large amount of winding or rotor spinning (possibly due to non gen-spec gearing in the automatic module). The movement can be identified and differentiated against the rotated Miyota by the functional main train wheels visible above the balance wheel which are not present in the rotated Miyota.

[5]

3KF Clone 324 movement in an Aquanaut

[6]

3KF Clone 324 in a 5711 Nautilus

Miyota 9015

The Miyota 9015 is a common movement that has been discussed above, it is often found in lower end or older Patek reps. It is reliable, easy & cheap to service. It doesn’t have an instant date change at midnight. And it suffers from a loud rotor. This movement is easy to distinguish from the clone 324 because the balance bridge (cock) is anchored on the crown side which is reversed in the clone and gen movement. There are also noticeable differences in the screw and ball bearing assembly of the rotor at the center of the movement. This isn’t a bad movement if you don’t really care about an authentic look, However, given the open caseback on Patek watches, the clone or rotated Miyota are better options.

[7]

Miyota 9015 decorated to look like a PP 324

Rotated Miyota

PP Factory (PPF) has developed a rotated and well decorated Miyota variant that looks more similar to the gen movement than an undecorated Miyota, but is still noticeably a worse imitation than the 3KF clone 324 movement discussed above. This movement is easy to differentiate from the clone 324 movement due to the lack of main train wheels above the balance wheel. Also, the fake “jewels” where the main train wheels should be, are red and the rest of the functional jewels in the movement are purple. The rotated Miyota also doesn’t have its rotor running on ball bearings, whereas the clone and gen both do. The 3KF clone movement is a better option if you want a more gen-like rep.

[8]

Rotated Miyota 9015 decorated to look like a PP 324

Nautilus 5712

The 5712 is a Nautilus with a lot of complications. The gen model features a power reserve indicator, small seconds, date, and moon phase indicator. Furthermore, the genuine Patek 240 caliber features a micro-rotor to keep the movement incredibly thin. With all of this complication it is truly impressive that PP Factory (PPF) has managed to build a fully functional clone movement which has only minor cosmetic differences from the genuine Patek 240 caliber. The clone movement doesn’t appear to be available exclusively from PPF, as it has appeared in 5712 reps from GR Factory (GRF) as of summer 2022.

240

The clone 240 movement is an impressive feat of engineering. This is a thin movement with many complications. This movement is still very new (as of summer 2022), and as such, there is not yet a consensus as to its reliability, although an initial review by a watchsmith on RWI confirmed that the build quality was good, and there were no surprises.

[9]

Clone PP 240 movement

A23J Movement

There is an old version of the 5712 that comes with a decorated generic Asian 23 Jewel movement. This version is much thicker than the gen which makes rep 5712s with this movement 10.5mm thick vs. 8.4mm thick for reps using the clone. Also, this movement doesn't have a functional power reserve indicator. With the availability of the clone 240 movement, this is not a recommended option.

[10]

Miyota 9015 decorated to look like a PP 240

Richard Mille

Richard Mille watches are extremely complicated and use many exotic materials. So far there has only been one attempt at a clone movement for a Richard Mille: a clone movement for the RM 055 by BBR Factory of the RMUL2 movement. Previously all RM055’s used a decorated version of the Seiko NH05A movement.

RM055

RMUL2 Clone

The clone movement is impressive, but flawed and unreliable. This is a movement that should probably be avoided until there is an improvement to its reliability. The movement looks considerably closer to the gen RM movement than the NH05A movement which is used in other RM055 replicas. However, there are obvious flaws, for example the balance wheel shock setting jewel of the clone movement is purple, whereas the gen jewel is clear / white.

More worryingly, there have been many reports of this movement arriving dead after a watch was shipped from a TD to a customer. Additionally, the movement has significant stuttering of the second hand due to backlash between gears.

While this movement is an impressive feat of engineering, this movement is not currently recommended.

[11]

RM 55 clone RMUL2 movement

SEIKO NH05A

The NH05A movement is well decorated and dressed up to look like the gen RM055 movement, but it is obviously not genuine, and that fact is on display due to the open worked design of the RM055 case. This is a reliable movement. However, a gen RM055 is a roughly half million dollar watch, unless you own a Ferrari, nobody will need to look at the movement to know that your RM055 is a rep. If you like RM reps, buy them, wear them, enjoy them, and don't worry about how real or fake the movement looks.

[12]

Seiko NH05A movement decorated to look like an RM movement

Source

Guide to who Makes the Best Ladies Replica Watches

This guide was created to help guide those who are interested in Ladies watches. The factories listed are in order of best to not best, but for many of these there is only one factory making the particular model here.

Note: where it says “unknown factory”, it means a replica exists, but you’ll need to ask your TD with a picture of the watch you’re looking for. Some of these are from smaller factories, with smaller batches, and could be out of stock.

Rolex

Datejust 36mm: GMF, ARF, BPF
Datejust 31mm: GMF, GSF, WF, APS has the new 2022 dials, EWF
Datejust 28mm: GMF, BP, WF, CSF
Daydate 36mm: GMF, BP, EWF
Explorer 36mm: BP, EWF
Oyster Perpetual 36mm: EWF
Oyster Perpetual 34mm: ANF
Yachtmaster 34mm: BP Factory
Pearlmaster 34mm: K6 Factory

Patek Philippe

Nautilus 7118 35mm: 3KF (super rep), PF, MSF
Nautilus 7010 32mm: unknown factory
Aquanaut 37mm: ZF
Aquanaut 35mm: PPF
Twenty~4 25mm: AW Factory

Audemars Piguet

Royal Oak 67540 37mm: RXW (super-rep)
Royal Oak 15450 37mm: JF
Royal Oak 77350 34mm: BF (SS, YG, RG, Two Tone)
Royal Oak 67650: JF (potentially out of stock)
Royal Oak Frosted 33mm: OMF
Royal Oak 67601 33mm: RF
Royal Oak Offshore 26231 37mm Chronograph: RXW

Cartier

Ballon Bleu 33mm: AF (if available, comes in white, pink and diamond bezel), otherwise 3KF
Ballon Bleu 28mm: AF, 3KF
Cle De Cartier 31mm: DR Factory
Cheetah series (27 x 37mm): GF, K11 factory, BVF
Must de Cartier (round): unknown factory
Panthere de Cartier (small 22mm): BVF
Pasha: 3KF, BVF
Santos 36mm: 3KF, GF
Santos-Dumont (medium 38 x 27.5): F1 factory
Tank Americaine: GSF
Tank MUST de Cartier (medium 33.7 x 25mm): F1 factory (red, green, white and blue dials), White dial also with bracelet, K11F
Tank Must de Cartier (small 29.5 x 22mm): F1 factory with bracelet (with and without diamonds), K11 Factory, DR
Tank Solo (small & medium): AF

Van Cleef & Arpels

Sweet Alhambra 4-leaf clover: VCA Factory
Charms Collection (25mm, 32mm, & 38mm): BVF
Pont de Amoureux 38mm: 5GF
Poetic Complication: VCA Factory
Lady Feerie: 5GF
Lady Arpels Ballerine Enchantee: 5GF

Hermes

Heure H watch 26 & 30mm: BVF
Kelly 2: unknown factory

Vacheron Constantin

Ladies Overseas 33mm: RXW. Good date font, comes in polished or diamond bezel.
Heritage 31mm: TWF

Jaeger LeCoultre

Rendezvous Night & Day: ZF super rep, all variations. GF/GOF is another good factory
Rendezvous Moon: CCF
Rendezvous Tourbillon: RMS
Reverso One 20mm: IMF (could also be TWF?)

Chanel

J12 Electro Dream: TWF
J12 33mm: KOR, East Factory
J12 38mm: KOR, East Factory
Code Coco: unknown factory
Camelia watch, with moving cover (multiple variants): VAV Factory
Mademoiselle Prive: TTF
BOY FRIEND: BVF
Premiere Rock Pop 16mm: BVF
Ruban Bow Tie: VCA Factory
Ruban Bow Bracelet: VCA Factory
Premiere: BVF

Omega

Constellation 24mm : 8848F, GF
Constellation 27mm: 8848F
Constellation 29mm: TWS Factory
Deville 27mm: BVF
Aqua Terra Seamaster ladies 34mm: VSF, RWF
Ladymatic: V6F

Chopard

Happy Sport all sizes (30mm, 33mm, 36mm): BVF, YF, LT Factory
Happy Diamonds: TF
Imperiale: unknown factory
L’Heure Du Diamant Round: unknown

Breguet

Reine de Naples: ZF (super rep)

Bvlgari

Serpenti: BVF
Divas Dream: unknown
LVCEA: BVF
B.ZERO1: BVF

Dior

La D De Dior 25mm: unknown factory
LA D DE DIOR ROSE CÉLESTE: “original Single” Factory (原单厂)
Gem Dior 27mm: TWF multiple dials

Piaget

Limelight Stella: CCF
Limelight High Jewellery 31mm: unknown factory
Limelight Gala: unknown

Gucci

Bee watch with two tone bracelet: unknown factory
GRIP watch 38mm: unknown factory
G-Timeless Cat Head: “original Single” Factory (原单厂)
Vintage Quartz flip cover: “original Single” Factory (原单厂)
Diamantissima 22 & 27mm: “original Single” Factory (原单厂)

Louis Vuitton

Tambour Monogram 34mm: AF
Tambour Horizon Smart watch: unknown factory

Source.

Guide to buying watches directly through Chinese sellers

Here is a long winded Q&A of what I've learned after purchasing about 20 watches on the cheap directly from Chinese sellers, bypassing DH and Ali. Don't be alarmed at the length of the tutorial, once you do it once it is pretty easy.

I'm just going to assume since you are reading this your native language is English. And as always do your own research, this is not financial advise.

How do I buy from China, I only speak English? Me too! Google translate is amazing. First thing you need is a buyer's website, I am using www.sugargoo.com. Super easy to register, and I use paypal for payment.
WTF is a sugargoo? I have no idea, but www.sugargoo.com is a website that will act as your personal shopper on China based websites. It looks like these websites sell to the people you are already buying from on DHgate and Aliexpress. Sugargoo is cutting out the middle man by buying for you direct.
I've registered on sugargoo, now what? You need to find that sweet automatic "roleplay" watch all the kids are wearing now a days. First try searching on a Chinese based website like www.1688.com. Don't even think about buying quartz either, people on this reddit will hunt you down and cut off a finger!
How do I search www.1688.com, I only speak English? This is probably the hardest part of the whole process. If using Chrome, it usually just translates to English and you can just type in what you want. YOU WILL GET WILD PRODUCTS IN THE RESULTS! Some NSFW, so be careful.
- I found the best way to search is by downloading an image of the watch. Could be an image of the gen watch or just one you found on DH gate that is out of your price range. Just use the camera icon in the search bar and select the image.
- Another trick is to use the Google box. Go to https://translate.google.com/ and type in what you want to translate to Chinese simplified. Try 'seamaster automatic watch' and it comes out 海马自动腕表
  - Take 海马自动腕表 and plug it into the 1688.com search bar, but make sure to switch back over to simplified Chinese translation first in Chrome. And Bam! You have a nice list of sweet Omega Seamasters to buy, but also some other weird watches pop in there too.
I found my dream Omega Seamaster but it's $160, I thought this was supposed to be cheaper??!! No silly goose, it's in Yuan. That's actually $25 (exchange rate is about 0.15)
Oh, cool that is cheaper. Now I can look like James Bond! No you cannot. James Bond wears a real Omega and is a rich athletic, super spy, that's slick with the ladies. YOU are buying "roleplay" watches, driving a 2009 Toyota, and can't do a single pullup.
All true, but I want to buy that sweet watch anyway. How? That is simple, just copy the first part of the web address of that watch from 1688.com and paste it into the sugargoo.com search engine. This is one I actually purchased, https://detail.1688.com/offer/687033449495.html.
Sugargoo says I have to add at least two watches to my cart, why? True, you are buying wholesale so most sellers require at least two watches. I typically find a seller that has various colors of a style I like and buy two. But I have been told on this Reddit, you can message the seller through Sugargoo first and ask to buy just one to check the quality. You can also add two to the cart and remove one before the final purchase. Then message the seller through Sugargoo after purchase. Only issue is, if the seller says no, the refund goes back as a credit on Sugargoo. Buyer beware. The message system is pretty quick and you can ask via the message button for any extras from the seller like watch boxes. Sugargoo is negotiating on your behalf.
Wow, shipping only takes 4 days. Sweet! Stop being obtuse, it only takes a few days for the seller to ship to Sugargoo. Not to you, who lives in a different hemisphere. Once Sugargoo gets your watches, they take purty pictures and post them for your enjoyment. You can then return those watches if you don't like the quality.
I love my Seamaster's from the pictures, how about shipping? There are a bunch of shipping options and time frames. Just click on the watches you want shipped and hit submit parcel. You can also research shipping cost under the 'estimate shipping' button. I typically wait until I have several watches to ship (Sugargoo holds your items for up to 100 days) and package them together. I just received package of 8 watches for $33 in shipping to the US. Beware, if you buy boxes to go with your watches the package will be too large for the cheaper shipping options. The cheap options have been very slow due to COVID (about 4 weeks). Here is a link to a discount code for redditers: https://www.reddit.com/r/Superbuy/comments/xd30hs/superbuy_long_term_discount_code_renew_again_add/?utm_source=share&utm_medium=web2x&context=3

Pros: Very cheap alternative to DH and Ali.

Cons: Wacky search engine, required to buy more than one watch, no reviews or actual pictures from buyers attached to those reviews. Source

Guide to Watch Glass

There are various materials used for watches that are labelled as “glass”. For example, plastics, mineral glass, sapphire coated mineral glass and pure sapphire crystal.

Mineral glass

We have to distinguish between untreated and tempered mineral glass. The chemical name is silicon dioxide (SiO2). Rock crystal and smoky quartz are closely related to mineral glass. By adding different oxides, such as aluminium oxide or boric oxide, mineral glass can be refined. This leads to better scratch resistance and hardness. In general, mineral glass is harder than plastic, it is neither osmotic nor does yellowing occur.

Though scratches cannot be as easily removed through polishing and the material can break. In the worst case, it splinters and can damage the movement and injure the person wearing it.

Mineral glass coated with a thin layer of sapphire

To compensate for the disadvantage of mineral glass, many manufacturers use mineral glass with a thin laye of sapphire, as this is only marginally more expensive. Erroneous, they often claim to have a ´sapphire glass´, which leads to significant misinformation of customers. The quality differences are huge compared to a pure sapphire glass. Therefore, when you are looking for a watch, you should always keep an eye on the type of sapphire glass that is used.

Plastics

As indicated by the name, the material consists of a plastic named polymethyl methacrylate (short: PMMA). This plastic is better known by the names Perspex, acryl glass, or hesalite glass. The main advantages of these materials are: They are very lightweight, relatively impact-resistant, easy to polish and quite cheap. The major disadvantage, given by the low density, is the significant vulnerability for scratches. UV rays and time may lead to yellowing of the material. Moreover, due to its osmotic characteristics, it can also be slightly water-permeable.

Pure sapphire glass

Although sapphire glass is transparent, the name “glass” is misleading. Sapphire glass contains a crystalline structure which makes it highly scratch-resistant. After the moissanite and the diamond, it is the third-hardest transparent material on the planet. Sapphire glass is made out of a pure synthetic sapphire (monocrystalline) which is produced from melted aluminium oxide (Al2O3). The production creates huge crystals which are cultivated by the means of electrolysis. Subsequently, the crystals are divided into slices and the shape of the watch glass is later time-consumingly cut out of these slices.

Consequently, domed sapphire glass is the best watch glass in the world. It might only break if extreme forces are encountered and can only be scratched with a diamond or moissanite. If you encounter any scratches on your sapphire glass, they are probably caused by aluminium and can be easily removed with a rubber.

Guide to Watch Clasps and Buckles

A watch clasp is essentially the security system that binds the ends of a timepiece’s bracelet or strap together. Just like all the parts of a timepiece, the watch clasp is a significant element. It plays a huge role in terms of making sure the watch fits and is kept safely on our wrists. Without it, we would not be able to keep any watch secured around our wrists, and having one would be quite pointless.

Pin Buckle

Error creating thumbnail: Unable to save thumbnail to destination

Pin Buckle of Hamilton Khaki Aviation Ref. H76645540

One of the most popular types of watch clasps is the pin buckle. We are sure you have encountered this type of traditional watch clasp in many timepieces. This watch clasp goes by several names, so you might be a little confused about what to properly call it. It is also sometimes known as the “tang buckle or the Ardillon buckle.” Regardless, these terms are interchangeable and essentially mean the same thing.

The pin buckle functions similarly to how waist belts are used. A buckle, made mostly from metals like stainless steel, titanium, or in some rare cases, platinum, rests on the shorter end of the strap. A pin, also known as the buckle tongue, is placed right in the centre of this buckle. While wearing the watch, the longer side of the strap, with various adjustment holes, passes through the pin buckle. The pin is then inserted into one of the adjustment holes, allowing it to accommodate wrists of any size. The strap is then secured by the free loops placed just below the pin buckle.

Folding Clasp

Error creating thumbnail: Unable to save thumbnail to destination

Folding Clasp of Rado Captain Cook Ref. R32105313

Just like the pin buckle, the folding clasp is one of the most frequently employed types of watch clasps. This watch clasp variant is most often seen on metal bracelets. Depending on what type of material the bracelet is made from, the folding clasp usually follows its construction as well. As such, it can be made using stainless steel, titanium, platinum, or ceramic.

The folding clasp is typically composed of three components that simply lay over one another when being fastened onto the wrist. The clasp is then sealed shut in place by one or two protruding bolts, which are fitted into a designated lock. For instance, the image of the Rado Captain Cook Ref. R32105313 above shows off an unlocked folding clasp with its laid-out sections. You can also see the two push buttons that are used to release them.

The folding clasp is one of the most convenient types of watch clasps and it renders the watch very easy to both wear and remove at the same time. However, this can be a drawback at times because of how easy it is to unlock the folding clasp. You might find that the folding clasp is prone to unintentionally snapping open while the watch is being worn, especially if you are engaging in vigorous activities that jostle the clasp.

Deployant Clasp

Error creating thumbnail: Unable to save thumbnail to destination

Deployant Clasp of Omega Seamaster Ref. 233.92.41.21.03.001

Compared to the previous entries, the deployant clasp is a slightly more complicated type of watch clasp that combines both the pin buckle and the folding clasp. This clasp is made up of a metal pin buckle on one end, one or two folding sections in the middle, and a spring bar on the other end. The spring bar is attached to the shorter side of the watch strap, while the metal pin buckle is inserted into the longer side of the strap, which has multiple adjustment holes.

Once you have selected the right adjustment hold that ensures a snug fit on your wrist, clip the metal pin buckle down. Like the folding clasp, the folding sections of the deployant clasp can be laid over one another and clicked into place. The longer side of the strap is then tucked into the free loops of the strap.

The deployant clasp is usually made from stainless steel and sold separately from the watch. It is quite rare to find a timepiece that comes with the deployant clasp. In fact, many watch wearers tend to dismantle the traditional pin buckles on their leather straps before installing deployant clasps as replacements. This is because deployant clasps are easier to wear and provide more security than the traditional pin buckle.

Safety Deployment Clasp

Error creating thumbnail: Unable to save thumbnail to destination

Safety Deployment Clasp of Breitling Superocean Ref. A17367D71B1A1

For those seeking a watch that will not easily slip off of your wrist, the safety deployment clasp is probably one of the most secure types of watch clasps you can find. It operates just how a traditional folding clasp does, but with an added layer of protection. The safety deployment clasp has an additional flap that is sealed on top of the folding clasp, functioning as a reliable double lock mechanism.

Cartier deployment clasp for leather strap.

For a dive watch like the Breitling Superocean Ref A17367D71B1A1, which has to withstand strong underwater currents, the extra flap of its safety deployment clasp serves as an improved safekeeping system. With this type of clasp, you will not have to worry about accidentally opening the lock of your watch’s folding clasp, even as you explore the cavernous ocean depths. In the unfortunate circumstance that you do accidentally jolt your folding clasp open, the flap provides an additional level of security that ensures your watch will not just fly off your wrist.

Butterfly Clasp

Error creating thumbnail: Unable to save thumbnail to destination

Butterfly Clasp of Cartier Santos de Cartier Ref. WSSA0009

The butterfly clasp, also known as the hidden folding clasp, is a wonderfully seamless and subtle design. This type of watch clasp consists of two folding metal hinges. When the butterfly clasp is locked, both of its components are hidden on the inside of the bracelet, so that its exterior is presented as a consistent, immaculate display.

As demonstrated by the image of the Cartier Santos de Cartier Ref. WSSA0009 above, upon closing the butterfly clasp, its two foldable sections are kept hidden underneath the bracelet. Since the lock of the butterfly clasp is kept on the inside of the bracelet, pressed against your wrist, it is harder to jostle or accidentally open it. As a result, the butterfly clasp tends to be safer and more secure than a regular folding clasp.

One downside, however, is that this design might feel a little uncomfortable on your wrist, especially if you are wearing the watch for long periods of time.

Error creating thumbnail: Unable to save thumbnail to destination

Butterfly Clasp of Cartier Santos de Cartier Ref. WSSA0037

By simultaneously pressing the two push buttons of the clasp in the middle, you can unlock the clasp. This results in the butterfly clasp spreading its two uniform, foldable sections out in a symmetrical manner, resembling the wings of a butterfly, hence the catchy name of the clasp.

Sliding Buckle Clasp

Error creating thumbnail: Unable to save thumbnail to destination

Sliding Buckle Clasp of Seiko 5 Sports Ref. SRPD69K1

The sliding buckle clasp gives its wearers an especially hassle-free way of putting on a watch. The buckle of this clasp usually lies in the middle of the longer side of the strap. You can adjust the buckle at any time by simply sliding it along the bracelet. Attached to the other end of the bracelet is the metal clasp, which clamps down onto the sliding buckle and securely locks it in place.

When wearing a watch with the sliding buckle clasp, all you have to do is press the clasp down onto the buckle until it clicks shut. If you find that it does not fit quite right, simply slide the buckle either up or down the bracelet, until you have found the proper length that best suits your wrist size. This type of watch clasp can be seen on watches with stainless steel mesh bracelets, such as the Seiko 5 Sports Ref. SRPD69K1.

Diver Clasp

Error creating thumbnail: Unable to save thumbnail to destination

Diver Clasp of Citizen Promaster Ref. NY0125-83E

The diver clasp, more commonly known as the diver extension, is a type of clasp designed solely for professional dive watches. The composition of the diver clasp is actually quite similar to that of the folding clasp. The only difference is that the diver clasp has an additional built-in adjustment tool located underneath it. This adjustment feature can be operated to allow for either a tighter or looser fit. This allows for easy, efficient adjustment of the bracelet’s length. This is especially useful for divers who have to wear diving suits while underwater.

An example of a watch with the diver clasp would be the Citizen Promaster Ref. NY0125-83E. In order to utilise the adjustment tool of this watch’s clasp, simply press the two push buttons on the clasp, and then slide it in a forward or backward motion to change the length of the bracelet to your desired size. The diver clasp is locked in place by tooth-like notches, which serve as a reliable security feature that keeps the bracelet safely around your wrist.

Glidelock Clasp

Error creating thumbnail: Unable to save thumbnail to destination

Glidelock Clasp of Rolex Submariner Ref. 116610LN

In every sense of the word, the Glidelock clasp is essentially the same thing as a diver clasp and serves the same function. The primary difference is that the Glidelock clasp is patented by Rolex and operates in a slightly different way. As a result, the Glidelock clasp is found exclusively in Rolex dive watches, such as the Rolex Submariners and the Rolex Sea-Dwellers.

For instance, take a look at the Glidelock clasp on the Rolex Submariner Ref. 116610LN, pictured above. From the image, you can see that this Rolex watch’s Glidelock clasp has a couple of adjustment notches situated in the middle of the clasp. The fit of this bracelet is altered by snapping out the removable side of the clasp and then pushing it forward for a tighter fit or backwards for a looser one. The clasp is then secured in place by the adjustment notches in the centre. Once you have found the desired bracelet length, all you have to do is snap the clasp close in the same spot where you opened it.

Jewellery Clasp

Error creating thumbnail: Unable to save thumbnail to destination

Jewellery Clasp of Gucci Horsebit Ref. YA139507

The jewellery clasp is seen quite frequently in watches that cater solely to women. As can be seen from the Gucci Horsebit Ref. YA139507 above, the jewellery clasp is made up of two components: the latch and the hole. In a nutshell, the latch on one end of the bracelet goes through the hole on the other end of the bracelet. The latch is folded over the latter, clicks into place, and snaps shut with its own built-in locking mechanism.

The jewellery clasp tends to be very slim and demure, exuding elegance and femininity. This is why it is often used in timepieces for women. However, one big disadvantage of the jewellery clasp is that it only comes with one hole that can be latched onto. As a result, it is absolutely impossible to adjust the bracelet lengths of watches with jewellery clasps. This can pose some difficulty when it comes to finding fashionable women’s watches with suitable sizes for your wrist.

Velcro

Error creating thumbnail: Unable to save thumbnail to destination

Velcro Strap of Omega Speedmaster Ref. 311.30.42.30.01.005

Velcro is not necessarily considered a traditional watch clasp, but in the context of helping to fasten a watch’s strap in place, it sure functions as one.

Velcro works in a simple hook-and-loop manner. One long end of the textile or nylon strap is attached to tiny hook fasteners, while the other end is embedded with loop fasteners. When these two surfaces are pressed against each other, they cling to each other, in turn achieving a firm and secure fit around the wrist. One advantage of having a Velcro enclosure is that it is highly adjustable and can fit all types of wrist sizes.

How a 2836 GMT Movement is Made

The only GMT movement that ETA produce is the 2893. Enterprising folks in far off countries have modified 2836 movements for quite some time with a homebrew GMT complication added to the movement.

You can also do a more complicated swap by taking the balance wheel, pallet fork and escape wheel and replacing them on the 2836 movement to gain a low beat movement.

Here you can see the original 2836 movement on the left. I have removed and replaced the following components with the original swiss parts on the 2846. These are parts that are modified by the chinese factories to allow the GMT function.

Part 2595 - Date Jumper Maintaining plate - This part has been modified slightly to allow for the modified Intermediate Date Wheel

Part 2543 - Intermediate date wheel - This has a small secondary gearing placed atop the original gear. This turns the GMT wheel during the normal cycle of time. It meshes with a gear on the underside of the GMT wheel.

Part 242 - Canon Pinion with Driver - Taller canon pinion to account for the additional GMT wheel.

Part 255 - Hour Wheel - as above, taller to allow for new GMT wheel.

Part 2567 - Day Corrector - originally the part to allow quick setting of the day disc. Replaced with a new bi-directional gear that allows quick setting of the GMT hand.

Error creating thumbnail: Unable to save thumbnail to destination

Seen below is the GMT wheel itself. The upper gearing meshes with the gear running where the day corrector normally would and the gearing on the underside runs off the intermediate date wheel. And finally as installed on the finished movement with the brass washer in place.

Error creating thumbnail: Unable to save thumbnail to destination

Genuine Rolex Watch Weight Guide

Gen Rolex Watches Weight Guide

Note:

Weight differences may apply for various reasons.

This article is not meant to be a definite weight list for Rolex watches.

The weights mentioned below are with a full-linked bracelet.

In some cases, the weights stated may or may not be full-linked.

Weight of Submariner 114060: 152.9 grams. 2 links removed.

Weight of Submariner 16618: 175 grams.

Weight of Submariner 5513: 119 grams.

Weight of Datejust 1601: 83 grams.

Weight of Datejust 116201: 145 grams.

Weight of Datejust 116233: 136.8 grams.

Weight of Datejust 41 126334 Oyster bracelet: 143 grams.

Weight of Day-Date 118206: 225 grams.

Weight of Day-Date 118209: 179 grams.

Weight of Deepsea Sea-Dweller 116660: 215 grams.

Weight of Sea-Dweller 16600: 147 grams.

Weight of Sea-Dweller 126600: 194 grams.

Weight of Daytona 116509: 200 grams.

Weight of Daytona 16528: 156 grams.

Weight of Daytona 116520: 140 grams.

Weight of Rolex Daytona 116500: 141 grams.

Weight of GMT-Master II 16718: 164 grams.

Weight of GMT-Master II 116710LN: 152 grams.

Weight of GMT-Master II 16713: 138 grams.

Weight of GMT-Master II 16710: 127 grams.

Weight of Rolex GMT-Master II 126710BLNR/BLRO: 140.04 grams.

Weight of Milgauss 116400: 150 grams.

Weight of Yacht-Master 16622: 146 grams.

Weight of Explorer II 16570: 126 grams.

Weight of Explorer II 1655: 118 grams.

Weight of Explorer 214270: 132 grams (one link removed).

Weight of Explorer II 216570: 156 grams.

Weight of Sky-Dweller 326933: 191.5 grams.

Weight of Sky-Dweller 326934: 174.6 grams.

Known Replica Watch Clasp/Bracelet/SEL Codes

78360 - GMT/Datejust - Non SEL Stainless Steel Oyster bracelet with clasp:

T10 - EBay Italian bracelet - Endlinks stamped 558B

93150 - Submariner - Non SEL Stainless Steel Oyster bracelet with fliplock clasp:

D12 - Raffles - stamped 62523H 18 - Bracelet stamped 70216 - Endlinks stamped 455b

MA11 - Yuki - stamped 93250 - Bracelet stamped 93250 - Endlinks stamped 448b.

Z10? - JKF/Cartel - stamped 76753? - Bracelet stamped 93150 - Endlinks stamped 580.

S9 - EBay Italian bracelet- Endlinks stamped 501B

93250 - Submariner - SEL Stainless Steel Oyster bracelet with fliplock clasp:

EO6 - JF - stamped 93250 - SEL engraved EO 93250.

EO6 - TC V1 - stamped 93250 - SEL engraved EO 93250.

DE6 - TC V2/WM9 - stamped 93250 - SEL engraved EO 93250.

PJ4 - TC V5 - stamped 93250 - No engraving to SEL.

PJ4 - TC V6 - stamped 93250 - ??

PJ4 - TC V7 - stamped 93250 - No

DE6 - BP - stamped 93250.

CL1 - Sean - stamped 93250 - ??

CL1 - TW Best - stamped 93250 - SEL engraved AD 93288. (Being sold by Detroit Watch Works as genuine. Although their SEL engravings show AD 93250. See here: https://forum.replica-watch.info/thr...-works.405198/)

CL10 - ARF - stamped 93253 - SEL engraved EO 93250 - *904L

93160 - Sea-Dweller - SEL Stainless Steel Oyster bracelet with fliplock clasp:

OP10 - BP - stamped 93160A - SEL engraved EO 93160A

EO10 - TC - stamped 93160A - SEL engraved EO 93160A

93253 - Submariner - SEL Bi-Metal Oyster bracelet with fliplock clasp:

CL1 - MBW - stamped 93250 - Bracelet stamped 93250.

OP3 - WM9 - stamped 93253 - Bracelet not stamped - SEL engraved 93253 (Wrapped)

OP10 - BP - stamped 93160A - Bracelet not stamped.

?? - Sean - stamped 93150 - Bracelet stamped 93250 - SEL engraved CL 93250 & 16613. (Wrapped)

97200 - Submariner - SEL Stainless Steel Oyster with Glidelock Clasp:

PJ3 - NOOB V1 2014/BP/REGMARINER - SEL engraved ??

2VU - NOOB V2 to V5 - SEL engraved RS 97200

1FY - NOOB V6S - SEL engraved G3Z 97200

ST9 - NOOB V7 - SEL engraved 80K 97200

ST9 - NOOB V7 - SEL engraved RS 97200

ST9 - NOOB V8 - SEL engraved RS 97200

ST9 - NOOB V9 - SEL engraved 80K 97200 - *904L

ST9 - NOOB V10 - SEL engraved G3Z 97200 - *904L

T1G - NOOB V10 - SEL engraved G3Z 97200 - *904L

1NQ - Noob V12 - SEL engraved RS 97200

ST9 - NAIL - SEL engraved 6YZ 97203 - *904L

ST9 - VRF - SEL engraved RS 97200 -

J9K - VRF MAX - SEL engraved ?? 97200 - *904L

ST9 - BP - SEL engraved RS 97200

PJ3 - BP - SEL engraved ??

6YZ - BP V2/GM Factory - SEL engraved ??

Y8C - ARF V1 - SEL engraved 590 97200

E5N - ARF V1 & V2 & V4 - SEL engraved 5VM 97200 - *904L

X7F - LF - SEL engraved 5WD 97200

PJ3 - JF V1 - SEL engraved ??

PJ3 - REGMARINER - SEL engraved ??

X0P - JF V2 - SEL engraved 590

ST9 - DJF - SEL engraved ?? - *904L

0HA - DJF - SEL engraved T4J 97200- *904L

6YZ - GMF - SEL engraved 6YZ 97203 - *904L

M7J - EXF - SEL engraved ??

7KY - ORF - SEL engraved ?? - *904L

C4R - ZZF V2 - SEL engraved P5M 97200 - *904L

C4R - ZZF V2S - SEL engraved RS 97200 - *904L

7QJ - RXF/XF - SEL engraved T2A 97200 - *904L

AOW - JDF - SEL Engraved AOW

7JG - VSF - SEL Engraved T2A 97200

8MY - ZF - SEL engraved H8A

1LD - Clean - SEL Engraved Z1R

97JB00 - Submariner 41 - SEL Stainless Steel Oyster with Glidelock Clasp:

1LQ - VSF - SEL Engraved 8XM 97JB00

H7Z - VSF - SEL Engraved 8XM 97JB00

H7Z - VVSF - SEL Engraved 7JG 97JA03

1LD - Clean - SEL Engraved T2A 97JB00

H2C - Green Maker - SEL Engraved 1LO 97JB00

U1N - EWF - SEL Engraved 3MK 97JB00

97220 - SD43 - SEL Stainless Steel Oyster with Fliplock Clasp:

453 - VRF - SEL engraved H4Y 97220

4RL - ARF - SEL engraved C4R 97220

4RL - ARF V3 - SEL engraved C4R 97220 - *904

C4R - Noob - SEL engraved ??

C4R - NOOB V2 - SEL engraved 0NW 97220 - *904

453 - GMF - SEL engraved H4Y 97220 - *904

98210 - DSSD - SEL Stainless Steel Oyster with Fliplock Clasp:

T4J - BP V2 - SEL engraved ??

Z6Y - ARF V2 - SEL engraved D2Y 98210 - *904

98220 - DSSD - SEL Stainless Steel Oyster with Fliplock Clasp:

T1U - ARF - SEL engraved 8UF 98220 - *904

78200 - GMT - SEL Stainless Steel Oyster polished centre links with Fliplock Clasp:

OP8 - Noob V2 - engraved 15/423 - SEL engraved OP 78200

5NF - Noob V7 - SEL engraved ??

5NF - Noob V8 - SEL engraved ??

71H - Noob CHS - SEL engraved ??

Y8C - JF v2 - SEL engraved ??

PJ1 - BP - SEL engraved ??

0HA - DJF - SEL engraved 6GF78200 - *904

T1G - Noob V9 - SEL engraved 6GF 78200 - *904

T1G - Noob V10 - SEL engraved ?? 78200 - *904

6MW - VRF 3186 Clone - SEL engraved 89K 97200 - *904

P3L - ARF 3186 clone - SEL engraved P3L 78200 - *904

5XZ - GMF - SEL engraved ?? 78200 - *904

69200 - GMT - SEL Stainless Steel Jubilee Fliplock Clasp:

6LX - DJF - SEL engraved A3W 62611 - *904

6MW - GMF - SEL engraved K8P 69200 - *904

6MW- BP - SEL engraved K8P 69200

6MW- Noob - SEL engraved K8P 69200 - *904

6MW- Noob - SEL engraved 1LD 69200 - *904

6MW - VRF - SEL engraved 1LD 69200 - *904

97203 - Submariner - SEL Bi-Metal Oyster with Glidelock Clasp:

Y8C - JF - SEL engraved 469 97203

6YZ - VRF - SEL engraved ??

2VU - Noob - SEL engraved PJ 97203 (Wrapped)

6YZ - BP- SEL engraved ?? (Wrapped)

78590 - Daytona - SEL Stainless Steel Oyster with Fliplock Clasp:

7CD - ARF - SEL engraved 9US 78590 - *904

5NF - Noob - SEL engraved ??

X0P - JF 7750 - SEL engraved ??

Y8C - JF v1- SEL engraved ??

X0P - JF - SEL engraved ??

7GT - BP v2 - SEL engraved ??

Y8C - JF v2 - SEL engraved E0 78493

OP8 - Phong - Clasp engraved 15/423 - SEL engraved AS 78490

Z1H - Noob 4130 clone - SEL engraved ??

T1G - Noob 4130 V2 - SEL engraved Z6S 78590 - *904

5NF - JH - SEL engraved C1Z 78590

7CD - GMF - SEL engraved ?? - *904

63600 - Datejust - SEL Stainless Steel Super Jubilee bracelet:

COC - ARF - SEL engraved 931 63600

CL5 - BP - Clasp engraved 72200 - SEL engraved ??

72600 - Datejust - SEL Stainless Steel Oyster bracelet with Oysterclasp:

7UM - ARF - SEL engraved UOP 72600A

3NY - BP - SEL engraved ??

70400 - Oyster Perpetual - SEL Stainless Steel Oyster bracelet with Oysterclasp:

7UM - JF - SEL engraved 7GT 70400

Anonymous

Search

⚠️ IMPORTANT NOTICE ⚠️ This site is no longer managed and is outdated.

For the most updated information head to: https://RepsGuide.com/guide/

Watches

Community Links

Watch Quality Tiers

Trusted Dealers List

Recommended Sellers List

New Sellers List

1688 Sellers List

Weidian Warriors Seller List

Introduction to Replica Watches

Step by Step Guide for Ordering a Watch

Glossary of Common Terms

Buying Replica Watches Common Q&A

Which Factories Make the Best Models

Rolex

Patek Phillipe

Audemars Piguet

Vacheron Constantin

Richard Mille

Omega

Cartier

Tudor

Jaeger-LeCoultre

Panerai

Breitling

IWC Schaffhausen

The 'Not Worth Buying In Gen' (NWBIG) Guide

What to look for in a Replica Watch Quality Check (QC)

Guide to Quality Checking (QC) a Replica Watch

How to Read a Timegrapher

How to set up your Manual Watch

List of Known Watch Factories

How to Identify Scammers & Avoid Scams

Wrist Watch Size Guide

Guide to the Best Budget Mid-Tier Watches ($250-$400)

Rolex

Audemars Piguet

Patek Philippe

Vacheron Constantin:

Tudor

Omega

Cartier

IWC

Jaeger LeCoultre

Panerai

Richard Mille

Guide to Watch Movements

Omega Buying Guide

Guide to Known Clasp Codes for Rolex

List of Trusted Watchsmiths

Beginner’s Guide to Clone Movements in Rolex Replica Watches

Guide to Movements in Audemars Piguet, Patek Philippe & Richard Mille

Guide to who Makes the Best Ladies Replica Watches

Guide to buying watches directly through Chinese sellers

Guide to Watch Glass

Guide to Watch Clasps and Buckles

Pin Buckle

Folding Clasp

Deployant Clasp

Safety Deployment Clasp

Butterfly Clasp

Sliding Buckle Clasp

Diver Clasp

Glidelock Clasp

Jewellery Clasp

Velcro

How a 2836 GMT Movement is Made

Genuine Rolex Watch Weight Guide

Known Replica Watch Clasp/Bracelet/SEL Codes

Navigation

Wiki tools

Page tools

Categories