Watches

Community Links

r/RepTime Reddit

r/RepTime BST Discord

r/RepTimeQC Reddit

r/ChinaTime Reddit

r/ChinaTime Discord

r/ChinaTime Buy/Sell/Trade Forum

Recommended Sellers List

Below is a list of sellers verified through the community as having a variety of content and confirmed legitimacy as a seller at r/ChinaTime tier. Their product quality will range from bottom shitter to high tier, based on your request, preferences, cost and QC approval.

These are different to a Trusted Dealer (or TD) at r/RepTime level, as these TDs go through a stringent review process

Last updated 5 Dec 2022.

WuWatch
Web: 

https://wuwatch.cartel.click/

Dhgate:

https://www.dhgate.com/store/21178530

WeChat: WuWatch-
WhatsApp: +86 199 2759 6945
Yupoo: N/A

Duke Jones
Web:

https://www.duke-jones.com/

WeChat: pmmhq520
WhatsApp: +86 176 0800 5834
Yupoo: 

https://p719583387.x.yupoo.com/albums

PW: 888888 (previously 666666)

HontWatch
Web: 

http://www.hontwatch.ru/

WeChat: N/A
WhatsApp: +86 131 1330 7655

The One Watches
Dhgate: N/A
Web:

https://www.theonewatches.io/

WeChat: The5711
WhatsApp: +86 170 8193 4955
Email: Theonewatches.ru@gmail.com

Jason007
Dhgate: 

https://www.dhgate.com/store/14498114

Web: 

https://u-onewatch.com/

WeChat: N/A
WhatsApp: +86 159 1439 7518 & +86 137 3343 7007

Btime
Dhgate: 

https://www.dhgate.com/store/20042879

Web: 

https://58vakcak.com/

WeChat: N/A
WhatsApp: +86 185 8882 2256

Hanbelson
Dhgate: 

https://www.dhgate.com/store/20777759

Yupoo: 

https://hanbelsonwatch.x.yupoo.com/

PW: 2021511

lkwatches
Dhgate: 

https://www.dhgate.com/store/19780983

Stas
Dhgate: 

https://www.dhgate.com/store/21229352

Bilibili_watch
Dhgate: 

https://www.dhgate.com/store/21059386

Yupoo: 

https://zywatch.x.yupoo.com

Luxurywatches 1
Dhgate: 

https://www.dhgate.com/store/21113018

Yupoo: 

https://kevin-snir.x.yupoo.com/

Fujimin003
Dhgate: 

https://www.dhgate.com/store/20539379

Yupoo: 

https://alan-123456.x.yupoo.com/albums

Watch GT01
Dhgate: 

https://www.dhgate.com/store/21347248

Joan007
Dhgate: 

https://www.dhgate.com/store/20952500

Hello_watch
Dhgate: 

https://www.dhgate.com/store/20223682

lussoreloj
Dhgate: 

https://dhgate.com/store/21441757

Mark1994
Dhgate: 

https://dhgate.com/store/20535850

== Trusted Dealers List ==

This is a list of Trusted Dealers for r/RepTime tier sales and have undergone a strict process to be approved as a TD.

The websites & email addresses listed here are the only one to be used. Any other website found online or in a post other than from the dealer itself are not recommended. Be careful, copycat websites are one of the most common scam out there and their addresses are very similar. Do your due diligence before making any online order.

Asian7750

https://www.asian7750.co

ChazingTime

https://chazingtime08.co/

Dealer Clocks

https://dealerclocks.to

Geek Time

https://geektime.watch/

HONTWATCH

http://www.hontwatch.ru

InTime Watches

https://www.intime06.co

Jtime Watch Store
https://jtime.io

Narikaa

https://narikaa.smugmug.com/

PureTime Watches International

https://PureTimeWatch.io

Silix

http://www.silix-prime.es

TheOneWatches

https://www.theonewatches.io/

Toro Bravo

http://www.trb88.club

Watch Eden

http://www.WatchEden.net

Trusty Time

https://trustytimewatch88.io/

Extended list:

https://forum.replica-watch.info/forums/trusted-rep-dealers.147/

Last update 9/1/2023

Introduction to r/ChinaTime

Welcome to 

r/chinatime

, a huge community of 

over twenty thousand

 diverse people who share two things in common: The love of great-looking watches and being really fucking cheap. In most places those two things couldn’t co-exist together in the same place, but Chinatime isn’t most places; here those two things don’t just exist happily together, they are a way of life™.

Replica watches are a weird thing. People from 

r/reptime

 love the word “replica” and get butt-hurt when their $400 Rolex is called “fake”. We can understand that, as those replica watches can truly be works of engineering themselves and can even be of the same quality as the pieces that inspired them. Here at Chinatime, though, we do not put on such airs. If our watches are fake-ass watches that cost less than some of my Uber trips, and that’s OK.

We could spend a lot more money on arguably better watches that look more like the originals, but there’s something truly rewarding about tracking down a treasure on 

Ali Express

 or 

DH Gate

 that looks close enough to the genuine article for $50 that one simply can’t be found when ordering one of the master-class Reptime watches. Sure, one day I’ll have an ARF* or Noob Submariner that would fool my Rolex rep, but for now my U1 Submariner fools my Uber driver and parole officer, and for now that’s good enough for me. Oh, it keeps good time, too, which is nice.

(* There will not be a full glossary at the end of this piece explaining most of the terms we use in this sub to talk about our awesome reps, but explanations will be peppered throughout. “Arf” and “Noob” and “U1”, for example, are all well-respected fake watch manufacturers in China.)

Getting started

If you’re here to learn more about this world, then that’s great, because this interest in cheap rep watches that you have may turn into a hobby, which may then turn into an obsession. I’ve made friends on this subreddit because that’s what like-minded people do when they all become fans of the same thing, and we’re happy you’ve decided to learn more with us.

Automatic vs Quartz

To get started it helps to know a bit about watches themselves, besides how they look. Most of the watches we talk about in this subreddit are what are referred to “automatic” watches. Most watches in the world are quartz, but for the most part they don’t carry much weight here, because most of the watches we’re interested in the fake-versions-of are automatics, not quartz. This is because quartz watches can literally be found in vending machines, but automatic watches have a degree of engineering and craftsmanship to them, even the cheapest of them. Also, most of the Swiss shit we can’t afford are autos, as well.

An automatic watch is simply one that is wound by the person wearing the watch simply doing their shit. There’s no battery; instead there is a rotor that is connected to the mainspring of the watch. As the wearer does whatever the fuck it is they do all day, their movement moves the rotor, which acts as a pendulum, which winds the watch, and then it tells the user what time it is so they can get home in time to catch their wife in bed with their boss. These are the important matters we deal with.

Not all the watches we deal with here are autos, but the vast majority of them are. Quartz units are generally relegated to the chronograph copies (which means “watches that are also stopwatches that you’ll never actually use”), though there are a few non-chrono quartzes peppered here and there, but not many.

The Rotor & Movement

The rotor of an automatic watch is mounted on what’s called the movement of the watch. The movement is not the sweep of the seconds hand but rather the name for the guts of the watch itself — the gears, the springs, the cogs, and everything else that makes a watch keep time. It is arguably the most important part of a watch to consider when making buying choices, so knowing a few basics can really help you to make the right choice when it comes time to buy your first watch.

For example, a large percentage of the watches on Chinatime will be built around a fairly generic movement called the 2813. The 2813 is a Chinese clone of the Japanese Miyota 8205/8215 movement, which is to be found in a number of Citizen brand watches, as well as high-end Invicta divers and many, many more. The Miyota is a well-respected and sturdy movement, but the 2813 clones not so much. The most famous of these clones is the DG2813, though the rest are made by several factories in China. Because of this the quality varies from movement to movements and thus watch to watch, since there’s very little in the way of quality control when the Chinese factories make our watches for us. This is part of why they’re so cheap, and really part of the fun and charm.

Fun fact! There is an ETA2813 that is an actual Swiss movement, and the Chinese 2813 (often called a2813 where “a” means “Asia”) may have started life as a clone of it, but it’s a Miyota clone now, so there we go.

So now you know what a movement is and why it’s important, but that’s not what you’re here to find. You’re here to find some timepiece that will act as either a panty-moistener or pants-tightener when you wear it around your town/school/cellblock/institution, and most people don’t care about the movement.

Finding the watch you want (or ‘W2C’ aka Want To Cop/obtain)

You probably instead already have a model of watch in mind that you’d like to find a cheap rep for, and there’s a really good chance that there’s at least some Chinatime-budget version out there for you. It’s just a matter of finding it, and that is where this subreddit shines, because chances are that some other cheap fuck had the exact same idea as you, and since so many of our users share their triumphs with the rest of us there’s a good chance you’re watch is linked to in one of the posts already here. I know most subreddits have a “search it first” mantra, and that’s because that shit works, so use it.

If your watch has been found and purchased before, and the users reported back here (which they should do, more on that later), then you can usually find in their post or comment a link to the watch they bought under the label of “W2C”, which stands for “Want to cop”, which is a weird phrase brought over from Chinatime’s big dickhead brother Reptime. Cop or w2c means to “get your hands on” and “want to” is something none of Harvey Weinstein’s victims ever said.

Using DHGate

So you find the watch, find the W2C link, and then you’ll be taken to a place to buy the watch. Usually that place will be DHGate, (or The Gate,) a Chinese website that’s sort of a second home for us here. That’s because The Gate has about a thousand vendors selling about a couple hundred (at least) different rep watches at a variety of price points, meaning that you’ll probably be able to find your watch there at the price you want.

DHGate is hard to navigate for most of us because it’s a Chinese website in English and they do a very poor job of quality control when it comes to organization of products. This may be on purpose — selling fake versions of real watches violates international law, and by not making it easy to find a particular watch they get a bit of reasonable deniability when questioned by the authorities. But with some practice, patience, help from here, and luck, you’ll be able to find what you’re looking for.

Fun fact! Buying replicas of real watches for a fraction of the price is understandably illegal in most countries, so all of us here are, technically, taking part in a huge act of fraud and/or larceny, you newly-minted criminal you. The good news is that Customs in most countries are far too busy with actual problems to really care about what we do here, so don’t sweat the whole petty felony thing too much.

So you’ve got your watch in mind, you’ve searched for the W2Cs on here and found a few, and even checked out the links on The Gate, which is awesome, because that means I’m doing a good job here. The next logical step is choosing which rep watch to get, and this is where things can get a bit tricky — not to mention sketchy.

This may surprise some of our more sensitive newcomers, but it has to be said: Not all of the vendors on sites like DHGate can be trusted! In fact, it’s best to assume that most of them are out to scam you, because it’s very easy to scam someone on the Internet from a completely different hemisphere, and it happens all the fucking time. But you don’t want it to happen to you, and neither do we, so this next part is for you: Do your fucking research.

Also, use our guide of trusted sellers.

There are a few vendors that we like to go to again and again (more on them later) because they are simply good to work with. Some of them might be a couple bucks more expensive here and there but it’s made up for with customer service and not getting your credit card charged for $2500 in the middle of the night in Hunan Province.

Navigate & Communicate on the ‘Gate

It’s worth noting that in Chinese culture there is (traditionally speaking) no such thing as “customer service”. Our western notion of sales customs, where the vendor caters to the customer, is not universal, and certainly not the norm in parts of Asia. This is an important thing to keep in mind, as things don’t always go smooth, and acting like a total Karen will get your messages blocked and you’ll never get a resolution. Always be respectful (but not a sucker) and things will go a lot smoother.

When looking over the different offerings from the different vendors, the two most important things you can do are:

• Ask us for advice, such as “has anyone else here ever dealt with ‘TittyBobbyJill20000057’?

• Check the customer reviews on the product you’re looking at!

As noted before, there are a lot of independent vendors on The Gate and the other sites, and chances are you’re not the first person looking for your particular watch, so learn from the mistakes and successes of those who came before you. Feel free to ask anyone here, and always — always! — check the customer reviews, especially if they have photos.

Fun fact! There are a few search terms you can use to find the watch you want since you generally can’t find them via their actual brand names because that just becomes blatant counterfeiting, and we can’t have that. For Omegas, search for “co-axial”; for Rolex, search for the model number; for Tag Heuer sports watches, search for “I have no taste in anything and will die alone”. Try it out yourself!

This is because very often the photos of the watch you see on the DHGate listing is not a photo of the actual watch you’ll be receiving. Often it’s the genuine (or “gen”) article in the photos, presumably to help shoppers find what they want. They will often have pictures of the actual units they sell mixed in, so check those, but make sure to check for photos of received units in the reviews, as these are unfiltered and unmoderated feedback directly from and to customers like you. It’s a great tool that will save everyone a lot of grief and headache if used correctly.

Asking for Quality Check (QC) Photos

In addition, reputable vendors are often happy to send you photos of the actual watches themselves if there are none in the reviews. Add to that the fact that we love doing our own reviews here, and you’ll be in good shape to buy the watch you want from a trusted seller and be very happy with it.

This, though, is where things get tricky. Since sites like DHGate and AliExpress are in China, not every bank or credit card vendor will work to place your order, so make sure that you have at least two different accounts to try from. In addition, keep in mind that there are sophisticated hacker-bros in China that would love nothing more than have access to a foreign credit card that works in their country easily. For my own purchases, I use my CapitalOne credit card via their Eno system which generates a one time “burner number” for each of my transactions. See if your cards or bank offer the same kind of thing if at all possible.

If you’ve found your watch, and you’ve found your vendor, and made your purchase, then you should have your watch — sometime in the distant future.

Shipping from China

Cheap quality watches are cheap by skimping on a few things, and one of those things is fast shipping. Most watches include free shipping, (via China’s EMS or ePacket services,) but that free shipping can take a long fucking time. It’s not uncommon for watches to take a month and a half to arrive, so if you’re in a hurry to get something for a certain event, like a court date, use one of the paid services (DHL, etc.) to get it faster. But keep in mind that you still might be in for a wait, because that’s how things in China work.

Some sellers are faster than others, and your research here should tell you which are known for fast shipments, so it’s worth taking into consideration when making your choice.

Customs & Replica Watches

Sometimes, though, things happen, and it’s far too common for things to go wrong on the shipment part.

Fun fact! Chinese people are a lot like you, only way more broke and oppressed. The average person there makes about $15k a year. The few bucks they make off of selling fake watches to the rest of the world is real money to them, so if things go wacky don’t automatically assume that you’re being scammed, just be aware that they’ll also do anything they can to not have to issue a refund, so be willing to work with them.

If your watch gets seized by customs then you’ll get a letter. Ignore it, tell your vendor, and they’ll generally send you a new one. This kind of thing is factored into their prices as the cost of doing business.

If your tracking number shows your watch going somewhere far away that’s not you, there are a few reasons why this can happen. If you’re shipping with DHL you should know that they often recycle waybill numbers (I’m not kidding, it just happened to me). It’s also possible the vendor just mixed up your tracking number with someone else’s, which is also common. Or, also too common, your vendor is trying to scam you. Do not let them off the hook.

Every case is different, so we won’t attempt to tackle a “how to” on dealing with problems like this on sites like The Gate, but enough people here have been through it that they’ll be happy to help you navigate it, since we hate when those fuckers try stuff on any of us.

Receiving Your New Watch

So let’s say you’ve managed to not fuck up all of the above. That means that your watch has arrived and you’re stoked, and you should be! The process isn’t the easiest, but the reward is worth it.

Wear your watch. Get to know it. Maybe you’ll need to re-size the bracelet (we can help walk you through that) or something’s wrong with it (that, too), or maybe you need to brag to some people (that would be us). That is why we do ask that you share it with us. (

Don’t forget the lume shot!

)

Take photos, videos, post a review, post a W2C link, and answer any questions others may have, because you were only successful because others pass on their knowledge to you, and it would be good to show the other newcomers how it works. It’s part of what makes this subreddit more than just a place to get links and instead a place that’s genuinely fun to waste time on.

We’re glad you’ve decided to take the morally ambiguous step towards becoming a Chinatime bro or bro-ette (for there are more rep-ladies here than one might think) and welcome you to the world of like-minded cheapskates who would still like to enjoy build quality and the classical aesthetics that go along with world class timepieces.

Written by u/SpaceForceAwakens

Introduction to r/RepTime

Welcome to Reptime! It’s a great place to hopefully help you find what you’re looking for. There’s a lot of information and it all depends on how far down the rabbit hole you wanna go, but you can get anything from the crappy DHGate/AliExpress $30 fakes, all the way to a top tier replica for $300-700. You can even go further than how it came to you from China by “frankening” the piece – adding genuine and other modded components to help the watch achieve a look ‘even closer to gen’.

Trusted Dealers

Trusted dealers have earned their way to that status – trusted – because they have a large customer base and are willing to go through investigations through the forums that have a tough and active moderation team (RWI, RWG, etc) if a sale goes awry.

I recommend if you are going to utilize a trusted dealer (which is the ONLY way as far as I’m concerned), make sure you have an active account on the forums and post there so that the moderation team can back your order. Trusted dealers get not a ton of dough from your sale, but they almost all offer a customs guarantee – you will receive a replacement watch for free if customs seizes it. Be nice and remember that they are doing work for you and should be compensated for that time.

The trusted dealer experience works differently for each one, but for the most part, the flow is as follows:

1. Order (either through their website, wechat/whatsapp, or through email). They are busy. Keep your emails short and to the point. Don’t ask too many questions.
2. Payment – some accept credit cards*, others primarily do crypto, Western Union, Transferwise and Moneygram. Some accept some of the more convenient services like paypal, but you typically have to be an upstanding member of the community for over a year.
3. Wait for QC. This can take 2-21 days depending on availability. Typical turnaround time is 2-7 days.
4. Once QC is received, these are pictures of the actual watch you will get in the mail. Make sure you check it for major defects. Don’t get too picky, remember that these are $3-400 replicas of $2k-60k watches, made by people who probably make a bit more than minimum wage in some cases. If a TD rejects a watch too many times, the factory or dealer they buy from will begin to refuse sending new watches and just offer a refund. I won’t get into how to approve QC, because you should be doing research on the model you want and what you want to look out for.
5. Once you approve QC, it will take 1-5 days for the TD to send it off to their courier. You can also ship via triangle shipping, which is a higher price, but recommended for European countries.
6. While in transit, the package has to make it through customs in China and customs in your country of origin. If it gets seized in your country, you will get a letter. Don’t respond to the letter ever, just send that to your TD and they will order a new one for you as part of the guarantee. If it doesn’t get seized, it typically takes 5-7 days from TD to your front door with freight restrictions globally, expect shipping time to take anywhere from 10 days to 8 weeks.
7. Enjoy the watch. Get a $20 watch service kit from Amazon or whatever and resize the bracelet.
8. DON’T TAKE IT TO A JEWELLER AND PRETEND IT’S THE REAL THING. They will lie to your face and make you think they think it’s real because its good customer service to make people feel good about themselves. They are trained to do that. Just some practical advice – take it or leave it – don’t tell your friends and loved ones that these are the real thing. It’s better to be honest. If you want to know the full reason, PM me, I’m happy to share why honesty is important.
9. What if your watch is broken upon arrival? You MUST make a log in on the forums where the dealer is a trusted dealer, and post enough there in order to log a ticket to file a dispute. They will not help you if you create an account after your issue arises with a TD. It is their rules.

* Some have reported credit card numbers being stolen after using at TD websites. While the TDs are trusted, sometimes the agencies/companies they use to process credit card transactions aren’t trusted. They try their hardest, but there have been slip ups in the past.

Source

Glossary of Common Terms

AD: Authorized Dealer who sells genuine watches.

AP: Audemars Piquet.

AR: Anti-Reflective coating. It is a coating that is placed on watch crystals to deflect glare. Can be single or double sided. Double AR can scratch as one layer is on the outside of the crystal.

B&R: Bell & Ross.

BCE: Short for Breitling Chronomat Evolution.

Beginmariner: An entry level Submariner. Referred to by other names such as Noobmariner and VIPmariner.

Bling: A watch encrusted with diamonds or jewels.

Breit: Short for Breitling.

BST: Buy, Sell & Trade

Builder: A Watchsmith or Watchmaker who builds watches from the ground up.

Bump: The process of bumping a thread back to the top of the new posts section because the poster feels it contains information they want others to see.

C1: A model of Concord watch.

CC: Credit Card.

CG: Crown Guard.

CN: Short for China or Chinese.

CNY: Chinese currency or Chinese New Year.

CONUS: Continental United States (See IN CONUS).

DD: Rolex Day Date

DHL: A shipper often used by the dealers.

DJ: Rolex Datejust

DRSD: Rolex Double Red Sea-Dweller

DW: Datewheel.

EMS: Express Mail Service. They are the usual courier for packages.

ETA: A Swiss movement used in watches. Also available as a China made clone. Gen (Swiss) ETAs are now very rare in reps.

Fakebreaking: A phenomenon wherein rep buyers constantly break certain models of watches. Even if the movements in those watches are commonly used in gens with no issues. This is caused by a failure to understand the limitations of a mechanical timepiece in general. Gen owners are usually not afflicted by this. An example would be the Rolex Daytona. (See Seconds @6).

Fedex: A package delivery service. NEVER USE THEM FOR REPS!

Fiddy: Panerai 127

Fidestro: Panerai 217

FM: Abbreviation for Franck Muller

Franken: A watch that has had genuine parts added to it in order to make it closer to the genuine counterpart.

Gen: Short for genuine watch.

Group Buy: A forum-wide mass buy where items can be purchased at a discounted price.

GBP: British Pound.

HBB: Hublot Big Bang.

HVS: High Value Sale.

Black Magic: An all black Hublot Big Bang.

IMO: In my opinion.

IN CONUS: A designation when something or someone is in the Continental United States. Also a designation in sales ads when someone will only ship within that area (See CONUS).

IWC: International Watch Company.

Lume: The material applied to a watch dial that makes it glow in the dark.

LV: Abbreviation for the Rolex anniversary LV (Lunette Verde) Submariner. Also used to describe Louis Vuitton.

Modded: A watch that has been altered from it’s OEM state.

Mods: Customisations applied to a watch.

Modder: Someone who performs aftermarket modifications to timepieces.

MOP: Short for Mother of Pearl dial.

NWBIG: Stands for ‘Not Worth Buying In Genuine’. A watch with a replica so good there is no point paying the real counterpart.

OEM: Original Equipment Manufacturer.

OP: Original poster.

PAM: Panerai.

PO: Short for Omega Planet Ocean.

POS: Piece of shit.

PP: PayPal. Also an abbreviation for Patek Philippe.

PVD: Physical Vapor Deposition. A particle vacuum coating process used on watches.

QC: Quality Control, Usually refers to the photos sent by a dealer to approve the watch you will be receiving.

Rehaut: The metal ring between the crystal and dial on a watch.

Rep: Short for replica.

RG/Repgeek: A replica forum.

Rollercoasting: When a watch hand has not been installed level. As it spins it moves up and down vertically like a rollercoaster and at some point touches the inside of the crystal jacking everything up.

Rollie: Rolex.

ROO: A model made by Audemar Piquet, the Royal Oak Offshore.

RWG.CC: A replica forum.

RWG.BZ: Our sister forum, often referred to as “The wild west of rep fora”

RWI: A forum full of autistic and rude old fucks that think elitism about fake watches is cool.

SEL: Solid End Link. A type of bracelet end link (the bit that joins the bracelet to the watch).

Slevin: Nickname for the IWC Aquatimer.

SMP: Short for Omega Seamaster Professional.

SOH: Breitling Superocen Heritage

SOSF: Short for Superocean Steelfish. It is not SFSO, SSFO, SOF or SF .

SV: Supporting Vendor. A Type of dealer.

Tag: Tag Heuer.

TNT: Another delivery service used by the dealers. Generally for air shipment.

Trustytime ’aka Andrew’: a dealer.

UN: Ulysses Nardin.

UPO: Short for Ultimate Omega Planet Ocean.

UPS: United Parcel Service.

USPS: United States Postal Service

V1/V2/V3/V20????: A term applied to each new version of the previously described ‘Ultimate/1:1/Exact copy’ that was released even though it was already perfect.

VC: Vacheron Constantin

W2B/WTB: Want To Buy aka Where can I find this watch so I can buy it.

W2C: Want To Cop aka Where can I find this watch so I can buy it.

Watch Expert: Someone who has extensive knowledge about timepieces. They are often also a Watchsmith, Watchmaker or Modder (See Builder & Modder).

WU: Western Union. Also ‘Wu’ which is short for the watch dealer WuWatch.

Yachtie: Short for Rolex Yachtmaster.

Guide to Watch Movements

Common movements used in rep watches

Non-chronos (i.e. if the watch has subdials, they will not work in the same way as the gen)

1. 21J/DG2813 (note that despite the “21J” description these movements usually run 23 jewels). This is a generic term used to cover a wide variety of cheap Chinese movements – some are better than others, but as a general rule they are low-beat (21,600vph / 6 ‘ticks’ per second) movements, very cheaply built (from as little as $7 for the whole movement) but generally reliable and easy to live with. Usually automatic, but occasionally hand wind, dependent on the watch. A lot of really nice budget watches come with these fitted and whilst the sweep isn’t as smooth as, say, a gen Rolex, they’re damned good value for money and can just be thrown away and replaced if they break or need a service.

There’s also the DG4813 variant, which is high-beat but this has become very difficult to obtain of late, so is not commonly seen. It has largely been replaced by the Z2 (see below)

2. Z2 aka ‘high beat 2813’ aka various other names. Some have suggested that this is one to avoid, but it’s not quite that clear cut. Basically a cheap 28,800vph alternative to the “Asian ETA” movements, these are occasionally swapped into existing models by the factories without informing the dealers. Reliability can be okay – provided you get a good one. The real issue is that there are no parts available, so servicing can be a problem. The Asian ETAs are a much better choice, but these are maybe worth considering if the price is right – just don’t be conned into buying high-priced reps with ’em, it ain’t worth it.

3. Asian ‘clone’ ETA (A2824/A2836 & variants): These are literally copies/clones of the equivalent Swiss (ETA) automatic movements. Generally high quality – although not as well built as the Swiss equivalents – but reliable and with parts generally available (which makes servicing an easier proposition than some other movements). High beat (28,800) and great value. Probably the best choice of movement for higher-quality reps as they give the smooth sweep found in most gen watches

4. Swiss ETA (2836/2824 as above): Supposedly the genuine ETA (owned by swatch group) swiss automatic movements. This is a complete lottery. ETA have not been supplying ebauches outside Swatch group for several years now. There are NO new ETA movements in reps any more – only refurbished (usually with Asian parts). On top of that, as anyone who’s been in the game for a while should know, factories tell the dealer the spec of the watch they’re producing – and the dealers then use that for their sales pitch. That spec often then changes dependent on what parts the factories have available on a particular day – about which they DO NOT inform the dealers. Given that dealers DO NOT take the back off the watch during QC (nor should they), they’re as much in the dark about it as you. At best you get a refurbished (i.e. used) movement with asian parts in it. I wouldn’t recommend spending extra for ETA in a rep these days – more often than not, you’ll be getting an asian clone.

5. Sellita: As mentioned above, supply of ETA movements is getting very difficult as Swatch group are no longer selling ebauches outside their own group of companies. Sellita are another Swiss company who make a very similar range of high-quality movements. We’ve seen a few reps with “Swiss ETA” being supplied with Sellitas, but they’re fairly rare.

6. Rolex 3135 copy (and other Rolex clone movements). This is an Asian clone ETA automatic movement with modified rotor and bridges to make it look more like the real thing. It’s not going to convince anybody who knows their Rolex movements and tends to be less reliable than the alternatives (as well as being more expensive!). There are newer versions beginning to appear which are a little more reliable and look closer to the gen, but they are still near impossible to service and generally inferior to the clone ETAs. Rolex have closed casebacks anyhow, so I really don’t see the point in paying the extra for what is, effectively, just a higher-priced and less reliable Asian clone movement.

There is one notable exception to the above – the Yuki-sourced movement used by JF in their new (as of 2017) high-end subs. This is a proper copy of the Rolex movements (to the extent of being compatible with a lot of gen parts) and is much better quality than the modified Asian ETA-based clones otherwise supplied in reps. A good movement and well worth consideration.

7. Miyota 9015. With the disappearance of gen ETA movements, some reps are now coming with Japanese Miyota-sourced movements. The 9015 is a case in point – a high-beat 28,800vph 25 jewel movement that is an excellent alternative to ETA or clone ETA models mentioned above. Highly reliable and very good quality. Don’t hesitate.

8. Miyota 8215. As above, a solid workhorse movement. The only gotcha is that the second hand on these movements tends to stutter a little and is therefore a lot less smooth than the 9015 or, say, an Asian 2836 clone. The amount of stutter is dependent on the weight of the second hand – the heavier/longer the hand, the worse it’s going to be. I’d certainly avoid this movement on watches such as Tudors which tend to have “snowflake” hands. Although the 8215 is reliable, for this reason I would tend to think carefully before buying a watch with this movement.

9. Sea-Gull. Sea-Gull are a chinese maker of both movements and watches. Quality is very close to that of the Swiss and Japanese manufacturers and they’re generally a very safe buy – they make clones of several well-known movements (such as the 6497) as well as their own designs. The ST2555 has lately been turning up in quite a few reps. As with Miyota, they’re a good choice. Don’t hesitate.

10. A6497/A6498: An Asian copy of the Unitas 6497 or 6498 movement. Common in Panerai and various others – it’s an ultra-reliable yet inexpensive hand wind movement available with or without swan-neck regulator. Note, however, that there are several different grades and some are better built than others. However, they’re easy to service and generally bombproof. Either 18,000vph (5 ‘ticks’ per second) or 21600 vph (6 ‘ticks’ per second) but it is hard to tell the difference visually due to the short seconds hand (where fitted). It can come with or without a seconds hand, but usually with. If it has a seconds hand, the 6497 has the seconds hand opposite the crown (i.e. at 9 if the crown is at 3) whereas the 6498 has the seconds 90 degrees to the left of the crown (i.e. at 6 if the crown is at 3).

11. Swiss Unitas 6497/6498: Again, a hand wind movement. They used to be found in some higher-end Panerai reps but that has now ended since ETA quit supplying ebauches outside Swatch Group some years back.

12. Molnija: Not common these days, but DSN and others have used them on occasion – mainly for vintage Panerai models. This is actually a Russian-built descendant of the Cortebert (latterly Rolex) hand-wind pocketwatch movements used by Panerai and others in the 40s-50s. Very high quality but parts can be tricky to obtain. Functionally similar to the 6497 above and generally reliable, but less robust than the 6497.

13. Asian 52010 aka Liaoning SL6601. This movement has started to appear in the IWC 5007 and could, of course, turn up in other reps with similar functions in due course. It supports secs@9, PR @3 plus date. Liaoning are another well-established Chinese maker of movements – quality is generally good, although parts can be difficult to obtain. Should be relatively easy to service and reliability appears to be decent.

Then there are a few that don’t fit any of the above groups. Movements advertised as “Asian 23J with power reserve” being probably the most common. These can vary from being basic 21J’s with an added module for the PR complication to something like Sea Gull’s 23J PR movement – the latter being of rather better quality than most other low-beat autos and likely to be long-term reliable. You’ll also see ‘Asian 35J” movements advertised fairly frequently – which can also be from a range of sources but are often higher-quality generic Chinese movements similar to the Sea-Gull mentioned above – not as good as a normal Asian clone or other mainstream movement and generally low-beat, but can be good value for money in the right rep. One last oddity worth mentioning is the A7750 as described below. This is sometimes used as a regular automatic movement with the chrono complications removed (most often in Panerai autos). In this form it is much less fragile and many of the caveats mentioned elsewhere no longer apply. Likewise you will – even more rarely – find the same non-chrono A7750 with the auto-wind mechanism removed. This essentially removes the fragile parts that can be damaged by hand-winding on the normal version and is, likewise, not subject to most of the caveats noted elsewhere.

Chrono movements:

Japan OS chrono (aka Japan Quartz aka a variety of other names): Basically cheap quartz chrono movements (i.e. battery powered). Reliable, great timekeepers, cheap. There’s a couple of varieties with different features, but quality is the same. If you can live with a ticking chrono hand (and seconds subdial) rather than the smooth sweep provided by autos, then there’s no reason not to buy one of these. Note that there are ‘smooth sweep’ quartz movements available and they very occasionally show up in reps. They’re a bit more expensive than regular quartz, but good quality. The smooth sweep applies to center seconds (i.e. the chrono hand) only, however – not running seconds in a subdial.

A7750 (occasionally called Asian Valjoux 7750): The standard automatic chrono movement used in a vast range of replica watches. Usually high-beat (28,800vph), but there is an older low-beat (21,600 vph) variant which still pops up now and again. Occasionally converted to hand-wind and also used in some non-chrono reps. Can be fragile and is difficult to service due to the lack of available spares. When serviced and running properly, however, it’s solid and works well. See the separate sticky about caveats as there are problems with some adaptations to this movement: 

http://www.replica-watches-guide.com/forum…?showtopic=6101

A7753: This is a variant on the A7750 and not a true clone of the Swiss 7753. Its primary difference from the A7750 is that its native position for subdials is 3, 6, 9 as opposed to 6, 9,12 for the 7750. The resulting lack of transfer gearing needed to move the subdials into the more common 3, 6, 9 position reduces the distance between datewheel and dial eliminating the ‘sunken datewheel’ seen on many reps. These movement also frequently feature a pusher (usually flush) at the 10 position which operates quick-set date. So far it has only made it into a handful of fairly recent models (notably Panerai). In other respects it shares the same strengths and weaknesses with its A7750 sibling, but the lack of transfer gearing does make it a little more robust in some cases.

A7751: This is a goodie as it replicates all the functions of the genuine Swiss movement including working moonphase complication. Found in a limited number of reps (notably a couple of Longines and Patek models). Should be treated gently but generally appears to be reliable.

Swiss Valjoux 7750: Used to appear in high-priced reps occasionally, but no longer available to the rep makers since ETA quit supplying ebauches to makers outside Swatch Group.

Copy Venus (or sometimes inaccurately described as Lemania). Actually a Sea Gull ST19 – fundamentally the same as the original Swiss Venus movement as Sea-Gull bought the original tooling. This is an excellent handwind chrono movement. Very reliable and feels like quality. The most robust chrono movement in reps outside of quartz options. Don’t hesitate.

Source

• 3Hz is also called 21600bph or 6bps, 4Hz is 28800bph or 8bps.
  The reason for this disparity (3Hz vs 6bps or 4Hz vs 8bps) is that the balance wheel advances the second hand both on the clockwise turn and counterclockwise turn, so a full turn cycle is 2 beats.

• Chinese 21J, Chinese 23J – no-name movements, based on DG2813 (if you’re lucky) or the Chinese Standard Movement and company, that the Chinese have perfected… mostly when it comes to cost of production – they can make a shitty versions for under 10 dollars, but you cannot expect any kind of reliability from it. The worst versions can be found in Chinese street reps and tend to break after a few months of use. If you ever see something like a Daytona with days of the week and month indicator on the subdials, you can bet it sports one of those bad boys.
  Some of the more reputable factories sometimes use movement called that and you can expect them to be of a passable to good quality then, but it’s still hit or miss.
  Most of them are 3Hz, some are 4Hz.

• DG2813 or other DG-something – firstly, it still might be the shitty movements described above (especially if called A2813), them being clones of DG movements, which are in turn clones of old movements from Citizen. If you get an actual DG2813, you should not expect amazing quality, but it is very reasonable for it to work for years (accuracy is another thing though).
  Most of them are 3Hz, some are 4Hz (e.g. DG4813).

• A2824, A2836 – the best of the best – ETA used to have factories in China, so the Chinese know how to produce the movements. The materials are somewhat worse than ETA required and the quality control is nowhere near what you would find in a gen Breitling or such, but they are reliable, any watchsmith can service or repair them, and replacements are freely available anywhere.
  They beat at 4Hz.

• A2892 – Chinese copy of a newer, thinner “version” of ETA 2824 – good movement, but way more rare and as such possibly slightly lower quality than the above two. Most of them will probably come from Sea-Gull, which would be good, but they might be QC rejects.
  They beat at 4Hz.

• A6497/A6498 – clone of ETA Unitas 6497/6498, great movement, simple, handwound, you are most likely to find one in a Panerai rep and you can’t really go wrong with this one.
  They beat at 3Hz.

• Swiss ETA 2824/2836/others – hit or miss – it depends on how the repmakers sourced it and how they stored it. I have a rep with a swiss movement and it performs beautifully, other people report the opposite – problems and having to replace. Could also get a Sellita instead of ETA (which is in no way a bad thing, Sellita is an excellent Swiss movement manufacturer and a former contractor for ETA).
  They beat at 4Hz unless vintage (check specific model) or Unitas 6497 – 3Hz.

• A775X (X is placeholder for other digits) – ETA Valjoux 775X clone, used in most rep chronographs. More costly to service and harder to source than other Asian ETAs, also more likely to break – all of this because it’s more complex. Check if the positions of the subdials were modified compared to the original – if yes, that’s a major yellow flag when it comes to relability and servicability. There are exceptions – ZF IWC chronos for example started using a sensible mod that you can safely go for.
  They beat at 4Hz.

• SA3135 – a modded A2836, may accept a genuine Rolex datewheel. Possibly the worst option you can get in a Submariner.
  They beat at 4Hz.

• SH3135, SH3131, VR3135 – Chinese “superclone” rolex movements, harder to service than A2836, but a lot of people prefer them because they can fit a genuine datedisc on them (not SH3131 because it has no date). Not actual superclones (as in there are differences between those and actual Rolex movements), but can be swapped for a genuine movement if you can get your hands on one.
  They beat at 4Hz.

• (S)A3186/(S)A3187 – modified asian ETA with contraptions that make it impossible to service and faulty. Best avoided, but currently the only way to get correct hand stack (as in order of hands seconds -> minutes -> 24hr -> 12hr) and setting method in Rolex GMT.
  They beat at 4Hz.

• A4130 – a weird mod of A7750 with subdials moved and possibly decorated, which is pointless in a closed-caseback watch. Comments about modified A7750s apply.
  They beat at 4Hz.

• SA4130 – either a complete superclone of Rolex 4130, or an ARF mod of A7750 – check if it’s from Noob Factory and expensive – if yes, its the former, otherwise the latter. ARF SA4130 simply doesn’t use the minutes and hours subdials (they are frozen) so there is little to no problem with added torque. If it’s not a new expensive Noob or ARF, it’s probably A4130 (described above) with an S tacked in front of the name.
  They beat at 4Hz.

• A8900/A8500 (in Omega reps) – movements modified to look like Omega calibers. Used to be modified ETA clones or even modified Chinese 21J/23J, but lately VSF started boasting a “superclone” version that gives the same functionality as gen. Some people seem to overhype those “superclones” as actual complete cloned movements – this is not actually the case, but they are reportedly more reliable than SA3186/SA3187s which strive to provide a similar functionality. Also, no rep Omega movements have the correct beatrate currently (3.5Hz), none have actual co-axial escapement (to my knowledge), and they use overlays with fake jewels, so take VSF’s “almost the same as genuine movement” with a grain of salt.
  They beat at 3Hz or 4Hz depending on the movement used as a base. VSF “superclones” beat at 4Hz.

• Sea-Gull movements – mostly good movements, but the versions used in reps are not exactly high end (more likely factory QC rejects or lower-tier versions).
  Check specific model to know beatrate.

• Miyota movements – mostly good movements, but the versions used in reps are not exactly high end (more likely factory QC rejects or lower-tier versions). People were high on Miyota 9015 at first (it’s thin like ETA 2892) because it made some thin reps possible, going as far as putting it in Tudor Pelagos for example, but in the end a lot of Miyota9015 reps have noisy rotors (unidirectional rotors can rotate in one direction freely so it’s harder to silence), so their expansion into the rep industry has been halted somewhat. Miyota 8125 is mostly an entry-level movement and often found in Submariner homages for example.
  Another thing worth mentioning is that SevenFriday reps use Miyota movements for a different reason entirely – the gens also do.
  9015 beats at 4Hz, 8125 beats at 3Hz, movements in SevenFridays beat at 3Hz (at least all of those I know about).

Source

List of Known Watch Factories

ZF: High quality factory for most non-Rolex watches. Overall a good factory with solid releases. Just starting to branch into AP and RM, and they are pretty good.

Noob / N Factory: NOW CLOSED 🙁 Noob factory is probably the most famous factory among others, they started a very long time ago and really developing their piece of replica. Noob makes a decent submariner, but have a great Daytona with clone movement, and a good pepsi insert. Besides Rolex, Noob also developing some brands like some Planet Ocean Omega, Blancpain, some Audemars Piguet models, and some Panerai model. Recently (5/12/21) Noob was hit very hard in a raid so their models are on hold for ~6 months (rumor on timeline).

VSF/V6F/XF/HBB/KW: re-opened. All fall under a common parent company, but VSF specializes in Omega and Rolex super-reps and Panerai, V6F does quite a bit of projects (though the name isn’t used much nowadays) and XF focuses on Audemars Piguet but recently ventured into Vacheron Constantin. HBB does Roger Dubuis.

ARF/JF: JF is the brand name of AP reps. High quality, great detail, though ZF is showing them a run for their money these days. JF also makes middle-high tier Rolex watches among others. ARF is a division that focuses on high quality Rolex releases that focus on finishing. Rumor that JF is closing.

JVS: Newer factory as of 2021, takes inspiration from VSF and aims to release high quality Rolex releases.

ZZF/Clean: Quality releases recently for Rolex. Rebranded to Clean factory. Be aware of fake

PPF: Supposedly family of ZF, but focused on Patek. Has the best current Nautilus

BP/GMF: BP is one of the OG rep factories. Has reps of most brands and models, and are at an affordable price. GMF seems to be a higher end brand focusing on finish, but sourcing from similar places.

MK/MKS: Focuses on IWC, Patek and Omega releases, though they have branched into other brands too.

TF: Specializes in tourbillons (hence “T” F), but most are 42mm and kind of thick.

GF: Originally started focusing on German watches (“G”F), but have branched into many other Swiss brands like JLC and Cartier. Creates ‘copy cat’ models for a bit cheaper, and sometimes surprises with improved details

FK: Makes quite a few reps, most are not very good or just barely miss the mark for one specific reason. However, their Breguet 5177 v3 watch is superb!!! So do not underestimate any release of theirs.

R Factory: Rolex

YLF: Connected to ZF, focuses on IWC

VRF: Specialized in the Rolex arena with an excellent sub, excellent new VR3135 movement, and gold wrapped subs too.

OMF: Focuses on middle tier quality and prices, but recently have high quality Omega releases

PF: Revolutionized the Nautilus market with the first thin Nautilus. However, they were recently outdone by PPF and 3K. Focused on Patek, but have other releases.

3K: Newer factory (as of 2020) that released a clone Patek movement.

JJF: Focused on Vacheron and Patek releases, came out with the great Overseas rep. Rumor is they shut down though.

TTF: tbc

GDF: tbc

Guide to Known Clasp Codes for Rolex

93150 – Submariner – Non SEL Stainless Steel Oyster bracelet with fliplock clasp:

D12 – Raffles – stamped 62523H 18 – Bracelet stamped 70216 – Endlinks stamped 455b
MA11 – Yuki – stamped 93250 – Bracelet stamped 93250 – Endlinks stamped 448b.
Z10? – JKF/Cartel – stamped 76753? – Bracelet stamped 93150 – Endlinks stamped 580.

93250 – Submariner – SEL Stainless Steel Oyster bracelet with fliplock clasp:

EO6 – JF – stamped 93250 – SEL engraved EO 93250.
EO6 – TC V1 – stamped 93250 – SEL engraved EO 93250.
DE6 – TC V2/WM9 – stamped 93250 – SEL engraved EO 93250.
PJ4 – TC V5 – stamped 93250 – No engraving to SEL.
PJ4 – TC V6 – stamped 93250 – ??
PJ4 – TC V7 – stamped 93250 – No
DE6 – BP – stamped 93250.
CL1 – Sean – stamped 93250 – ??
CL1 – TW Best – stamped 93250 – SEL engraved AD 93288. (Being sold by Detroit Watch Works as genuine. Although their SEL engravings show AD 93250. See here: 

https://forum.replica-watch.info/thr…-works.405198/

)
CL10 – ARF – stamped 93253 – SEL engraved EO 93250 – *904L

93160 – Sea-Dweller – SEL Stainless Steel Oyster bracelet with fliplock clasp:

OP10 – BP – stamped 93160A – SEL engraved EO 93160A
EO10 – TC – stamped 93160A – SEL engraved EO 93160A

93253 – Submariner – SEL Bi-Metal Oyster bracelet with fliplock clasp:

CL1 – MBW – stamped 93250 – Bracelet stamped 93250.
OP3 – WM9 – stamped 93253 – Bracelet not stamped – SEL engraved 93253 (Wrapped)
OP10 – BP – stamped 93160A – Bracelet not stamped.
?? – Sean – stamped 93150 – Bracelet stamped 93250 – SEL engraved CL 93250 & 16613. (Wrapped)
1LD – CF bluesy – SEL engraved ??
1RD – VSF bluesy- SEL engraved ??
SI9 – VSF YG – SEL engraved ??

97200 – Submariner – SEL Stainless Steel Oyster with Glidelock Clasp:

PJ3 – NOOB V1 2014/BP/REGMARINER – SEL engraved ??
2VU – NOOB V2 to V5 – SEL engraved RS 97200
1FY – NOOB V6S – SEL engraved G3Z 97200
ST9 – NOOB V7 – SEL engraved 80K 97200
ST9 – NOOB V7 – SEL engraved RS 97200
ST9 – NOOB V8 – SEL engraved RS 97200
ST9 – NOOB V9 – SEL engraved 80K 97200 – *904L
ST9 – NOOB V10 – SEL engraved G3Z 97200 – *904L
T1G – NOOB V10 – SEL engraved G3Z 97200 – *904L
ST9 – NAIL – SEL engraved 6YZ 97203 – *904L
ST9 – VRF – SEL engraved RS 97200 –
J9K – VRF MAX – SEL engraved ?? 97200 – *904L
ST9 – BP – SEL engraved RS 97200
PJ3 – BP – SEL engraved ??
6YZ – BP V2/GM Factory – SEL engraved ??
Y8C – ARF V1 – SEL engraved 590 97200
E5N – ARF V1 & V2 – SEL engraved 5VM 97200 – *904L
X7F – LF – SEL engraved 5WD 97200
PJ3 – JF V1 – SEL engraved ??
PJ3 – REGMARINER – SEL engraved ??
X0P – JF V2 – SEL engraved 590
ST9 – DJF – SEL engraved ?? – *904L
0HA – DJF – SEL engraved T4J 97200- *904L
6YZ – GMF – SEL engraved 6YZ 97203 – *904L
M7J – EXF – SEL engraved ??
7KY – ORF – SEL engraved ?? – *904L
C4R – ZZF V2 – SEL engraved P5M 97200 – *904L
C4R – ZZF V2S – SEL engraved RS 97200 – *904L
7QJ – RXF/XF – SEL engraved T2A 97200 – *904L
1NQ – EWF 41 mm – SEL engraved ?? 316L
UTN – EWF 40 mm – SEL engraved ?? 316L
1LD – CF Date / No Date – SEL engraved ?? 904L
H7Z – VSF Starbucks & Cookiemonster – SEL engraved ?? 904L
7GJ – VSF Date / No Date 40 mm – SEL engraved ?? 904L
H7Z – VSF 41 mm – SEL engraved ?? 904L
1LQ – VSF Date 41 mm Rehaut: 2R… – SEL engraved ?? 904L

6SH / 7GJ – VSF No Date 40 mm – SEL engraved ?? 904L

T1G – VRF Andrea Pirlo No Date 40 mm – SEL engraved “??” 904L

1NQ – GD Factory (low-tier) selled as VSF be aware!

97220 – SD43 – SEL Stainless Steel Oyster with Fliplock Clasp:

453 – VRF – SEL engraved H4Y 97220
4RL – ARF – SEL engraved C4R 97220
4RL – ARF V3 – SEL engraved C4R 97220 – *904
C4R – Noob – SEL engraved ??
C4R – NOOB V2 – SEL engraved 0NW 97220 – *904
453 – GMF – SEL engraved H4Y 97220 – *904

98210 – DSSD – SEL Stainless Steel Oyster with Fliplock Clasp:

T4J – BP V2 – SEL engraved ??
Z6Y – ARF V2 – SEL engraved D2Y 98210 – *904

98220 – DSSD – SEL Stainless Steel Oyster with Fliplock Clasp:

T1U – ARF – SEL engraved 8UF 98220 – *904

78200 – GMT – SEL Stainless Steel Oyster polished centre links with Fliplock Clasp:

OP8 – Noob V2 – engraved 15/423 – SEL engraved OP 78200
5NF – Noob V7 – SEL engraved ??
5NF – Noob V8 – SEL engraved ??
71H – Noob CHS – SEL engraved ??
Y8C – JF v2 – SEL engraved ??
PJ1 – BP – SEL engraved ??
0HA – DJF – SEL engraved 6GF78200 – *904
T1G – Noob V9 – SEL engraved 6GF 78200 – *904
T1G – Noob V10 – SEL engraved ?? 78200 – *904
6MW – VRF 3186 Clone – SEL engraved 89K 97200 – *904
P3L – ARF 3186 clone – SEL engraved P3L 78200 – *904
5XZ – GMF – SEL engraved ?? 78200 – *904
CF Oyster & Jubilee – SEL engraved “??” 904L

69200 – GMT – SEL Stainless Steel Jubilee Fliplock Clasp:

6LX – DJF – SEL engraved A3W 62611 – *904
6MW – GMF – SEL engraved K8P 69200 – *904
6MW- BP – SEL engraved K8P 69200
6MW- Noob – SEL engraved K8P 69200 – *904
6MW- Noob – SEL engraved 1LD 69200 – *904
6MW – VRF – SEL engraved 1LD 69200 – *904

97203 – Submariner – SEL Bi-Metal Oyster with Glidelock Clasp:

Y8C – JF – SEL engraved 469 97203
6YZ – VRF – SEL engraved ??
2VU – Noob – SEL engraved PJ 97203 (Wrapped)
6YZ – BP- SEL engraved ?? (Wrapped)

78590 – Daytona – SEL Stainless Steel Oyster with Fliplock Clasp:

7CD – ARF – SEL engraved 9US 78590 – *904
5NF – Noob – SEL engraved ??
X0P – JF 7750 – SEL engraved ??
Y8C – JF v1- SEL engraved ??
X0P – JF – SEL engraved ??
7GT – BP v2 – SEL engraved ??
Y8C – JF v2 – SEL engraved E0 78493
OP8 – Phong – Clasp engraved 15/423 – SEL engraved AS 78490
Z1H – Noob 4130 clone – SEL engraved ??
T1G – Noob 4130 V2 – SEL engraved Z6S 78590 – *904
5NF – JH – SEL engraved C1Z 78590
7CD – GMF – SEL engraved ?? – *904

63600 – Datejust – SEL Stainless Steel Super Jubilee bracelet:

COC – ARF – SEL engraved 931 63600
CL5 – BP – Clasp engraved 72200 – SEL engraved ??
K6G – VSF 41 mm SS – SEL engraved ??

72600 – Datejust – SEL Stainless Steel Oyster bracelet with Oysterclasp:

7UM – ARF – SEL engraved UOP 72600A
3NY – BP – SEL engraved ??
M8N – EWF 36 mm – SEL engraved ??
7UL – VSF 41 mm SS – SEL engraved ??

70400 – Oyster Perpetual – SEL Stainless Steel Oyster bracelet with Oysterclasp:

7UM – JF – SEL engraved 7GT 70400

Below are some models which I added:

Day-Date 36/40 – Clasp-Codes Stainless Steel plated / non-plated with presidential Bracelet:

7GT – BP 36 & 40mm 316L – SEL engraved “??”
7GT – GMF 904L – SEL engraved “??”
2EM – EWF – SEL engraved “??”
7GT – Noob – SEL engraved “??”

Yacht-Master I 37-/ 40-/ 42 mm -Stainless Steel plated / non-plated with Oysterclasp:

W5T – 226659 VSF 42 mm Rubber/SS – SEL engraved “??”
5XZ – 226659 GMF 42 mm Rubber/SS – SEL engraved “??”
9AX – 268622 ARF 37 mm SS – SEL engraved “??”
7CD – 116622 ARF 40 mm SS – SEL engraved “??”
3DD – 116622 Noob 40 mm SS – SEL engraved “??”
5XZ – 116622 BP 40 mm SS – SEL engraved “??”
7CD – 116621 ARF 40 mm RG – SEL engraved “??”
6OD – 116655 ARF 40 mm Rubber/RG – SEL engraved “??”
138 – 116655 Noob 40 mm Rubber/RG – SEL engraved “??”

BECAUSE THERE ARE ACTUALLY FAKES OF FAKES I WILL MENTION THEM ABOVE:

1LD – 11661X FAKE CLEAN SUBMARINERS – rehaut engraved “U9N5” (here is important, that the fake CF has 1LD smaller than “Steelinox”)t
he stickers are not that clean than the real ones. 

FAKE CLEAN CAT

 and 

FAKE CLEAN MONKEY

 and 

THIS

2R2 – 126619LB FAKE VSF COOKIEMONSTER – 

/u/pmtu´s mentioned thread

 and 

Guide to distinguish a real CF by /u/LinxujiaSource

List of Trusted Watchsmiths

The Rules as follows for the process of becoming a watchsmith, and what we hold as an agreement with each and every watchsmith that becomes trusted.

• 1 – ID verification

• 2 – Sticked post on your own profile stating services that watchsmith provides.

• 3 – Information about the movements watchsmith has experience servicing.

• 4 – Rough public estimate of the cost of service (price range).

• 5 – After becoming a TWS (Trusted Watchsmith) At least 2 monthly contributions to the subreddit that are educational in nature.

• 6 – Warranty on all the services provided by the watchsmith (water damage is not included)

• 7 – Provide proof (photos) to the client about the services performed

• 8 – Open a sticky for customers feedback

• 9 – Before becoming a trusted watchsmith you will be vetted by mod’s and Watchsmiths alike.

Source

TRUSTED WATCHSMITHS *This will be updated as more become available.

CONUS:

u/TButtery

u/Navichief

u/P4GTR

u/Oascom

u/MajorWilliams

u/WingTrim

EU:

u/Nikz19_WatchService

u/Noleex_The_Modder

UK:

u/UnderTheDial

Source